Software to play sound on each amiga channel?

Sim085 · 22 December 2018, 16:17

Hello, is there a software to play sound on each channel? I have a motherboard with sound issues. I believe one of the channels has a very low sound as I can hear some of the instruments with very low sound. I was wondering if there is some software which can play sound on each channel individually so that I can determine which are the problematic channels which hopefully might help me identify where the issue is.

Does anyone know of any such software?

chip · 22 December 2018, 16:35

I'm sure that there are some demos with the option to disable the channels you want

But i dislike i don't remember any of those, sorry

Leffmann · 22 December 2018, 16:36

Just use ProTracker and place a few notes into the channel you want to try.

roondar · 22 December 2018, 16:40

This might do the trick: http://aminet.net/package/util/cli/TestSound
I tested it and it plays a simple sound one channel after the other.

Daedalus · 22 December 2018, 17:12

There's also SysTest, which lets you play a sine wave through each channel. That makes it quite easy to trace faults if you have an oscilloscope.

-Acid- · 22 December 2018, 20:51

Pro Tracker

Sim085 · 23 December 2018, 07:27

Thanks to all for the suggestions. I've downloaded all three. Will see what results I get...

22 December 2018, 16:17	#1
Sim085 Registered User Join Date: Apr 2009 Location: N/A Posts: 962	Software to play sound on each amiga channel? Hello, is there a software to play sound on each channel? I have a motherboard with sound issues. I believe one of the channels has a very low sound as I can hear some of the instruments with very low sound. I was wondering if there is some software which can play sound on each channel individually so that I can determine which are the problematic channels which hopefully might help me identify where the issue is. Does anyone know of any such software?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga 600 right sound channel does not work	DetFedeSvin	support.Hardware	7	02 July 2018 21:14
Amiga 500 sound problem on one channel - newbie	matthewjames88	support.Hardware	4	14 July 2017 18:02
Sound channel modulation: Ever used?	NorthWay	Coders. Asm / Hardware	12	01 November 2014 02:22
A600 right sound channel not working	tomcat666	support.Hardware	8	06 June 2013 08:56
4-channel sound	andreas	support.WinUAE	9	30 July 2006 12:46

22 December 2018, 16:35	#2
chip Registered User Join Date: Oct 2012 Location: Italy Age: 49 Posts: 2,947	I'm sure that there are some demos with the option to disable the channels you want But i dislike i don't remember any of those, sorry

22 December 2018, 16:36	#3
Leffmann Join Date: Jul 2008 Location: Sweden Posts: 2,269	Just use ProTracker and place a few notes into the channel you want to try.

22 December 2018, 16:40	#4
roondar Registered User Join Date: Jul 2015 Location: The Netherlands Posts: 3,436	This might do the trick: http://aminet.net/package/util/cli/TestSound I tested it and it plays a simple sound one channel after the other.

22 December 2018, 17:12	#5
Daedalus Registered User Join Date: Jun 2009 Location: Dublin, then Glasgow Posts: 6,379	There's also SysTest, which lets you play a sine wave through each channel. That makes it quite easy to trace faults if you have an oscilloscope.

22 December 2018, 20:51	#6
-Acid- Registered User Join Date: Oct 2012 Location: South Shields Posts: 812	Pro Tracker

23 December 2018, 07:27	#7
Sim085 Registered User Join Date: Apr 2009 Location: N/A Posts: 962	Thanks to all for the suggestions. I've downloaded all three. Will see what results I get...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)