FTPMount setup but failing to show files

[IvanEBC]

Hi Guys.

I ramble on so i'll try to keep this simple.

Firstly and most importantly, FTP from my Amiga 4000 to my PC is currently setup and working and i use AmiTradeCenter ... only moving to FTPmount because ATC has a habit of crashing and the idea of using ftpmount though Dopus seems very appealing.

Everything seems to be setup, i got the host icon setup as follows
SLOW
ROOT=/
HOST=10.0.1.xx
USER=4000
PASSWORD=****
STATUS
TIMEOUT=600

If i use ATC to connect, and once connected, i see a list of files, the filezilla log looks like this

SUCCESS WITH AMITRADECENTER
(000001)21/09/2018 1:17:59 AM - (not logged in) (10.0.1.92)> Connected on port 21, sending welcome message...
(000001)21/09/2018 1:17:59 AM - (not logged in) (10.0.1.92)> 220-FileZilla Server 0.9.60 beta
(000001)21/09/2018 1:17:59 AM - (not logged in) (10.0.1.92)> 220 Amiga Sharing FTP Server
(000001)21/09/2018 1:17:59 AM - (not logged in) (10.0.1.92)> USER 4000
(000001)21/09/2018 1:17:59 AM - (not logged in) (10.0.1.92)> 331 Password required for 4000
(000001)21/09/2018 1:17:59 AM - (not logged in) (10.0.1.92)> PASS ****
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> 230 Logged on
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> CWD /
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> 250 CWD successful. "/" is current directory.
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> PWD
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> 257 "/" is current directory.
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> PORT 10,0,1,92,62,166
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> 200 Port command successful
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> LIST
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> 150 Opening data channel for directory listing of "/"
(000001)21/09/2018 1:17:59 AM - 4000 (10.0.1.92)> 226 Successfully transferred "/"

Everythign works as per normal.
Reboot, clean everything, try again with FTPmount.. this is the filezilla log

FAILURE WITH FTPMOUNT
(000001)21/09/2018 1:23:19 AM - (not logged in) (10.0.1.92)> Connected on port 21, sending welcome message...
(000001)21/09/2018 1:23:19 AM - (not logged in) (10.0.1.92)> 220-FileZilla Server 0.9.60 beta
(000001)21/09/2018 1:23:19 AM - (not logged in) (10.0.1.92)> 220 Amiga Sharing FTP Server
(000001)21/09/2018 1:23:19 AM - (not logged in) (10.0.1.92)> USER 4000
(000001)21/09/2018 1:23:19 AM - (not logged in) (10.0.1.92)> 331 Password required for 4000
(000001)21/09/2018 1:23:19 AM - (not logged in) (10.0.1.92)> PASS ****
(000001)21/09/2018 1:23:19 AM - 4000 (10.0.1.92)> 230 Logged on
(000001)21/09/2018 1:23:22 AM - 4000 (10.0.1.92)> TYPE I
(000001)21/09/2018 1:23:22 AM - 4000 (10.0.1.92)> 200 Type set to I
(000001)21/09/2018 1:23:22 AM - 4000 (10.0.1.92)> CWD /
(000001)21/09/2018 1:23:22 AM - 4000 (10.0.1.92)> 250 CWD successful. "/" is current directory.
(000001)21/09/2018 1:23:22 AM - 4000 (10.0.1.92)> PASV
(000001)21/09/2018 1:23:22 AM - 4000 (10.0.1.92)> 227 Entering Passive Mode (10,0,1,27,196,150)
 (000001)21/09/2018 1:24:38 AM - 4000 (10.0.1.92)> disconnected.

Some slight differences.....
In terms of the Amiga - once i click on the folder in my hosts directory, a popup says login successful and i click it away, the status window appears saying "listing" and well till it times out and says disconnected after a minute, and nothing appears in the Workbench "localhost" window.


Man, i'm so close, but i just can't get files to appear. Wonder if i'm missing something really simple.


Thanks for taking the time to look.

[kolla]

Very interesting that ftpmount enters passive mode, I was not aware it can do that. Since you are on LAN you don't really need it though, it might be what confuse the ftp server.


Sent from my iPhone using Tapatalk Pro

[IvanEBC]

Think this is why i can't see my files? Any ideas about a way to sdtop it, i read through all the various tooltypes and there's nothing about modes..... meaning that maybe filezilla is doing that but i don't see much in there about that.

Only other thing i see different is the "Type set to I" but everything i read, suggests thats fine, though ATCs connection isn't doing that and it works.... man, i've come so far but this last hurdle is a killer.