Moving HD from A1200 to A600

Djay · 26 February 2003, 21:14

i have an internal HD connected to my A1200 with OS3.0 installed, can i take this out and put it in my A600 boot into floppy workbench, format drive and then install OS2.0?

as anyone got a step by step guide of what to do

PLEASE

Severin · 26 February 2003, 23:39

yep

open both miggies, lift out the HD (with the cable and caddy) put it into the 600, plug in the cable, close both miggies

fairly simple...

But why bother with OS2 I though A600's had OS3 roms?

26 February 2003, 23:45

Uh no

Echo · 26 February 2003, 23:46

I'd try and force it to run with OS3, lol

You never know...

Edit:
p.s. rather miffed at the mo. Moved two partitions with HDToolbox, just slid them along to fill a gap. I was not warned that this operation would destroy partitions. I was greeted with 2 NDOS disks on reboot. Thankfully it was all backed up on two zip disks a couple of days ago...

Djay · 26 February 2003, 23:59

well its only a 85hd, getting the A600 in next two days, does anyone know what ks version it WILL BE... and what wb should i get?

Amiga1992 · 27 February 2003, 00:40

Quote:

Originally posted by Echo
I'd try and force it to run with OS3, lol

It wont work, but you can softkick the A600 with KS3.0 and run OS3

HOwever you will need quite some RAM. You are much better using OS2.1, it's fab

Djay · 27 February 2003, 01:11

@akira.. which edition should i use eg.. 38.35 or 38.56 and in TOSEC what does [m] mean and... hehe... should i use international disk set or standard boot set (with UK A600)

woody57 · 27 February 2003, 01:46

Having tested 2.04 / 2.05 & 2.1 on my 1meg { 2mb total seems small but it aint ! } A600 project its got to be 2.1 as all apps and disk games I tested ran smoothest { even the 4 disk misery SF2 ! } best of luck with the drive , my original was a factory fitted 60mb so I didn,t have to Hd Install { only damn disk I,m missing from three what i thought were complete sets }

Djay · 27 February 2003, 02:14

i've never actually owned an A600, so forgive me if this is a stupid question, but how much ram comes in a bog-standard A600, and what memory do i need to boost it up...

in TOSEC i see two different versions of Workbench 2.1

38.35 (international)

and

38.36

what is the version that would have been packed with an english A600?

what does [m] mean at the end of the filename, is it multi-language?

what is correct procedure for installing the HD in the A600

i.e. should i...
take out HD from A1200, insert into A600
boot using Workbench (boot disk)
format drive using the format in HD tools or whatever...
...wait...
then reset machine and insert the install disk

thanks for the answers to my stupid questions, i'm a workbench virgin...

27 February 2003, 02:23

ram :1mb
ks version: dunno I've got 2 a600s and all I needed to know was that they were 2.x

I wouldn't use 3.x with an a600 anyway. 2.x is just what you need on an a600

Severin · 27 February 2003, 13:39

Quote:

Originally posted by Severin
But why bother with OS2 I though A600's had OS3 roms?

Oops, sorry

I've only ever seen a couple of 600's and they both had 3.1 roms in them, must have been user upgrades...

Amiga1992 · 27 February 2003, 18:10

Quote:

Originally posted by Djay
what is the version that would have been packed with an english A600?

NOne. Workbench 2.1 was only boughth as an upgrade, it was never bundled with amy machines.

Quote:

what is correct procedure for installing the HD in the A600
i.e. should i...
take out HD from A1200, insert into A600
boot using Workbench (boot disk)
format drive using the format in HD tools or whatever...
...wait...
then reset machine and insert the install disk

NOpe.
Take it off your 1200, put it in the 600.

Boot with the INSTALL DISK, and use the script in there.
After all is done you reset and boot from teh HD.

Djay · 27 February 2003, 23:50

thanks for the info!!!

26 February 2003, 21:14	#1
Djay 95th User Join Date: May 2001 Location: Brighton/UK Age: 48 Posts: 3,120	Moving HD from A1200 to A600 i have an internal HD connected to my A1200 with OS3.0 installed, can i take this out and put it in my A600 boot into floppy workbench, format drive and then install OS2.0? as anyone got a step by step guide of what to do PLEASE

27 February 2003, 01:46	#8
woody57 Registered User Join Date: Dec 2002 Location: Manchester Posts: 801	2.1 just the ticket Having tested 2.04 / 2.05 & 2.1 on my 1meg { 2mb total seems small but it aint ! } A600 project its got to be 2.1 as all apps and disk games I tested ran smoothest { even the 4 disk misery SF2 ! } best of luck with the drive , my original was a factory fitted 60mb so I didn,t have to Hd Install { only damn disk I,m missing from three what i thought were complete sets }

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A600 for A1200?	SteveSJB	Swapshop	0	19 January 2011 22:01
Moving Files Etc	Washac	support.Hardware	1	09 February 2010 16:50
Wanted: The moving retainer of the A1200 keyboard connector...	keropi	MarketPlace	6	17 July 2006 19:09
moving OS3.9 to different HD	lopos2000	support.Apps	2	09 August 2005 12:56
It's moving..it's alive, it's moving.. IT'S ALLIIIIIIIIIIVE!!!!!!!!!1	alkis21	Retrogaming General Discussion	23	22 August 2002 10:51

26 February 2003, 23:39	#2
Severin Registered User Join Date: Dec 2002 Location: Gloucester / UK Posts: 700	yep open both miggies, lift out the HD (with the cable and caddy) put it into the 600, plug in the cable, close both miggies fairly simple... But why bother with OS2 I though A600's had OS3 roms?

26 February 2003, 23:46	#4
Echo Registered User Join Date: Jan 2003 Location: South-West Wales Posts: 382	I'd try and force it to run with OS3, lol You never know... Edit: p.s. rather miffed at the mo. Moved two partitions with HDToolbox, just slid them along to fill a gap. I was not warned that this operation would destroy partitions. I was greeted with 2 NDOS disks on reboot. Thankfully it was all backed up on two zip disks a couple of days ago...

26 February 2003, 23:59	#5
Djay 95th User Join Date: May 2001 Location: Brighton/UK Age: 48 Posts: 3,120	well its only a 85hd, getting the A600 in next two days, does anyone know what ks version it WILL BE... and what wb should i get?

27 February 2003, 01:11	#7
Djay 95th User Join Date: May 2001 Location: Brighton/UK Age: 48 Posts: 3,120	@akira.. which edition should i use eg.. 38.35 or 38.56 and in TOSEC what does [m] mean and... hehe... should i use international disk set or standard boot set (with UK A600)

27 February 2003, 02:14	#9
Djay 95th User Join Date: May 2001 Location: Brighton/UK Age: 48 Posts: 3,120	i've never actually owned an A600, so forgive me if this is a stupid question, but how much ram comes in a bog-standard A600, and what memory do i need to boost it up... in TOSEC i see two different versions of Workbench 2.1 38.35 (international) and 38.36 what is the version that would have been packed with an english A600? what does [m] mean at the end of the filename, is it multi-language? what is correct procedure for installing the HD in the A600 i.e. should i... take out HD from A1200, insert into A600 boot using Workbench (boot disk) format drive using the format in HD tools or whatever... ...wait... then reset machine and insert the install disk thanks for the answers to my stupid questions, i'm a workbench virgin...

27 February 2003, 02:23	#10
oldpx Posts: n/a	ram :1mb ks version: dunno I've got 2 a600s and all I needed to know was that they were 2.x I wouldn't use 3.x with an a600 anyway. 2.x is just what you need on an a600

27 February 2003, 23:50	#13
Djay 95th User Join Date: May 2001 Location: Brighton/UK Age: 48 Posts: 3,120	thanks for the info!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)