Uae-configuration doesn't work with kickstart 1.3 or 2.04

[TCD]

Hi Toni,

when I try to set some values with uae-configuration inside WinUAE 1.5.0 with a Workbench 1.3 install and using kickstart 1.3 or 2.04 it has no effect. When I put the instruction (for example : 'uae-configuration cpu_speed max') in the startup-sequence I get the error 'uae-configuration failed returncode 20' (winuaebootlog.txt attached). It works fine with WinUAE 1.4.6. Does it mean that uae-configuration does not work with this configuration (WB 1.3 & kick 1.3) anymore?

[Toni Wilen]

No winuaelog.txt so i can only guess: no harddrives or any other "expansions" configured that enable "uae boot" rom.

[TCD]

Sorry, I forgot to enable logging. I have 4 directories used as harddrives in my configuration, but I can't think of any expansion. How can I enable/disable the use for uae boot rom?

[Toni Wilen]

Originally Posted by TheCyberDruid

when I try to set some values with uae-configuration inside WinUAE 1.5.0 with a Workbench 1.3 install and using kickstart 1.3 or 2.04 it has no effect.

Most important thing is misssing. DOES it work if you use same configuration but set 3.1 KS? (why guess when you can easily test it..)

[TCD]

Doesn't work with kick 3.1 either, so it must be something in my setup. Sorry to annoy you, but since it works with WinUAE 1.4.6 I thought I ask if anything obvious has changed that I missed.

[Toni Wilen]

It should work...

00F00000 64K/1 = 64K UAE Boot ROM

[Toni Wilen]

Can't duplicate, works fine on KS 1.3 booted from disk (and nonbootable hd configurated to enable boot rom)

[TCD]

Okay, like I said must be something in my setup. Thank you very much for trying to replicate my error. I will set up a new dir-HD and test if it works then. After that I will copy my stuff over and sort out what's causing the problem. Thanks again Toni!