![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2020
Location: Coulommiers/France
Posts: 94
|
HDD no booting on real Amiga 1200 but working on WinUAE w/PISTORM
Hi friends,
I need some help from specialists... To summarize, I prépared my Amiga HDD (20Go) with WinUAE following the tutorial from https://scunster.co.uk/?p=1257 and installed Classic Workbench Full for my 1200. 5 Partitions from DH0 to DH5 (PFS3 format, 3.9 Go each execpt DH0 (500Mo). Everything works well when the HDD is mount in WinUAE. Games and demos are launching, every soft works. But On my Amiga 1200, It doesn't boot straight. If I boot from Workbench 3.1 Install disk, I see the System disk (DH0) and DH1, the other disks being NDOS disks. If I replug to my PC under WinUAE, no probs. I worked a week on it, without success. If I unplug my Pistorm 32Lite, it boots well and the 5 DH are working, but I miss some softs on these disks and have no menu (The worbench menu with Icons, and son on). It says no WHDLoad installed, etc...So it starts but with nothing working. To be honest, I don't undertand anymore... What advice could you provide ? Is there any conflict with the PFS driver or scsi.device file ? Thanks for helping. Phil Config : A1200 + Pistorm32Lite + HDD 20Mo (original one) |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2009
Location: San Antonio, TX USA
Age: 50
Posts: 1,185
|
I'm still new at this but the device name should be different.
Here is a quote from website blow: https://www.retro32.com/amiga-resour...guide-tutorial "Where is says SCSI_DEVICE_NAME=scsi.device change it to SCSI_DEVICE_NAME=brcm-sdhc.device then save" Maybe that is the problem, wrong device name? |
![]() |
![]() |
#3 |
Amiga Fanatic
![]() Join Date: Feb 2004
Location: North Yorkshire, UK
Age: 46
Posts: 744
|
You would be much better off using an SD card in the SD card slot on the Raspberry Pi, than trying to use an old separate HDD presumably plugged into the A1200's IDE port? The speed difference is huge.
|
![]() |
![]() |
#4 | |
Senior Member
Join Date: Jun 2001
Location: Germany
Posts: 1,667
|
I don't fully understand, since the title seems to say something different than the text. But anyway...
So it boots in WinUAE and on the Amiga *without* the PiStorm but not with the PiStorm? Then you simply have not correctly created the 1st FAT partition needed for the PiStorm to work. Quote:
Last edited by derSammler; 19 November 2023 at 09:49. |
|
![]() |
![]() |
#5 |
Norbert
Join Date: Jan 2022
Location: Poland
Posts: 140
|
philgood1351fr.
We want to help you so write it again. A lot of information is mixed up. The emulator uses a different .device to handle the HDD (this can be changed). Pistorm with emu68 uses a different .device to support the SD card and the IDE controller in the a1200 uses yet another. Large drives above 4GB are supported by the newer scsi.device (os3.5, os3.9, os3.1.4, os3.2 and newer) |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2020
Location: Coulommiers/France
Posts: 94
|
Hi,
First of all thanks for your responses. I was first convinced that I could easily use my old 20Gb Amiga HDD with the PiStorm32 Lite. But after a week, I forgave. So, I decided to follow StevenJGore advice and disconnect my HDD. Reformated my SD, installed PiStorm partition with 3.1 Kickrom, and partitioned my SD to make 5 disks. Installed Worbench 3.1 successfully, DOPus, PFS3AIO, and all is good. Currently copying old partitions (WHDLoad Games, Demo and so on). Then, I'll need to installa PICASSO96, and few utils to complete. Thanks DerSampler and Nor Bert for your help too. Stay tuned if I encounter some more probs Thanks a million. |
![]() |
![]() |
#7 |
Norbert
Join Date: Jan 2022
Location: Poland
Posts: 140
|
With Pistorm and EMU68, you can use the ready-made SD image. CaffeineOS. There are torrents available on the net.
You can also use any kickstart you like. This is loaded on the SD card, where the files for the EMU68 emulator are located. This allows you to use a kickstart that has support for disks larger than 4GB. You can then still use the 20GB HDD as file storage. |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2020
Location: Coulommiers/France
Posts: 94
|
Success....
Everything is running right now. Thanks a lot. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga 1200 not working - No CF Booting and No Floppy activity | rabidgerry | support.Hardware | 32 | 16 August 2020 17:27 |
How do I stop winuae booting from hdd | Glen M | support.WinUAE | 2 | 13 May 2017 23:35 |
How to use real Amiga HDD under WINUAE | glue | support.WinUAE | 6 | 02 July 2010 18:00 |
'clone' virtual HDD in winuae to real Amiga HDD? | gizmomelb | support.Other | 1 | 11 December 2009 09:13 |
CF card booting in Winuae but not on real Amiga 4000 | Sandman | support.Hardware | 1 | 03 July 2008 08:19 |
|
|