![]() |
![]() |
#1 |
Zone Friend
Join Date: Sep 2006
Location: Bathurst Australia
Posts: 281
|
Burning DVDs on a real Amiga - Which s/w and drive to use
Been doing some research on EAB but haven't been able to find the right answer so far.
I am using a *real 1200* with CF card which has ClassicWB installed etc etc.... As times have moved on from years ago whereby I used a SCSI CD burner to back-up my drive and the like, I have not been able to find a compromise between available amiga s/w and current DVD burners on the market today. I understand that I could remove the CF card and use WinUAE to back it up etc... but I am looking for a solution which will negate the need for having to do this. My questions are: 1. - Does Make CD support today's DVD burners..? and if so, which? I have tried 3 separate units without any luck! Note: tried with CD's as opposed to DVD discs. 2. - ...or is it best to use Burn It ? Either one does not seem to do the job. 3. - Am I best off in investing in an old CD burner to do the job? All feedback is appreciated. Thanks |
![]() |
![]() |
#2 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,955
|
Fryingpan?
|
![]() |
![]() |
#3 |
Zone Friend
Join Date: Sep 2006
Location: Bathurst Australia
Posts: 281
|
Tried that but couldn't get it to recognise the drives. As such, how could I register the product if it doesn't do what I need?
From what I remember, it's a bit of a catch 22.... maybe not. However I could not get it to do s**t ! maybe I must try again. Do you know if it "works/supports" all current DVD burners or if it has its limitations? :0 |
![]() |
![]() |
#4 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,955
|
Should work. When unregistered, it is "read only" so if it won't work for you in unregistered mode, then bad luck.
Get a master/slave CF adapter and plug another card in the slave slot.. Then use QB or Diavolo or whatever to back it up to the second card. :-) |
![]() |
![]() |
#5 |
Zone Friend
Join Date: Sep 2006
Location: Bathurst Australia
Posts: 281
|
.......bad luck ain't good enough !!!
Ok then, if it is; then it really sucks !! |
![]() |
![]() |
#6 |
(Amigas && Amigos)++
Join Date: Sep 2005
Location: Anrea
Posts: 999
|
MakeCD should support most ATAPI IDE burners afaik. From memory, I could write CDs using a LiteOn DVD burner connected to a SCSI-IDE bridge.
Couldn't get FryingPan to work properly as that version was buggy or it might have been my SCSI-IDE bridge, the latest one somewhere may work. Most modern drive should work with MakeCD with the SCSI3_ATAPI driver, as long as you have a later version, e.g. MakeCD 3.2d I think was the last. http://www.estamos.de/makecd/auto/Co...ty_3.html#SEC3 MakeCD is organised differently to most modern burning programs, but as you have used it before, I assume you know how it works. |
![]() |
![]() |
#7 |
I hate potatos and shirts
|
Also look in Aminet. I'm pretty sure someone as uploaded a DVD driver for 68k machines, so you will be able to burn 4.7Gb of data at once.
|
![]() |
![]() |
#8 |
Zone Friend
Join Date: Sep 2006
Location: Bathurst Australia
Posts: 281
|
@Calgor
Many thanks for the information and extra incentive... I was just aboiut to give up until I read your reply. I borrowed a DVD drive off a spare PC I have and to my surprise it all works as expected with Make CD. However this is only applicable to CDs as opposed to DVDs. Is it possible to burn DVDs under MakeCD? ![]() |
![]() |
![]() |
#9 |
(Amigas && Amigos)++
Join Date: Sep 2005
Location: Anrea
Posts: 999
|
No MakeCD cannot it is too old, you should use FryingPan. Last version I know of is 1.3.2 which is a year old, don't know what's going on. There may be one other application but not sure. (Incidentally On OS4.x there is also AmiDVD. On MorphOs there is BurnIt!3. Shame efforts are all split else we might have had an open source superDVD program)
|
![]() |
![]() |
#10 |
I hate potatos and shirts
|
MakeCD is not "tooltype-aware"?
![]() Nor "device-aware"? Last edited by rkauer; 18 March 2009 at 19:07. |
![]() |
![]() |
#11 |
(Amigas && Amigos)++
Join Date: Sep 2005
Location: Anrea
Posts: 999
|
@rkauer
Have you burned DVDs some other way other than FryingPan? Would be interested to know an alternative. Not aware of MakeCD burning DVDs, are you saying it may be able to by changing some config? |
![]() |
![]() |
#12 |
Zone Friend
Join Date: Sep 2006
Location: Bathurst Australia
Posts: 281
|
@Calgor
It would "appear" that burning DVD's with MakeCD "may" just be possible..... I inserted a DVD instead of a CD, selected several tracks to be burnt which are different partitions within the CF card which total in excess of a normal DC's ~700 Meg size and so far, the burning process seems to be working.... ![]() Will update you/everyone when all is done. Lets hope it works. @rkauer... Thanks for the tip, if that's what you meant, ![]() |
![]() |
![]() |
#13 |
Zone Friend
Join Date: Sep 2006
Location: Bathurst Australia
Posts: 281
|
Update...
Much to my amazement..... I am absolutely amazed that I am amazed at the fact that it is amazing that MakeCd CAN burn DVD's...
![]() No parameters were changed during the burning process other than "ignoring" any MakeCD requesters. I clicked "ignore" throughout the process and I now have a complete 1.2 Gig DVD with all my recently installed stuff !!! ![]() ![]() ![]() |
![]() |
![]() |
#14 |
Zone Friend
Join Date: Sep 2006
Location: Bathurst Australia
Posts: 281
|
OK people... Enough of the amazing stuff (although it is amazing - as far as I can tell !!) Did/Does/is anyone else on this board aware of the fact that this IS actually possible?
I realise it isn't a massive breakthrough but it seems that no one was "actually" aware not the fact...except we know who? ![]() |
![]() |
![]() |
#15 |
The 1 who ribbits
|
well I`m amazed too, good work dc33, might even consider givin the amiga a dvd writer now
|
![]() |
![]() |
#16 |
(Amigas && Amigos)++
Join Date: Sep 2005
Location: Anrea
Posts: 999
|
I am gob-smacked.... wow... obviously rkauer had some idea. I did not know of this. Surely someone will now point to some forum somewhere to show DC33 was not the first to publicly proclaim.
This thread suggests that even some knowledgable ppl were not aware it is possible: http://amigans.net/modules/news/article.php?storyid=134 Can your DVD be read on a "PC"? |
![]() |
![]() |
#17 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,955
|
Probably? The only thing to consider when burning DVDs for Amiga use is, you must use the ISO9660 filesystem. Most PC software default to UDF, which afaik is not supported by the classic Amiga cd handlers
|
![]() |
![]() |
#18 |
Zone Friend
Join Date: Sep 2006
Location: Bathurst Australia
Posts: 281
|
Unfortunately not, however this is not my aim at the moment, but might just give it a go. I have all my amiga stuff on CDs/DVDs already and all I wanted to achieve was to do a "backup" of my current configuration so that it doesn't take me forever to gwt the system up and running should it crash.... Although it would be nice to be able to read it on a PC for WinUAE for example. Will give it a try later and let everyone know.
Thanks for pointing this out Jope. I cannot recall using this setting so I must try it and see what results I get. |
![]() |
![]() |
#19 |
I hate potatos and shirts
|
That's the beauty of Amiga OS: you simply update a "driver" (device or datatype) and even programs made 20 years ago will run with the new file type/hardware flawlessly!
![]() Lovely computer! |
![]() |
![]() |
#20 |
Registered User
Join Date: Aug 2007
Location: UK
Posts: 446
|
ISO9660 is standard accross many platforms as is one or the one cd and dvd base specification. It will be the chr$ that may stop some files or directorys not showing, if wrong for windows os < or > etc for example. Where as on the amiga they are ok to use in filenames.
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
SCSI DVD-Ram Drive and DVDs | Info-Seeker | support.Hardware | 6 | 04 May 2017 17:17 |
Real Hard Drive Read Only ?!?! | Nobby_UK | support.WinUAE | 2 | 05 August 2013 16:50 |
Burning files for Amiga A570 CD-Rom drive | tonyk | support.Hardware | 10 | 04 February 2008 12:44 |
List of Amiga Demo DVDs | AGN | project.Amiga Demo DVD | 8 | 29 January 2007 17:47 |
Hard drive install real amiga & winuae, please help | magnox | support.Hardware | 3 | 28 February 2006 22:35 |
|
|