Labyrinth of Time- Screen Shifted to Left - Part missing

Torti-the-Smurf · 19 December 2023, 18:34

Hi Folks

I tried The Labyrinth of Time

https://amiga.abime.net/games/view/t...yrinth-of-time

But the Screen is shifted too far to the left side;
and the Mousepointer can not be seen anymore, when moved to the far left side. (about 1cm of the Screen is cut off)

I did test it on Real Hardware and FPGA, always the same problem.
(in WinUAE it shows the whole Screen, because of the H&V Center Option)

Also tried the Screen Manager of MCP that has the ability to center screens.
(that works usually with Intuition/System friendly Screens)

Its better.. but still, too far to the left side, for some reason....

Any ideas or fixes ?

derSammler · 19 December 2023, 18:57

Check if there is a system-configuration file on the disk. If so, delete it.

Torti-the-Smurf · 19 December 2023, 19:11

Hi Sammler

Tried that.
Also; to launch it without a Startup-Sequence. Same result.

I guess i will try to boot from a standard Workbench floppy disk and tinkering so long with the Overscan setting,
until i get the whole screen (and centered)

That could work... *hopefully*

(and then, use this system-configuration for the game)

Torti-the-Smurf · 19 December 2023, 20:02

Nope..changing the overscan prefs on a Boot Floppy makes zero difference. (just as a test)

What a stubborn game

19 December 2023, 18:34	#1
Torti-the-Smurf Registered User Join Date: Dec 2018 Location: Earth Posts: 1,068	Labyrinth of Time- Screen Shifted to Left - Part missing Hi Folks I tried The Labyrinth of Time https://amiga.abime.net/games/view/t...yrinth-of-time But the Screen is shifted too far to the left side; and the Mousepointer can not be seen anymore, when moved to the far left side. (about 1cm of the Screen is cut off) I did test it on Real Hardware and FPGA, always the same problem. (in WinUAE it shows the whole Screen, because of the H&V Center Option) Also tried the Screen Manager of MCP that has the ability to center screens. (that works usually with Intuition/System friendly Screens) Its better.. but still, too far to the left side, for some reason.... Any ideas or fixes ? Last edited by Torti-the-Smurf; 19 December 2023 at 22:45. Reason: found a typo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help - Window is shifted to the left	Tavis	support.WinUAE	12	23 April 2022 22:45
pal screen not exactly centered, below part of screen missing	honx	support.WinUAE	5	05 September 2019 12:48
Image slightly shifted to the left	Snowwie	support.Hardware	4	21 February 2015 16:22
Left characters missing on screen in winuae 1.00	hamster	support.WinUAE	5	14 August 2005 16:36
Gfx shifted to the left problem	Leo42	support.WinUAE	6	30 January 2003 10:21

19 December 2023, 18:57	#2
derSammler Senior Member Join Date: Jun 2001 Location: Germany Posts: 1,655	Check if there is a system-configuration file on the disk. If so, delete it.

19 December 2023, 19:11	#3
Torti-the-Smurf Registered User Join Date: Dec 2018 Location: Earth Posts: 1,068	Hi Sammler Tried that. Also; to launch it without a Startup-Sequence. Same result. I guess i will try to boot from a standard Workbench floppy disk and tinkering so long with the Overscan setting, until i get the whole screen (and centered) That could work... hopefully (and then, use this system-configuration for the game)

19 December 2023, 20:02	#4
Torti-the-Smurf Registered User Join Date: Dec 2018 Location: Earth Posts: 1,068	Nope..changing the overscan prefs on a Boot Floppy makes zero difference. (just as a test) What a stubborn game

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)