![]() |
![]() |
#1 |
Guru meditator
|
compact flash to ide - is this right?
Hey
Dyou guys recon this will work? http://cgi.ebay.co.uk/CF-to-44-pins-...QQcmdZViewItem and then ill whack a 1gb cf card in it and install wb3.1 |
![]() |
![]() |
#2 |
Zone Friend
Join Date: Feb 2006
Location: Hertfordshire
Posts: 688
|
That's what I've got in my A1200 - and it works fine.
I've got some spares. PM me your address and you can have one FOC. Better than waiting ten days from HK. |
![]() |
![]() |
#3 |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
I suggest you 44 pin female type. In this case you don't need a 44 pin cable female to female.
|
![]() |
![]() |
#4 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,630
|
@fc.studio
|
![]() |
![]() |
#5 |
Going nowhere
Join Date: Oct 2001
Location: United Kingdom
Age: 50
Posts: 9,033
|
What software is needed to get an Amiga to recognise a compact flash card as a hard drive?
And is the formatted flash card on the Amiga then compatible with plugging into a PC? |
![]() |
![]() |
#6 | |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
Quote:
2. It fits into our A1200 / A600. ![]() |
|
![]() |
![]() |
#7 |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
|
![]() |
![]() |
#8 |
Zone Friend
Join Date: Feb 2006
Location: Hertfordshire
Posts: 688
|
@ fc.studio..
I don't see any advantage in using the card you've pictured. The card in the OPs link uses the standard IDE harddrive cable. Edit: I understand that you may be suggesting that he use the card directly on the motherboard. That's ok if he has removed the RF shield, but otherwise the cable will let him fix it wherever he wants. Last edited by Magno Boots; 26 January 2008 at 23:53. |
![]() |
![]() |
#9 |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
The card I've pictured connects directly and firmly to A1200 or A600 IDE 44 PIN controller without the need of the standard IDE harddrive cable (44 pin female-female). It's only a bit harder to find.
I prefer this, but I would avoid it if you have an IDE splitter interface. Last edited by fc.studio; 27 January 2008 at 10:29. |
![]() |
![]() |
#10 |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
|
![]() |
![]() |
#11 |
AmiBay MegaMod
Join Date: Mar 2007
Location: Manchester, UK
Age: 62
Posts: 1,163
|
@ Magno Boots
You have PM Thanks Merlin |
![]() |
![]() |
#12 |
Guru Meditation Error
Join Date: Jun 2007
Location: Vancouver, Canada
Posts: 92
|
I'm tempted to buy one of these for my A600:
http://www.dealextreme.com/details.dx/sku.10310 It looks like it could be mounted to the HD cradle and connected with the original cable. Neat and tidy ![]() |
![]() |
![]() |
#13 | |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,630
|
Quote:
![]() ![]() Last edited by alexh; 27 January 2008 at 11:17. |
|
![]() |
![]() |
#14 |
Cat lover
Join Date: May 2004
Location: Italy
Age: 54
Posts: 804
|
@alexh
At the moment my A600 has one of this female CF adapter and I can assure you it works perfectly (recommended). What I like it's that it stays blocked to the standard Amiga male IDE interface. ![]() ![]() ![]() In my A1200 I have an IDE splitter with cable for the CD-RW drive, in this case the male adapter version and 2,5" cable for the compact flash hard drive is a must. However I believe that, at the moment, having a CD drive in an external enclosure (with its PSU) can be useful but it is mainly a loss of space: much better and easy to use another COMPACT flash via the PCMCIA port. ![]() |
![]() |
![]() |
#15 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,957
|
It works, I have one of them too, it is actually listed in the "manual" that comes with all these chinese cfide adapters.
|
![]() |
![]() |
#16 |
Guru meditator
|
I take it that when i get the message "Unit 0 is not a disk (type 7)" the card is not supported?
This is a lexar 256mb cf card Last edited by AliasXZ; 29 January 2008 at 17:46. |
![]() |
![]() |
#17 |
CON: artist
Join Date: Feb 2006
Location: Poland
Age: 43
Posts: 1,250
![]() |
When do you get that message? On the Amiga?
|
![]() |
![]() |
#18 |
Guru meditator
|
yeah sorry:
it sees the drive as unknown in HDToolbox, i define new drive parameters with whatever and then i can partition it. Then I exit and try to execute formatHD utility off my install disk, then it procedes to say "opening unit 0" and then the message i posted above |
![]() |
![]() |
#19 |
CON: artist
Join Date: Feb 2006
Location: Poland
Age: 43
Posts: 1,250
![]() |
Did you reboot after "Saving changes to disk"? Any new icons appear on the desktop?
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Do 40 Pin Compact Flash to IDE Adapters need power? | Peter | support.Hardware | 11 | 22 November 2011 18:57 |
Dual Compact Flash to IDE controller. | dkovacs | support.Hardware | 7 | 16 January 2011 00:20 |
Compact Flash+CDROM on A4000 IDE? | stefcep2 | support.Hardware | 13 | 21 March 2010 21:16 |
Swap 4-device buffered ide with Compact Flash | lolafg | Swapshop | 6 | 06 November 2009 10:17 |
IDE CF Compact Flash Adapter Power Plug | crazyegg | support.Hardware | 8 | 13 October 2009 01:54 |
|
|