30 July 2011, 22:26 | #1 |
Registered User
Join Date: Apr 2010
Location: Italy
Posts: 1,136
|
a1200 1d4 in case itx project
I have a format ITX case, a main 1d4 ver is ok, but I need an idea to enter 1230, I saw a friend who used the flat, I would do a base that turns 90 degrees
|
31 July 2011, 14:22 | #2 |
R.I.P Smudge 18-08-16
Join Date: Aug 2005
Location: Leicester/UK
Age: 66
Posts: 3,968
|
I used a flat once, and yes, 90 degrees would help. I could never enter 1230, the 3 key is missing.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A1200 rev 1D4 NTSC motherboard to PAL conversion | vasco_matias | support.Hardware | 5 | 22 September 2012 04:27 |
Wanted: a1200 motherboard rev 2b or 1d4 | Skellionz | MarketPlace | 0 | 29 June 2011 07:46 |
Mods to My A1200 1d4 Mobo. What are they ?? | cosmicfrog | support.Hardware | 19 | 09 March 2011 06:47 |
A1200 MB 1d4 Problem | Fieldday | support.Hardware | 1 | 29 May 2009 05:09 |
PC Floppy drive on a1200 1d4 mobo | _ThEcRoW | support.Hardware | 1 | 03 February 2006 16:26 |
|
|