Multiple harddisks don't work

I have an AmigaOS3 installation with 3 harddisks which works perfectly with WinUAE both on Window and via wine on Linux:
DH0: directory on Linux host
DH1: HDF image
DH2: HDF image

Unfortunately fs-uae only mounts the first directory based harddisk and ignores the two HDF images.

The logs don't mention any failure regarding the HDF images.

What am I doing wrong? Is such a setup supported by fs-uae at all?

[BastyCDGS]

I use FS-UAE with 4 HDF images and DH4: as directory on Linux host, too.

So yes, it works. Can you change the order for the directory harddrive to DH2: instead of DH0:? You can even do this if you boot from directory. Just set a higher boot priority to that drive.

My config looks like this:
hard_drive_0 = /path/to/dh0.hdf
hard_drive_0_file_system = /path/to/smartfilesystem
hard_drive_0_label = HD0
hard_drive_0_priority = 10
hard_drive_1 = /path/to/dh1.hdf
hard_drive_1_file_system = /path/to/smartfilesystem
hard_drive_1_label = HD1
hard_drive_1_priority = -5
hard_drive_2 = /path/to/dh2.hdf
hard_drive_2_file_system = /path/to/smartfilesystem
hard_drive_2_label = HD2
hard_drive_2_priority = -10
hard_drive_3 = /path/to/dh3.hdf
hard_drive_3_file_system = /path/to/smartfilesystem
hard_drive_3_label = HD3
hard_drive_3_priority = -15
hard_drive_4 = /path/to/directory/host
hard_drive_4_label = HOME
hard_drive_4_priority = -20

[AMIGASYSTEM]

Originally Posted by tboeckel

Unfortunately fs-uae only mounts the first directory based harddisk and ignores the two HDF images.

Check with HDToolBox that the HardFiles does not have the same volume name (name partition) and that they are bootable.

(name partition)
[ Show youtube player ]

Specifying the filesystem did the trick. Now all my drives are correctly mounted.

Is there a list of possible options which are not directly accessable by the fs-uae GUI?