14 June 2022, 22:02 | #1 |
Registered User
Join Date: Jan 2020
Location: UK
Posts: 109
|
Making External gotek from external Cumana drive?
Hi, I am trying to make an external gotek drive, using the case and connections of an external cumana drive(which works normally).However, when I connect a working gotek to it, and then power up, it says the cable is upside down.. but it's not a cable, its connected by the black idc from the cumana pcb into the gotek drive? Any idea how I solve this? Is there a cable I need to swap around?
Cheers Utukku |
15 June 2022, 08:37 | #2 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,921
|
Try doing it as it recommends, plug the data cable into the gotek "upside down" to see whether it likes it better that way. Don't flip the power cable. :-)
Lots of old early 90s 3.5" mechanisms had the connector in the other way around than in the Gotek. If it is indeed upside down, you will have to solve this somehow. I just sliced up the ribbon cable into strands of two as a kid when I swapped in a different oriented floppy mech into my external drive. This made it flexible enough to twist around. These days I'd probably crimp together a longer cable so I didn't have to slice it up as much. |
15 June 2022, 10:36 | #3 |
Registered User
Join Date: Dec 2016
Location: East Kilbride, Scotland
Posts: 452
|
The problem with the Cumana drives is that the connection from the board to the drive is upside down compared to normal floppies.
So your Gotek pinout looks like this: Data lines ----------- GND Lines while the Cumana is like this GND Lines ------------ Data Lines So when you plug the Gotek in it reports that the cable is upside down. What I did on mine was removed the IDC connector and replaced it with pins and used a shortened ribbon cable that only connected the Data lines, The Gotek doesn't need any of the extra GND lines and will work fine without them |
15 June 2022, 21:34 | #4 | |
Banned
Join Date: Feb 2022
Location: Anywhere and everywhere I have a contract
Posts: 822
|
Quote:
https://www.ebay.co.uk/itm/334475217...mis&media=COPY |
|
16 June 2022, 22:56 | #5 |
Registered User
Join Date: Jan 2020
Location: UK
Posts: 109
|
Thanks for all the replies. I did try turning the cable around, but as we now know, that wouldn't work. So I bought that cable adaptor :-)
Utuku |
17 June 2022, 00:09 | #6 |
Banned
Join Date: Feb 2022
Location: Anywhere and everywhere I have a contract
Posts: 822
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
External Cumana 5.25" Floppy drive. | Santi | support.Hardware | 1 | 15 October 2020 21:03 |
Gotek as external drive | pincoo | support.Hardware | 16 | 16 February 2018 15:49 |
EDU - External Disk Unit | External gotek for Commodore Amiga with LCD & Sound | arananet | Amiga scene | 7 | 02 April 2016 21:06 |
Cumana external amiga disk drive questions | Galder | support.Hardware | 2 | 27 April 2014 21:29 |
Black Cumana External floppy drive - have you ever seen one? | Gordon | support.Hardware | 7 | 17 June 2011 00:57 |
|
|