14 January 2022, 10:34 | #4921 | |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 302
|
Quote:
Just copy the "MMU" file that should be in the Mediator folder and rename the "Copy of MMU" file to PPCPCI and then edit it to ensure it states "Yes". Also the MMU file has to be edited and set to "Yes" if it is not already for the 1200 to sort of work. @Fitzsteve and me had different results on our 1200 setups. Fitzy seems to be able to get his to run more stable, mine crashes with most but I was able to get the warp3D gears Demo to run the only difference with my setup was mine had the Killer M1 and Fitzy’s has the Killer K1 like yours. I even tried a clone of his OS but I still had the same issues I can’t remember if I tried the latest version but I’m sure 17.13 allows me to initialise the PPC on the 1200 Hope this helps Last edited by Timtheloon; 14 January 2022 at 12:06. |
|
14 January 2022, 10:54 | #4922 | |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 302
|
Sonnet 7200 PCI programming
Quote:
Got to say @Hedeon was shocked to read that you have been running this project for 7 years that's amazing Last edited by Timtheloon; 14 January 2022 at 12:12. |
|
14 January 2022, 14:17 | #4923 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,002
|
If it is a question of adding the autoconfig numbers, then they will be added to 17.13b. As 17.14 has no A1200 support left in it.
Elbox should add a 32 bit bridge to their A1200 mediators. |
14 January 2022, 14:24 | #4924 | |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,002
|
Quote:
Shame not many people picked up development of stuff for it. The last month there were like 100+ G4 cards available on eBay for 100 dollars a piece. And the carrier cards could be made by the community. My thanks to the people who ported stuff, you know who you are. And all the people who motivated me to keep going. |
|
14 January 2022, 15:00 | #4925 |
Registered User
Join Date: Dec 2017
Location: Portsmouth / United Kingdom
Posts: 302
|
Sadly I'm just a USER but I think development will slowly increase its just a shame that the compatible cards have become so expensive.
but you have given the Amiga Community the opportunity to experience a PPC PCI based Amiga which is more than Elbox did |
14 January 2022, 17:05 | #4926 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,406
|
For what it's worth, I hope to restart my PCIPPC endeavors soon. I have the AA3000+ lying here now for a few months and an Apocalypse card (128MB).
|
14 January 2022, 19:33 | #4927 | |
Banned
Join Date: Feb 2019
Location: United Kingdom
Posts: 404
|
Quote:
|
|
14 January 2022, 19:42 | #4928 | |
Banned
Join Date: Feb 2019
Location: United Kingdom
Posts: 404
|
Quote:
|
|
15 January 2022, 03:43 | #4929 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,912
|
Only 178 Apocalypse cards left at the gargantuan price of $179.
https://www.ebay.com/itm/184255849620 |
15 January 2022, 07:36 | #4930 |
Registered User
Join Date: Oct 2017
Location: NRW/ Germany
Posts: 21
|
Is there chance on any progress to get FusionPPC running? Otherwise, could an Linux distribution utilize the PCIPPC?
Anyway, thanks for Your Great work. The Hardware / software environment is very nice to have. Best regards, dayowalker |
15 January 2022, 08:57 | #4931 | |
Registered User
Join Date: May 2018
Location: Germany, Baden-Wuerttemberg
Posts: 387
|
Quote:
|
|
15 January 2022, 14:43 | #4932 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,406
|
These are 128 MB version what I can tell right (which I already have)?
I know you can mod them to 256 MB, but that's out of my skills league |
15 January 2022, 15:56 | #4933 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,912
|
In theory yes. Playing with PPCBug it seemed to be able to see the other PCI devices on the bus. In theory if you can find a kernel and a bootloader and place them on a PCI SCSI controller it *should boot. However it didn't seem to find any of the SCSI devices when I was playing around with it.
Though keep in mind you'll only be able to see devices on the PCI bus so for a typical 4 slot Mediator all you are going to get is PPC, SCSI or IDE of some kind, Video and perhaps USB (since you need some input method). Maybe you could use the onboard flash as storage, all 64MB of it. Or maybe you could use USB storage. Last edited by grelbfarlk; 15 January 2022 at 22:28. |
18 January 2022, 19:36 | #4934 |
Banned
Join Date: Feb 2019
Location: United Kingdom
Posts: 404
|
As promised here is my showconfig output:
4.OS39:> showconfig PROCESSOR: CPU 68060/68060fpu/68060mmu CUSTOM CHIPS: AA PAL Alice (id=$0023), AA Lisa (id=$00F8) VERS: Kickstart version 46.143, Exec version 46.45, Disk version 45.5 RAM: Node type $A, Attributes $5 (FAST), at $70000000-$7FF7FFFF (255.5 meg) Node type $A, Attributes $2005 (FAST), at $48000000-$4FFFFFFF (128.0 meg) Node type $A, Attributes $703 (CHIP), at $4000-$1FFFFF (~2.0 meg) BOARDS: Board + ROM (HD?) (phase 5): Prod=8512/17($2140/$11) (@$EA0000 128K) Board (Index Information Ltd): Prod=2206/40($89E/$28) (@$EC0000 128K) Board (Index Information Ltd): Prod=2206/168($89E/$A8) (@$200000 4meg) Tried the PPCPCI file and still the same issue about no PCI bridge here is a copy of my pciinfo output Pci Device 1: VendorID: $121a VendorName: 3Dfx Interactive, Inc. DeviceID: $9 DeviceName: Voodoo 4 / Voodoo 5 ClassCode: $30000 RevisionID: $1 InterruptPin: 1 SubsystemVendorID: $121a SubsystemID: $5 MemSpace0: $30000000 - $37ffffff MemSpace1: $38000000 - $3fffffff IOSpace2: $ed6000 - $ed60ff RomSpace: $40000000 - $4000ffff Pci Device 2: VendorID: $1033 VendorName: NEC Corporation DeviceID: $35 DeviceName: OHCI USB Controller ClassCode: $c0310 RevisionID: $43 InterruptPin: 2 SubsystemVendorID: $1033 SubsystemID: $35 MemSpace0: $40100000 - $40100fff Pci Device 3: VendorID: $1033 VendorName: NEC Corporation DeviceID: $35 DeviceName: OHCI USB Controller ClassCode: $c0310 RevisionID: $43 InterruptPin: 3 SubsystemVendorID: $1033 SubsystemID: $35 MemSpace0: $40200000 - $40200fff Pci Device 4: VendorID: $1033 VendorName: NEC Corporation DeviceID: $e0 DeviceName: uPD72010x USB 2.0 Controller ClassCode: $c0320 RevisionID: $4 InterruptPin: 4 SubsystemVendorID: $ee4 SubsystemID: $89e MemSpace0: $40300000 - $403000ff Pci Device 5: VendorID: $1274 VendorName: Ensoniq DeviceID: $5880 DeviceName: 5880B / Creative Labs CT5880 ClassCode: $40100 RevisionID: $4 InterruptPin: 3 SubsystemVendorID: $1274 SubsystemID: $8001 IOSpace0: $ed6100 - $ed613f Pci Device 6: VendorID: $1957 VendorName: Freescale Semiconductor Inc DeviceID: $86 DeviceName: MPC8343E ClassCode: $60000 RevisionID: $11 InterruptPin: 4 SubsystemVendorID: $1a56 SubsystemID: $201 MemSpace0: $40400000 - $404fffff Pci Device 7: VendorID: $1002 VendorName: Advanced Micro Devices, Inc. [AMD/ATI] DeviceID: $5960 DeviceName: RV280 [Radeon 9200 PRO] ClassCode: $30000 RevisionID: $1 InterruptPin: 1 SubsystemVendorID: $174b SubsystemID: $250 MemSpace0: $48000000 - $4fffffff IOSpace1: $ed6200 - $ed62ff MemSpace2: $40500000 - $4050ffff RomSpace: $40600000 - $4061ffff Pci Device 8: VendorID: $10ec VendorName: Realtek Semiconductor Co., Ltd. DeviceID: $8139 DeviceName: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter ClassCode: $20000 RevisionID: $10 InterruptPin: 2 SubsystemVendorID: $10ec SubsystemID: $8139 IOSpace0: $ed6300 - $ed63ff MemSpace1: $40700000 - $407000ff RomSpace: $40800000 - $4081ffff Last edited by Jpor; 18 January 2022 at 19:42. |
18 January 2022, 20:19 | #4935 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,002
|
Mediator SX was never supported. That's what those number say you have. Not a TX.
|
18 January 2022, 20:44 | #4936 |
Banned
Join Date: Feb 2019
Location: United Kingdom
Posts: 404
|
|
18 January 2022, 20:46 | #4937 | |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,002
|
Quote:
|
|
18 January 2022, 21:12 | #4938 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,002
|
|
18 January 2022, 21:16 | #4939 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,002
|
Oh and if you have a TX then your jumper should be on 8MB, not 4MB.
|
18 January 2022, 21:42 | #4940 |
Registered User
Join Date: Sep 2015
Location: London, UK
Posts: 414
|
I didn't think the TX was supported either? In fact, no A1200 Mediator is supported?
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WANTED: PCI Sound Card VORTEX2 SuperQuard / SQ2500 or Turtlebeach SantaCruz pci card | keropi | MarketPlace | 12 | 15 March 2017 02:48 |
Wanted:Sonnet Technologies QuadDoubler 50 (Doubler 4000) | kronuz | MarketPlace | 0 | 16 June 2013 00:29 |
eBay : Sonnet Quaddoubler | alexh | MarketPlace | 3 | 07 May 2013 00:50 |
Overlay problem on GeForce 7200 | Leandro Jardim | support.WinUAE | 1 | 10 August 2010 15:50 |
Prometheus PCI & Voodoo 3 PCI GFX Card | Slayer | support.Hardware | 21 | 05 September 2006 10:57 |
|
|