12 February 2021, 04:17 | #81 | |
Registered User
Join Date: Jan 2021
Location: Seattle WA
Posts: 1
|
Quote:
https://github.com/Bloodmosher/Amiga...Slot-RGBtoHDMI |
|
12 February 2021, 10:49 | #82 | |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,356
|
Quote:
Ah, no they are here https://github.com/hoglet67/RGBtoHDM...r/VideoSlot/V1 |
|
12 February 2021, 11:42 | #83 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,406
|
I have a v1 installed in an A500. What an awesome little gem this is! I do see weird blue dots flickering in Kick Off 2 Final Whistle. Anyone else has similar artefacts?
|
12 February 2021, 12:23 | #84 |
French in Australia
|
It seems that German engineering is redesigning the adapter to fit better in A500... more to come.
|
13 February 2021, 00:18 | #85 | |
Registered User
Join Date: May 2020
Location: Iowa, USA
Posts: 150
|
Quote:
Meh. Why use surface mount when you have an entire card to work with? I'm drawing my own with through hole components. |
|
01 March 2021, 21:49 | #86 |
Registered User
Join Date: Aug 2020
Location: Torquay
Posts: 166
|
I have one of these to assemble, but nowhere seems to have U4 (TLV74333PDBVR) in stock. Is there an alternative part I can use?
|
01 March 2021, 21:55 | #87 | |
Registered User
Join Date: Aug 2020
Location: Torquay
Posts: 166
|
Quote:
https://github.com/c0pperdragon/Amig...ideo/issues/29 |
|
01 March 2021, 23:55 | #88 |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
You do not actually need U4. You can use the 3.3v generated by the Pi so it is not needed. i released the Gerber files for the A600 on the Github page, tested and works good and is "relatively" easy to solder. I did up a design that will fit in the a500, a1k and a2k. and will release them after a good testing.
https://github.com/c0pperdragon/Amig...ideo/issues/37 I do have a few of these left over so if anyone wants blank or premade let me know. It is too expensive to ship to Europe so probably only good for those people living in N. America. Last edited by kipper2k; 02 March 2021 at 00:16. |
02 March 2021, 21:16 | #89 | |
Registered User
Join Date: Feb 2015
Location: Sweden
Age: 50
Posts: 2,953
|
Quote:
|
|
02 March 2021, 22:30 | #90 |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
Thanks for the kind words. I think i have figured out how do slightly modify so there will be no need for the end user to to any soldering
Will take a week to test etc providing i don't get distracted |
03 March 2021, 04:41 | #91 |
French in Australia
|
Amiga Digital Video HDMI for the A500 and A600
Bloody interesting news, keeper2k.
Very curious about your new great solutions here! Last edited by seb132; 03 March 2021 at 16:54. |
09 April 2021, 11:30 | #92 |
Registered User
Join Date: Jan 2021
Location: PL
Posts: 6
|
Hello All, any thoughts why my Rpi HDMI output looks like this:
https://www.dropbox.com/s/o5k97524al...ture2.png?dl=0 (Amiga test kit screen visible on composite A500 out) |
09 April 2021, 11:37 | #93 |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
What RGBtoHDMI have you got? What Denise version - have you set the jumper set correctly, if you've got the v2 board.
It looks like there is interference with the sync signal - so check that signal and pins are OK on the RGBtoHDMI board. |
09 April 2021, 11:54 | #94 |
Registered User
Join Date: Jan 2021
Location: PL
Posts: 6
|
I have Jumper set to Denise (8362 chip on board), adapter PCB V2 version. Picture is flickering and splitted in 4 as you see. Tried to play with Rpi prefs menu but with no luck.
I soldered 74HC86PW instead 74LVC86, can this be fault? |
09 April 2021, 12:08 | #95 |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
I think you are meant to use 'HCT' parts (instead of 'HC'), which are are TTL logic compatible. This is possibly why you are having this issue.
However, for the VLC parts alternative, I have used VHC parts instead, which are slower and fixed some pixel sparkles issues that I had. |
09 April 2021, 13:39 | #96 |
ex. demoscener "Bigmama"
Join Date: Jun 2012
Location: Fyn / Denmark
Posts: 1,624
|
HC aren't 5V tolerant when powered from 3,3V.
HCT are TTL compatible, but must be powered from ~5V, so they won't work either. Additionally, HC(T) are much slower than LVC - how much of a role that plays with your issue, I'm not sure. Use LVC, VHC or AHC parts - the latter two may work better when using ribbon cables or adapter pcb's (they have limited output drive which reduces reflections on long traces). |
13 April 2021, 19:21 | #97 |
Registered User
Join Date: Jan 2021
Location: PL
Posts: 6
|
Okay, I replaced 74HC86PW with 74LVC86. Now it works, but quality is not great.
I got strange purple shadows: https://www.dropbox.com/s/hyivydotms...ture9.png?dl=0 |
13 April 2021, 20:32 | #98 |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
Have you set the jumper to Denise?
Also, make sure you clean all the flux off. Using a multimeter, if you measure resistance to ground, do you get any readings on any of the Denise header pins? |
14 April 2021, 19:38 | #99 |
Registered User
Join Date: Nov 2018
Location: København Ø / Denmark
Posts: 6
|
Hi All
I have also managed to fabricate an RGBtoHDMI, and I'm very pleased with it. I have made a little cover that holds an HDMI output connector. It is designed in such a way that it just clips on the A500 without the need to modify the case in any way. If it has any interest I made it publicly available to download the STL from Prusaprints https://www.prusaprinters.org/prints...-for-amiga-500 Regards |
14 April 2021, 19:49 | #100 | |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga Digital Video | AJCopland | News | 24 | 10 February 2021 19:28 |
Digital video out options for AA3000+? | matt3k | support.Hardware | 2 | 17 December 2020 04:40 |
Vampire 500 v2+: Is all video HDMI yet? | Starglider 2 | support.Hardware | 37 | 06 April 2018 14:25 |
Review of No-name S-Video/composite NTSC to HDMI@720p Video scaler unit | aperez | support.Hardware | 6 | 03 January 2011 19:39 |
Digital signals on Amiga video connector | whitebird | support.Hardware | 7 | 26 September 2010 15:34 |
|
|