20 January 2007, 19:06 | #1 |
Zone Friend
Join Date: Jun 2006
Location: Sakskøbing / Denmark
Age: 51
Posts: 20
|
TEKNO AMIGA application disk
Hi all
I just got the packed from a friend, but he has lost to application disk. So if any of you have a copy and will upload it to the Zone I will be very gratefully. I found a picture on the net of the packed so you can get a idée of what its about Best regard to you all |
20 January 2007, 19:20 | #2 |
.
Join Date: Oct 2004
Location: Ioannina/Greece
Posts: 5,040
|
what is this for????
sorry obviously I can't help with the disk... |
20 January 2007, 21:54 | #3 |
Zone Friend
Join Date: Jun 2006
Location: Sakskøbing / Denmark
Age: 51
Posts: 20
|
Hi
It's an electronics experimentation kit. It has been used as a relay controller etc. |
20 January 2007, 22:02 | #4 |
Zone Friend
Join Date: Jun 2006
Location: Gargore
Age: 44
Posts: 17,789
|
You can build flux capacitor.
|
20 January 2007, 22:22 | #5 |
Registered User
Join Date: Mar 2006
Location: Germany
Posts: 899
|
The developer has still some pages about Tekno Amiga: http://www.catus.se/skolprod/laromed...a/TAMeny1.html. It seems you can get the disks with the fourth link there. You have to enter some code. At least that's what I understand, I used Swedish to English translation at: http://www.systransoft.com/index.html
Edit: just tried to enter something as code, seems they have the database for it not working anymore. Maybe emailing them helps. Last edited by thor; 20 January 2007 at 22:29. |
21 January 2007, 09:37 | #6 | |
Zone Friend
Join Date: Jun 2006
Location: Sakskøbing / Denmark
Age: 51
Posts: 20
|
Hi
Quote:
It's seems like I can get a copy of the disk from there Ill will try this today. Best regards Lumby |
|
04 October 2010, 18:21 | #7 |
The Headstrong
|
How did it go?
I thought I should make adf:s out of my three disks, I just picked up a Tekno Amiga this weekend. |
03 October 2013, 20:47 | #8 |
The Headstrong
|
As I sold the one I picked up a few years ago I documented it with photos and measurement and finally built one myself, it had a photo copy of the manual that I kept as well. Disks were archived, disk labels scanned.
If anyone wants the board files and schematic for EagleCAD, let me know. Here's the result, I was planning to use a breadboard for experiment area, the original has coil springs on a plastic board with drilled holes. Haven't decided on a DIL connector or a one row pin header. Breadboard: My Tekno Amiga board: Couldn't find the kind of connector that's meant to be connected to a machine so I had to remove the screws and put ordinary ones there to hold the metal piece. Double SIL resistors because I couldn't find any 22k at my supplier so I connected two 47k in parallel, measures 23k3 so that's OK. The original board is one sided without solder mask (green paint), I decided to add a ground plane on both sides and instead of a jumper I utilized the double sides. Catus seems to work with cakes now-a-days, the ones with photos printed on them. |
11 September 2023, 16:24 | #9 |
Registered User
Join Date: Jul 2022
Location: V. N. Gaia
Posts: 1
|
I really would like to try and build this interface.
Can you send me the board files and schematic? Also I can't seem to find the adf fikes. Thanks. Helder (Portugal) |
15 September 2023, 11:15 | #10 |
Registered User
Join Date: Sep 2009
Location: Sweden
Age: 43
Posts: 58
|
Hi.
Just stumbled across this thread. If anyone still is interested in the 3 Disks of TeknoAmiga in adf format, I have them. |
15 September 2023, 11:24 | #11 |
HOL/FTP busy bee
Join Date: Sep 2006
Location: Germany
Age: 46
Posts: 32,179
|
|
17 September 2023, 20:44 | #12 |
Registered User
Join Date: Sep 2009
Location: Sweden
Age: 43
Posts: 58
|
Uploaded them to "the Zone".
Note that they are in Swedish language. But I think they should be straight forward for non Swedish speaker as as well. |
18 September 2023, 07:29 | #13 |
HOL/FTP busy bee
Join Date: Sep 2006
Location: Germany
Age: 46
Posts: 32,179
|
Thank you very much I've also added the disks to the file server.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question regarding ADF to Amiga Floppy using DMS application | Kenan | support.Hardware | 25 | 09 May 2013 10:35 |
How to copy an application to an emulated disk. | Morbane | support.Amiga Forever | 0 | 29 December 2011 08:25 |
I'm looking for an application | Narf the Mouse | request.Apps | 33 | 27 May 2011 20:05 |
Amiga Application museum | onkelarie | News | 42 | 21 December 2009 08:25 |
Italian Demo: Tekno Merda (megarare) | andreas | request.Demos | 22 | 10 June 2005 22:23 |
|
|