CD32 with tf328 and kipper not working with 1084s

[Klonka]

Hi,
I have a problem when hooking up my 1084s monitor to the tf328.
I do not know if the fault is on the tf328, the cable or the monitor. Or maybe (if I'm really lucky) it's only a display setting on the workbench that needs to be changed?

The monitor works as it should when i connect a NES through composite.
The tf328 works when I connect the console with a s-video cable to my CRT.

I am using this cable - https://amigastore.eu/en/258-monitor...to-din6-m.html

See this video that shows how it looks when turning the console on - https://imgur.com/a/gUgebUR
I see now that the video quality leaves a lot to be desired. But if you pause the video you can see a bit more. On the end when the system has started you can see that colors (from the workbench?) shows.

I have no other cable or console to try in the "lin RGB" port on my 1084s so it is hard for me to understand where the problem lies.
My hope is that someone will see where the problem lies by my explanation and by looking at this video

[alexh]

If you remove the CF card and CD it should boot to a 15KHz compatible screen.

Can you confirm the cable & monitor work using a different Amiga? Do you not have a friend with one?

[Klonka]

Originally Posted by alexh

If you remove the CF card and CD it should boot to a 15KHz compatible screen.

Can you confirm the cable & monitor work using a different Amiga? Do you not have a friend with one?

Thank you for trying to help.
I've now tried removing the CF card but it's the same problem.

Sorry but I do not have any friend with an amiga =(.
But do you know that it should work with this setup?

[alexh]

Yes