CF IDE freezes mouse

Chris1965 · 14 April 2009, 11:06

I am puzzed why my IDE CF Adaptor is causing my mouse/A1200 to freeze with or without a CF card attached. Any ideas guys? See link: http://cgi.ebay.com.au/New-CF-To-2-5...742.m153.l1262 Perhaps I am connecting it the wrong way around?
If so will I damage the motherboard?

jolly11 · 14 April 2009, 12:42

I had the same problem..
Solution: I had this problem using an ami/st mouse, but with an original commodore amiga mouse it works fine

Amiga1992 · 14 April 2009, 21:40

I had a similar issue with my ORIGINAL mouse.
Turned out the IDE was fried.
Try with a hard drive see what happens.

Chris1965 · 14 April 2009, 22:26

I have tried new and an original Amiga mouse but still have the same problem. Also, my 40GB hard drive still works fine. Perhaps this adaptor is not compatable? If this is the case, can anyone point me to a compatable CF-IDE adaptor on ebay?

Chain · 14 April 2009, 23:15

im using couple of these adapters and never had a problem with mouse,only with drive led.
isnt there any shortage underneath?

29 April 2009, 15:00

i'm having the exact same problem as chris.
when i connect my newly bought ide adapter (with or without cf connected) in my A1200 it causes the mouse to freeze. the left and right mouse buttons still work, though..

does anybody have a clue here?

Amiga1992 · 29 April 2009, 17:51

Are you people connecting it the right way around?

01 May 2009, 18:59

everything's well connected, as far as i know. quite simply switched the hard disk with the cf adapter and connected it the same way..

bizar.

Photon · 01 May 2009, 20:20

Have you applied SetPatch for your kick/wb?

02 May 2009, 14:33

no, i haven't. never heard of it, in fact.
guess i'll give it a try..

TheCorfiot · 02 May 2009, 14:41

Just to be sure, Do either of these 2 A1200's have accelerators fitted ?

TC

02 May 2009, 18:20

nope. mine has a 4MB ramboard. but even when i disconnect the board i get the same issues.

14 April 2009, 11:06	#1
Chris1965 Registered User Join Date: Dec 2006 Location: NSW, Australia Posts: 29	CF IDE freezes mouse I am puzzed why my IDE CF Adaptor is causing my mouse/A1200 to freeze with or without a CF card attached. Any ideas guys? See link: http://cgi.ebay.com.au/New-CF-To-2-5...742.m153.l1262 Perhaps I am connecting it the wrong way around? If so will I damage the motherboard? Last edited by Chris1965; 14 April 2009 at 12:33.

29 April 2009, 15:00	#6
Spray Posts: n/a	mouse freeze i'm having the exact same problem as chris. when i connect my newly bought ide adapter (with or without cf connected) in my A1200 it causes the mouse to freeze. the left and right mouse buttons still work, though.. does anybody have a clue here?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
All Games Freezes, Please Help Me!	piemmeweb	project.WHDLoad	56	19 July 2015 14:01
Strange emulation freezes	Thom87	support.WinUAE	9	16 August 2011 23:28
Lemmings HD freezes	andy_blah	support.Games	2	02 November 2008 15:45
Warcraft 2 freezes in ShapeShifter	Flashlab	support.Apps	2	06 March 2006 22:30
The Amiga freezes	Fackamato	support.Hardware	15	15 February 2005 09:46

14 April 2009, 12:42	#2
jolly11 Registered User Join Date: Oct 2007 Location: Mars Posts: 183	I had the same problem.. Solution: I had this problem using an ami/st mouse, but with an original commodore amiga mouse it works fine

14 April 2009, 21:40	#3
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,654	I had a similar issue with my ORIGINAL mouse. Turned out the IDE was fried. Try with a hard drive see what happens.

14 April 2009, 22:26	#4
Chris1965 Registered User Join Date: Dec 2006 Location: NSW, Australia Posts: 29	I have tried new and an original Amiga mouse but still have the same problem. Also, my 40GB hard drive still works fine. Perhaps this adaptor is not compatable? If this is the case, can anyone point me to a compatable CF-IDE adaptor on ebay?

14 April 2009, 23:15	#5
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 50 Posts: 1,536	im using couple of these adapters and never had a problem with mouse,only with drive led. isnt there any shortage underneath?

29 April 2009, 17:51	#7
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,654	Are you people connecting it the right way around?

01 May 2009, 18:59	#8
Spray Posts: n/a	everything's well connected, as far as i know. quite simply switched the hard disk with the cf adapter and connected it the same way.. bizar.

01 May 2009, 20:20	#9
Photon Moderator Join Date: Nov 2004 Location: Eksjö / Sweden Posts: 5,657	Have you applied SetPatch for your kick/wb?

02 May 2009, 14:33	#10
Spray Posts: n/a	no, i haven't. never heard of it, in fact. guess i'll give it a try..

02 May 2009, 14:41	#11
TheCorfiot Amibay Senior Staff Join Date: Feb 2008 Location: Cardiff / Wales Posts: 1,302	Just to be sure, Do either of these 2 A1200's have accelerators fitted ? TC

02 May 2009, 18:20	#12
Spray Posts: n/a	nope. mine has a 4MB ramboard. but even when i disconnect the board i get the same issues.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)