Diagrom "Rainbow" How to interpret?

jasonsbeer · 21 January 2022, 02:49

What are the instructions to interpret this screen?

Amiga 2000, Diagrom 1.2.1. No serial output. Goes to this screen after a few seconds. Nothing more. I can't find any documentation on this. Thanks!

EDIT...I did find the color codes. I see purple/black in the list, but I still do not understand the purple fading to green. If anyone has suggestions, I am happy to hear them.

Quote:

NOTE: Sometimes hardwareproblems might do that colorcodes are not visible. text is also dumped on serialport.

Detecting Chipmem
Black/Green

Detected Chipmemerrors
Green/Red

BusError:
Red/White

AddressError
Red/Purple

Illegal Instruction
Red/Cyan

Division By Zero
Red/Yellow

Chk Instruction
Red/Blue

TrapV
Black/White

Priv Vil
Black/Purple

Trace
Black/Cyan

Unimplemented Intruction
Black/Yellow

No Memory detected:
Green/Dark Green

No Chipmem, Fastmem detected:
Flashing bars on screen when chars is printed. Text output on Serialport 9600BPS ONLY.
Can also be forced by holding left mousebutton during poweron, if no fastmem, chipmem is used but no screen is turned on.

jasonsbeer · 23 January 2022, 06:40

This was caused by Paula not getting +5V.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DiagROM stuck at "Detecting if we have a working raster"	Turrican_3	support.Hardware	4	02 May 2021 18:18
A500 Green Screen. DiagROM says: "raster: NOT DETECTED"	retrofriends	support.Hardware	12	18 January 2020 04:04
New "Stable" of my DiagROM	Chucky	support.Hardware	4	07 August 2016 10:28
"Mad rainbow" screens	Mr Softy	Retrogaming General Discussion	8	29 November 2002 17:23

23 January 2022, 06:40	#2
jasonsbeer Registered User Join Date: May 2020 Location: Iowa, USA Posts: 150	This was caused by Paula not getting +5V.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)