Mini AMP for cd player in A600?

Smiley · 31 January 2007, 17:49

Well hopefully soon I will get that cdrom sorted in my A600 and also get that sram card for it.

Anyway my original plan for it was to have some sort of integrated speakers for the A600. I soon realised this would not be possible without an amplifier.

Basically at the moment I have 2 audio outputs.

cdrom > RCA connectors
amiga > RCA connectors

These can be merged with a rca splitter cable.

Would it be possible to use a mini amp PCB to get better sounds through mini speakers?

Something like:

These mini amp pcbs are about 8 quid. I think it would be quite easy to hook one up for the cdrom but not the amiga unless it was external (which I wouldnt want).

Any ideas? I know its a bit pointless but I want the A600 to play audio cds at an acceptable level just for the craic.

Secret Vampire · 31 January 2007, 20:41

You shouldn't really use a splitter cable to mix the outputs, there's a simple mixer circuit to do it on aminet. As far as getting the A600 audio into the amp, it should be possible to desolder the centre pin of the jacks from the board, run one wire from the board to the amp, and then another back from the amp to the centre pin.

Smiley · 31 January 2007, 22:11

thanks !

31 January 2007, 17:49	#1
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,350	Mini AMP for cd player in A600? Well hopefully soon I will get that cdrom sorted in my A600 and also get that sram card for it. Anyway my original plan for it was to have some sort of integrated speakers for the A600. I soon realised this would not be possible without an amplifier. Basically at the moment I have 2 audio outputs. cdrom > RCA connectors amiga > RCA connectors These can be merged with a rca splitter cable. Would it be possible to use a mini amp PCB to get better sounds through mini speakers? Something like: These mini amp pcbs are about 8 quid. I think it would be quite easy to hook one up for the cdrom but not the amiga unless it was external (which I wouldnt want). Any ideas? I know its a bit pointless but I want the A600 to play audio cds at an acceptable level just for the craic.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rare game & mini mag	NPI	request.Old Rare Games	14	13 June 2013 23:05
Moovid AVI & QT player	Egg Shen	request.Apps	6	22 December 2008 20:10
Apod 1 & 2 (pc player with amiga modules)	sarek2k	Nostalgia & memories	8	30 December 2006 04:06
AMP Player	@UAE	support.WinUAE	4	29 April 2002 21:29
Anyone have one of these? (Laserdisc player & DVD)	Malc	Retrogaming General Discussion	30	22 February 2002 10:42

31 January 2007, 20:41	#2
Secret Vampire Registered User Join Date: Jul 2006 Location: Birmingham UK Age: 43 Posts: 214	You shouldn't really use a splitter cable to mix the outputs, there's a simple mixer circuit to do it on aminet. As far as getting the A600 audio into the amp, it should be possible to desolder the centre pin of the jacks from the board, run one wire from the board to the amp, and then another back from the amp to the centre pin.

31 January 2007, 22:11	#3
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,350	thanks !

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)