31 March 2022, 17:19 | #1 |
Registered User
Join Date: Sep 2020
Location: lodz/poland
Posts: 8
|
Amiga A600 yellow screen
I have problem with my A600. After the ACA 630 Turbo card socket was lose contact with CPU when A600 working i have only yellow screen :/
My first think was "Agnus are dead" but no... i attempted run a DiagRom but dosen't start, from serial output i have "NO CHIPMEM DECTECTED, SYSTEM HALT" i swapped following chips from working one: Agnus CPU Paula Gayle U21 U22 U26 U27 RAM chps And remove U45, U56, U47 And no luck... Which chips detecting chipem apart Agnus and Gayle ? PS. I'm checked all Agnus connection, this is ok Thanks |
01 April 2022, 19:36 | #2 |
Registered User
Join Date: Sep 2020
Location: lodz/poland
Posts: 8
|
fixed thanks
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga 1200 - FPU - yellow screen | ngx | support.Hardware | 4 | 12 June 2021 17:40 |
A600 Rev2D yellow screen [RAM problem] | marmazzaa | support.Hardware | 1 | 26 January 2021 09:00 |
Amiga 2000 rev. 4.4 motherboard yellow screen | amiga2000 | support.Hardware | 11 | 27 January 2016 21:49 |
Yellow Screen Amiga 500 with +512kb | Abelardator2 | Hardware mods | 19 | 25 June 2013 21:25 |
Amiga 600 not booting... Yellow screen, and Red screen when turning PSU off | jbenam | support.Hardware | 34 | 20 March 2011 22:10 |
|
|