AmigaOS 3.2 and beyond - Page 78

wiz12 · 27 October 2021, 20:53

Same result with VampireMap - during bootup get a guru error screen. At this point I'll look into the ROM-Updates mechanism Thomas was talking about and see where that gets me.

The weird thing is this same 3.2 installation works fine on my 060 Amiga but not on my V1200.

Firestone · 27 October 2021, 21:15

Do you know what line in Startup-sequence the crash occurs? Setpatch maybe?

wiz12 · 27 October 2021, 23:52

Yes, if I comment out Setpatch it does bootup however then some functionality is lost such as copper-demon not working.

Firestone · 28 October 2021, 00:03

Right. Could it be a problem with 680x0 libraries in libs: since the same system boots fine on a 060 machine?
I got no active cpu library in libs:

wiz12 · 28 October 2021, 00:39

Quote:

Originally Posted by Firestone

Right. Could it be a problem with 680x0 libraries in libs: since the same system boots fine on a 060 machine?
I got no active cpu library in libs:

Yes, that was it. I removed all 680xx libraries from libs and bingo, working perfect now. Thanks a lot for your help.

vrxguy · 15 November 2021, 03:10

Would be good!

mateusz_s · 04 December 2021, 02:46

I read in FAQ about DOSDrivers/MACCD0, because I wanted to see my Mac partition under Amiga OS 3.2, but I could make it work. Is it only works with CDs with HFS?
I changed unit to 0 as my disk is. Can I see and use Mac partition somehow, for example the same way I am using my CF card with FAT and CrossDOS.. ?

Firestone · 04 December 2021, 22:32

I think it's made to work with CDs with HFS, and not harddrives.

On my Amigas, I use CrossMac which is the equalent to CrossDOS for macintosh-stuff use.

In my mountlists for my mac-partitions, the mfm.device is used in combination with L:CrossMACFileSystem

mateusz_s · 05 December 2021, 19:38

Quote:

Originally Posted by Firestone

I think it's made to work with CDs with HFS, and not harddrives.

On my Amigas, I use CrossMac which is the equalent to CrossDOS for macintosh-stuff use.

In my mountlists for my mac-partitions, the mfm.device is used in combination with L:CrossMACFileSystem

Unfortunately there is only demo version on aminet

coldacid · 05 December 2021, 20:57

Full version's on the FTP, but you might need to find a serial for it.

brett71 · 06 December 2021, 16:41

Were there any changes made to the DBLNTSC and DBLPAL monitor device files between 3.1.4 and 3.2?

I have 3.1.4 installed on my two ReAmiga 1200's. I bought a few recent, new Viewsonic monitors that support 15kHz signals, but with these machines and AmigaOS 3.1.4, I found that the DBLNTSC High-Res No Flicker screenmodes worked great and gave a nice amount of screen real estate without flicker.

Fast forward to last night when I was working with my A4000TX that I got from Hese. I'd installed 3.2 ROMs in the board, and installed AmigaOS 3.2 on it. The machine was plugged into the very same Viewsonic monitors. Normal NTSC High-Res screenmode was good, but then I tried the DBLNTSC screenmode, the same as I did on my 1200's. The Viewsonic refused to play ball though and just showed an "Out of Range" error on the monitor. I tried all of the DBLNTSC modes and they all failed to work on the monitor. Got the same results with the DBLPAL modes.

I've bought a couple more of the Viewsonic monitors and might try setting up my 1200 and the A4000TX side by side and see if there are any obvious differences to check further. I just wanted to see if anyone knew of any changes in the monitor configuration files?

Thomas Richter · 06 December 2021, 19:06

I have nothing on my list at least. This is just recompiled AFAIK.

daxb · 06 December 2021, 20:06

Try with/without VGAOnly.

utri007 · 08 December 2021, 15:51

Somebody has been selling KS3.1.4 copies on Finnish ebay huuto.net

https://www.huuto.net/kohteet/amiga-...-rom/554416476

He has sold both A1200 and A500 versions.

He has proved his identity to huuto.net staff, so they know who he is.

brett71 · 08 December 2021, 16:03

Quote:

Originally Posted by daxb

Try with/without VGAOnly.

So, I'm not exactly sure what I did, but DBLNTSC is working properly now. After posting my question, I went back to the system and installed some things like DirectoryOpus, ReqTools and MUI. Next thing I know, DBLNTSC is working as it does on my A1200's.

Firestone · 08 December 2021, 23:08

Remember to check if tooltypes has been changed between the installations.
Overwriting the dblntsc.info file will change the tool types too.
Editors like MonED changes these parameters.

boemann · 21 December 2021, 19:40

Update 3.2.1 is out now with fixes of many things that have been reported here and elsewhere. And also a handful of new features. Happy holidays

eXeler0 · 21 December 2021, 19:41

Quote:

Originally Posted by boemann

Update 3.2.1 is out now with fixes of many things that have been reported here and elsewhere. And also a handful of new features. Happy holidays

Wow, nice! many thanx

and Happy Holidays to you and the rest of the team.

btp · 21 December 2021, 20:22

Quote:

Originally Posted by boemann

Update 3.2.1 is out now with fixes of many things that have been reported here and elsewhere. And also a handful of new features. Happy holidays

Excellent news!

Is there any changelog available?

Happy holidays to all!

512k · 21 December 2021, 20:26

changlog?

scratch that https://www.hyperion-entertainment.com/ give some

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AmigaOS 3.1.x v 3.9	steve_mynott	New to Emulation or Amiga scene	35	19 April 2020 06:23
AmigaOS 3.9	PoLoMoTo	support.WinUAE	8	27 August 2011 18:06
AmigaOS 3.5 or 3.9	maddoc666	support.Apps	12	22 February 2010 08:02
AmigaOS	koncool	request.Apps	6	04 June 2003 17:45
AmigaOS XL	sturme	New to Emulation or Amiga scene	4	15 January 2002 02:13

27 October 2021, 20:53	#1541
wiz12 Registered User Join Date: Feb 2017 Location: Ireland Posts: 752	Same result with VampireMap - during bootup get a guru error screen. At this point I'll look into the ROM-Updates mechanism Thomas was talking about and see where that gets me. The weird thing is this same 3.2 installation works fine on my 060 Amiga but not on my V1200.

27 October 2021, 21:15	#1542
Firestone Registered User Join Date: Apr 2013 Location: Norway Posts: 249	Do you know what line in Startup-sequence the crash occurs? Setpatch maybe?

27 October 2021, 23:52	#1543
wiz12 Registered User Join Date: Feb 2017 Location: Ireland Posts: 752	Yes, if I comment out Setpatch it does bootup however then some functionality is lost such as copper-demon not working.

28 October 2021, 00:03	#1544
Firestone Registered User Join Date: Apr 2013 Location: Norway Posts: 249	Right. Could it be a problem with 680x0 libraries in libs: since the same system boots fine on a 060 machine? I got no active cpu library in libs:

15 November 2021, 03:10	#1546
vrxguy Registered User Join Date: Sep 2021 Location: Brisbane Posts: 23	Would be good!

04 December 2021, 02:46	#1547
mateusz_s Registered User Join Date: Jan 2020 Location: Poland Posts: 181	I read in FAQ about DOSDrivers/MACCD0, because I wanted to see my Mac partition under Amiga OS 3.2, but I could make it work. Is it only works with CDs with HFS? I changed unit to 0 as my disk is. Can I see and use Mac partition somehow, for example the same way I am using my CF card with FAT and CrossDOS.. ?

04 December 2021, 22:32	#1548
Firestone Registered User Join Date: Apr 2013 Location: Norway Posts: 249	I think it's made to work with CDs with HFS, and not harddrives. On my Amigas, I use CrossMac which is the equalent to CrossDOS for macintosh-stuff use. In my mountlists for my mac-partitions, the mfm.device is used in combination with L:CrossMACFileSystem

05 December 2021, 20:57	#1550
coldacid WinUAE 4000/40, V4SA Join Date: Apr 2020 Location: East of Oshawa Posts: 538	Full version's on the FTP, but you might need to find a serial for it.

06 December 2021, 16:41	#1551
brett71 Registered User Join Date: May 2010 Location: Ames, IA, USA Posts: 521	Were there any changes made to the DBLNTSC and DBLPAL monitor device files between 3.1.4 and 3.2? I have 3.1.4 installed on my two ReAmiga 1200's. I bought a few recent, new Viewsonic monitors that support 15kHz signals, but with these machines and AmigaOS 3.1.4, I found that the DBLNTSC High-Res No Flicker screenmodes worked great and gave a nice amount of screen real estate without flicker. Fast forward to last night when I was working with my A4000TX that I got from Hese. I'd installed 3.2 ROMs in the board, and installed AmigaOS 3.2 on it. The machine was plugged into the very same Viewsonic monitors. Normal NTSC High-Res screenmode was good, but then I tried the DBLNTSC screenmode, the same as I did on my 1200's. The Viewsonic refused to play ball though and just showed an "Out of Range" error on the monitor. I tried all of the DBLNTSC modes and they all failed to work on the monitor. Got the same results with the DBLPAL modes. I've bought a couple more of the Viewsonic monitors and might try setting up my 1200 and the A4000TX side by side and see if there are any obvious differences to check further. I just wanted to see if anyone knew of any changes in the monitor configuration files?

06 December 2021, 19:06	#1552
Thomas Richter Registered User Join Date: Jan 2019 Location: Germany Posts: 3,215	I have nothing on my list at least. This is just recompiled AFAIK.

06 December 2021, 20:06	#1553
daxb Registered User Join Date: Oct 2009 Location: Germany Posts: 3,303	Try with/without VGAOnly.

08 December 2021, 15:51	#1554
utri007 mä vaan Join Date: Nov 2001 Location: Finland Posts: 1,653	Somebody has been selling KS3.1.4 copies on Finnish ebay huuto.net https://www.huuto.net/kohteet/amiga-...-rom/554416476 He has sold both A1200 and A500 versions. He has proved his identity to huuto.net staff, so they know who he is.

08 December 2021, 23:08	#1556
Firestone Registered User Join Date: Apr 2013 Location: Norway Posts: 249	Remember to check if tooltypes has been changed between the installations. Overwriting the dblntsc.info file will change the tool types too. Editors like MonED changes these parameters.

21 December 2021, 19:40	#1557
boemann Camilla, AmigaOS Dev. Join Date: Mar 2020 Location: Frederiksberg Posts: 327	Update 3.2.1 is out now with fixes of many things that have been reported here and elsewhere. And also a handful of new features. Happy holidays

21 December 2021, 20:26	#1560
512k Registered User Join Date: Dec 2017 Location: Creatures Land Posts: 202	changlog? scratch that https://www.hyperion-entertainment.com/ give some

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)