D3D Fillers Black Screen

Mixon · 29 December 2021, 13:28

Hi!

On my computer (Win10, Geforce GFX card) the WinUAE (4.9.0 64bit) display black screen when I'm use on the filter tab the D3D autoscale or the D3D full scaling. I don't know why.

Trying the older versions of WinUAE, but the problem not solved.

Thanx for any help!

Mike

Toni Wilen · 30 December 2021, 19:52

Do you also get blank screen if filter is set to "no scaling"?

Mixon · 30 December 2021, 21:47

Where is "no scaling"?
I have only "PAL", "D3D Autoscale" and "D3D Full Scaling".

Tomislav · 31 December 2021, 12:25

You can select "No scaling" in "Filter" on right upper side under button "Reset to defaults".

Toni Wilen · 31 December 2021, 13:39

Ah, you meant filter presets. Both work here. You can try manually adjusting filter panel settings one by one to see if anything changes.

(and "PAL" will be deleted, it does not work and probably has not been working for a long time..)

29 December 2021, 13:28	#1
Mixon Registered User Join Date: Nov 2021 Location: Budapest Posts: 45	D3D Fillers Black Screen Hi! On my computer (Win10, Geforce GFX card) the WinUAE (4.9.0 64bit) display black screen when I'm use on the filter tab the D3D autoscale or the D3D full scaling. I don't know why. Trying the older versions of WinUAE, but the problem not solved. Thanx for any help! Mike

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga CD32 will not boot. Green screen power light blinks, later a black screen	retrofriends	support.Hardware	2	24 July 2020 18:40
Full-screen mode black screen with Default refresh rate	mark_k	support.WinUAE	4	16 February 2016 20:29
Black screen with 50 hz D3D not(DD) in WinUAE 2.3.3 from 60 hz setup in Win 7	Mixter	support.WinUAE	7	26 February 2012 19:19
WinUAE 2.3 D3D blank screen	Steve	support.WinUAE	48	15 April 2011 02:07
D3D windowed / full window switch -> black emulation screen	Maccara	support.WinUAE	4	15 May 2010 15:17

30 December 2021, 19:52	#2
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Do you also get blank screen if filter is set to "no scaling"?

30 December 2021, 21:47	#3
Mixon Registered User Join Date: Nov 2021 Location: Budapest Posts: 45	Where is "no scaling"? I have only "PAL", "D3D Autoscale" and "D3D Full Scaling".

31 December 2021, 12:25	#4
Tomislav Registered User Join Date: Aug 2014 Location: Zagreb / Croatia Posts: 302	You can select "No scaling" in "Filter" on right upper side under button "Reset to defaults".

31 December 2021, 13:39	#5
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Ah, you meant filter presets. Both work here. You can try manually adjusting filter panel settings one by one to see if anything changes. (and "PAL" will be deleted, it does not work and probably has not been working for a long time..)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)