Amiga SVideo Adapters A500 / A600 / A1000 / A1200 / A4000 - Page 7

digit01 · 05 April 2008, 06:41

Sweet thanks for keeping on this! I can't wait to get one.

Flashlab · 24 April 2008, 20:43

How is the project going along?

Flashlab · 04 May 2008, 15:16

I hope this project isn't dead?

Angus · 03 June 2008, 13:57

Quote:

Originally Posted by Flashlab

I hope this project isn't dead?

I'm with Flashlab on this.

Zetro, any chance of an update on the project if its still ongoing?

Cheers.

Zetr0 · 03 June 2008, 14:10

Yeps some nice update infact.

as you all know i have had trouble fabbing the board at home, I would like to blame some dodgy copper boards i got from ebay. Also doing dual sided at home takes sooooo much time. SO

I have now got 10 PCB's being manufactured at www.futurlec.com

should be here in a couple of weeks. once built and tested i will ship them out in the first order basis, and then get some more in

I was hoping to keep this quite until the boards arrived but you guys rumbled me.... grrr

Angus · 03 June 2008, 16:01

Quote:

Originally Posted by Zetr0

I was hoping to keep this quite until the boards arrived but you guys rumbled me.... grrr

Sorry about that, put it down to youthful (cough) enthusiasm.

EmuChicken · 10 June 2008, 14:08

... ... ... keep on it! - please! :-)

Zetr0 · 10 June 2008, 18:31

indeed, I had my orer confirmation today and payment has gone out for the first 10 boards...

expect hardware pron soon ;D

Hungry Horace · 10 June 2008, 19:11

curse being in the second ten! by the time it reaches me i'll be wanting two!

NovaCoder · 13 June 2008, 01:41

I'm still after one of these babies Zetr0

musojon74 · 17 June 2008, 14:06

<excited>Woohoo! I look forwards to this adapter!

</excited> Let me know when I need to pay!

Cheers Zetr0!

Jon

mrodfr · 17 June 2008, 19:23

hello,

ye, I'm on the first batch ;-)

contact me/us when things moving on, ZetrO, thanks.

see the link for the list (post #40) on this thread:

http://eab.abime.net/showpost.php?p=374946&postcount=40

Zetr0 · 17 June 2008, 19:32

@mrodfr

fear not my friend, you will be getting one of the first 5, then i will get some more AD724's and sort out the next 5... and so on.... and so on.... etc....

EmuChicken · 18 June 2008, 00:19

is this turning into a "just 2 more weeks" ?

Zetr0 · 18 June 2008, 02:36

@EmuChicken

I hope not money went out today and the all clear from Futurlec, the main reason its been so long (other than wife/child/UNI/Work), I had to find £450 for the Washer Dryer earlier in the year kinda puts a crimp on ones disposable cash, Oh and then theres the fact imma a cheap skate, so i have to do it in batches...

also I wont take money unless there is an item to shift

simple as really... so on my meager pocket money the wife gives me I am afraid to say LOL

sorry for the delay.... but unlike A(_._)ST.inc there is a product at the end of the day...

boing_1000 · 18 June 2008, 06:50

Zetro I forgot you were making this fine piece of hardware! I think it would be perfect for fixing up my ziggy miggy

08 July 2008, 17:59

@Zetr0

I'd love a PAL Narmi Internal Basic kit!

Cheers!

09 July 2008, 23:49

Hello Zetr0!

I'm interested in an "Narmi External Deluxe" PAL kit, and also anynew internal easy-install kits.

Cheers for your efforts!!!

Zetr0 · 15 July 2008, 13:47

Okay, today I received a little box of heaven....

oh yes... ITS PEANUT BUTTER F*CKING JELLY TIME!!!

(click to enlarge) :Caution HUGE IMAGE

(click to enlarge) :Caution HUGE IMAGE

sorry for the delay, today is a HUGE step closer!

LOL i haven't been able to stop playing with the boards!!!! LOL

the look awesome!! A HUGE thank you to Bee and Alan at www.Futurlec.com a great service!

the board here is dual layer / has the FULL Solder mask and Silking... cost approximately £4.50 each inc delivery

Okay... anyone else here as excited as me?!

Narmi, I know your out there

THANK YOU

Zetr0 · 15 July 2008, 13:52

The above board revision also allows for a 5 volt regulator, this allows it to be also compatible with the Atari ST

15 July 2008, 13:47	#139
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	Major Update!! Okay, today I received a little box of heaven.... oh yes... *ITS PEANUT BUTTER FCKING JELLY TIME!!! (click to enlarge) :Caution HUGE IMAGE (click to enlarge) :Caution HUGE IMAGE (click to enlarge) :Caution HUGE IMAGE sorry for the delay, today is a HUGE step closer! LOL i haven't been able to stop playing with the boards!!!! LOL the look awesome!! A HUGE thank you to Bee and Alan at www.Futurlec.com a great service! the board here is dual layer / has the FULL Solder mask and Silking... cost approximately £4.50 each inc delivery Okay... anyone else here as excited as me?! Narmi, I know your out there THANK YOU**

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A1200, A600, A500+ and A500	maddoc666	MarketPlace	1	22 May 2011 09:11
A500 or A600 or A1200?	emuola	New to Emulation or Amiga scene	58	23 April 2009 23:43
Cheap A1200/A600 internal 44-pin CF adapters	alexh	MarketPlace	7	01 September 2008 23:15
A nice A1000 SVideo mod [Video].	ppill	Hardware mods	18	01 September 2007 18:06
A1000, A500, A1200, monitors and more..	emser	MarketPlace	0	12 February 2004 20:14

05 April 2008, 06:41	#121
digit01 Registered User Join Date: Oct 2007 Location: NC Posts: 20	Sweet thanks for keeping on this! I can't wait to get one.

24 April 2008, 20:43	#122
Flashlab Registered User Join Date: Sep 2005 Location: Netherlands Posts: 158	How is the project going along?

04 May 2008, 15:16	#123
Flashlab Registered User Join Date: Sep 2005 Location: Netherlands Posts: 158	I hope this project isn't dead?

03 June 2008, 14:10	#125
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	Yeps some nice update infact. as you all know i have had trouble fabbing the board at home, I would like to blame some dodgy copper boards i got from ebay. Also doing dual sided at home takes sooooo much time. SO I have now got 10 PCB's being manufactured at www.futurlec.com should be here in a couple of weeks. once built and tested i will ship them out in the first order basis, and then get some more in I was hoping to keep this quite until the boards arrived but you guys rumbled me.... grrr

10 June 2008, 14:08	#127
EmuChicken Senior Member Join Date: Jul 2004 Location: Nagoya, Japan (moved!) Age: 41 Posts: 746	... ... ... keep on it! - please! :-)

10 June 2008, 18:31	#128
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	indeed, I had my orer confirmation today and payment has gone out for the first 10 boards... expect hardware pron soon ;D

10 June 2008, 19:11	#129
Hungry Horace Wipe-Out Enthusiast Join Date: Nov 2005 Location: . Age: 43 Posts: 2,538	curse being in the second ten! by the time it reaches me i'll be wanting two!

13 June 2008, 01:41	#130
NovaCoder Registered User Join Date: Sep 2007 Location: Melbourne/Australia Posts: 4,400	I'm still after one of these babies Zetr0

17 June 2008, 14:06	#131
musojon74 Registered User Join Date: Dec 2007 Location: The World Age: 50 Posts: 476	<excited>Woohoo! I look forwards to this adapter! </excited> Let me know when I need to pay! Cheers Zetr0! Jon

17 June 2008, 19:23	#132
mrodfr Registered User Join Date: Jan 2005 Location: 62-France Age: 56 Posts: 413	hello, ye, I'm on the first batch ;-) contact me/us when things moving on, ZetrO, thanks. see the link for the list (post #40) on this thread: http://eab.abime.net/showpost.php?p=374946&postcount=40

17 June 2008, 19:32	#133
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	@mrodfr fear not my friend, you will be getting one of the first 5, then i will get some more AD724's and sort out the next 5... and so on.... and so on.... etc....

18 June 2008, 00:19	#134
EmuChicken Senior Member Join Date: Jul 2004 Location: Nagoya, Japan (moved!) Age: 41 Posts: 746	is this turning into a "just 2 more weeks" ?

18 June 2008, 02:36	#135
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	@EmuChicken I hope not money went out today and the all clear from Futurlec, the main reason its been so long (other than wife/child/UNI/Work), I had to find £450 for the Washer Dryer earlier in the year kinda puts a crimp on ones disposable cash, Oh and then theres the fact imma a cheap skate, so i have to do it in batches... also I wont take money unless there is an item to shift simple as really... so on my meager pocket money the wife gives me I am afraid to say LOL sorry for the delay.... but unlike A(_._)ST.inc there is a product at the end of the day...

18 June 2008, 06:50	#136
boing_1000 A1000 Addict Join Date: Jan 2006 Location: Eastern USA Age: 37 Posts: 567	Zetro I forgot you were making this fine piece of hardware! I think it would be perfect for fixing up my ziggy miggy

08 July 2008, 17:59	#137
prophet36 Posts: n/a	@Zetr0 I'd love a PAL Narmi Internal Basic kit! Cheers!

09 July 2008, 23:49	#138
thewool Posts: n/a	Hello Zetr0! I'm interested in an "Narmi External Deluxe" PAL kit, and also anynew internal easy-install kits. Cheers for your efforts!!!

15 July 2008, 13:52	#140
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 49 Posts: 9,768	The above board revision also allows for a 5 volt regulator, this allows it to be also compatible with the Atari ST

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)