21 January 2010, 23:11 | #1 |
Tiddlypeeps
Join Date: Oct 2009
Location: Ireland
Posts: 67
|
Trouble Installing ClassicWB
Hey im not very familliar with the Amiga so I am having a little trouble installing classicWB. I have an A1200 but I am just using the winUAE emulator at the moment.
Here are the steps that i have taken so far; I set up a windows folder to be a hard drive in the winUAE properites, I labeled the Hard drive DH0. I put the system.hdf file in this folder. In the floppy drives section I set the DF0 to open the Real_Amiga_Install.ADF file. Then I click start, and I enter a window that says welcome to the classicWB install to press return to enter. It then says it will attempt to unzip DH0:system.zip Then it says installing for a while, then a bunch of error messages appear but they disapper too quick to read. Then it says No trashcan detected - moving on... Thanks for installing classicWB Would you like to delete system.zip i type n and then it says installation complete. Please remove the install disk and reboot. I do this and nothing happens, nothing is installed into the windows folder that i was using as the DH0 hard drive, and when I boot winUAE without a boot disk it just boots into AmigaDOS. Anyone know what im doing wrong? |
21 January 2010, 23:18 | #2 |
Global Moderator
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
|
This is what you're doing wrong:
You need to mount the hardfile as a hard drive, not the Windows folder containing it. To do this hit the Hard Drives tab in the WinUAE GUI, choose Hardfile and navigate to the folder containing the system.hdf file, select it and press OK. |
22 January 2010, 00:48 | #3 |
Professional slacker!
|
Also you don't need the 'Real_Amiga_Install.ADF' to install on Winuae. Just mount the HDF as prowler says. When you run winuae the setup/activation screen for Classic Workbench will be displayed and you'll be asked to insert a 3.0 or 3.1 workbench disk. Asuuming you have the ADF for that mount it and press enter to continue.
If you choose to upgrade to 3.1 you'll need to mount all the 3.1 disks when prompted if you choose not to upgrade it will just activate off the 3.0 or 3.1 ADF. Once its finished activating it will promt you to remove the ADF and reset. It will then load into classic workbench If you want to put it on your real amiga just copy all the files from the HDF with DOPUS to your amiga hard drive under winuae (I connect mine with a USB-IDE adapter) if you have a CF card for a hard Drive you can use a card reader. Your Amiga hard drive or CF must be formatted with HDToolbox first unless its already had workbench on it before. In that case as long as you have no important data you can just delete all the files and then copy accross the files from your newly activated Classic Workbench. Hope I make sense... Steve. |
22 January 2010, 01:17 | #4 |
Global Moderator
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
|
Yep, that makes great sense!
Thanks for the follow-up, Steve! (I couldn't remember the rest of it.) |
22 January 2010, 07:31 | #5 |
Senior Member
Join Date: Jul 2004
Location: Nagoya, Japan (moved!)
Age: 41
Posts: 746
|
you should also plug in the amiga hard drive and set it up WITHIN the amiga, NOT the PC .. you only need the workbench install 3.0 or 3.1 disk to do that ;-)
if you dont do that to your drive before you plug it into the PC, its a batch to get it to run properly within winuae |
22 January 2010, 09:09 | #6 |
Professional slacker!
|
I've installed over a dozen times, different versions, setups, etc.
Never had any problems getting it to run in winuae. Its musch easier to do all the donkey work in winuae then transfer the finished product to the real Amiga. Just my 2 cents. |
22 January 2010, 20:10 | #7 |
Tiddlypeeps
Join Date: Oct 2009
Location: Ireland
Posts: 67
|
How do i set the hardfile as the highest priority to boot?
I load the system.hdf as a hardfile and i load the workbench3.1 disk into the first floppy drive because this is requested by the classicWB install, but the floppy drive seems to have priority because it boots into it instead of the classicWB. |
22 January 2010, 20:19 | #8 |
Professional slacker!
|
you need to insert the 3.1 disk after you have booted from the HDF so when you are prompted to insert the disk hit F12 and mount the workbench disk then return to your emulation without restarting. Hit return and follow the rest of the instructions on screen.
|
22 January 2010, 20:21 | #9 |
Global Moderator
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
|
If you have a hard drive assigned and floppy disk inserted when you boot the emulation, it will always boot to the floppy disk.
To get around this, mount the hardfile and boot the emulation without the floppy image inserted. When the emulation boots, press F12 and hit the 'Floppies' tab and insert your disk image in DF0: and press 'OK' Alternatively, you can boot the emulation with the floppy image inserted in DF1: instead of DF0: Edit: Beaten to the post by fitzsteve! |
22 January 2010, 20:45 | #10 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
Thanks for trying out the packs Tiddlypeeps, but what's so hard about the instructions: http://classicwb.abime.net/classicweb/instructions.htm
It even has a few pics, although I do admit the webpage could be a lot better. The only thing missing is you need to hit F12 to insert a disk/ADF image when requested to. |
22 January 2010, 22:28 | #11 | |
Tiddlypeeps
Join Date: Oct 2009
Location: Ireland
Posts: 67
|
Cheers for the help guys
Quote:
It was just the mounting the .hdf file bit and the F12 bit that tripped me up. Other than that the instructions are super I just hope I dont run inot trouble with my compact flash card, ive heard that the amiga dosent like 4gb ones, mine says its 4gb's but its actually only 3.8 so hopefully it wont be a problem. |
|
22 January 2010, 23:06 | #12 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
I was just a little blunt because I thought you may not have read them first Tiddlypeeps..
I'll add the F12 bit and look at clearing it up a little. I forget that what is straight forward to me may not be to someone using WinUAE for the first time. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Trouble installing barbarian (Psygnosis) | mjr | project.WHDLoad | 3 | 19 May 2013 15:04 |
Have trouble installing to real HD using WinUAE | NovaCoder | support.WinUAE | 3 | 08 May 2011 09:39 |
Trouble Installing WHDLoad 17 | rossb | support.Apps | 5 | 01 March 2011 17:23 |
Having trouble installing ClassicWB UAE | h4tt3n | support.WinUAE | 3 | 05 February 2010 09:38 |
trouble with installing installerNG | someamigauser | support.Apps | 0 | 18 January 2003 05:12 |
|
|