Problems with Sensible Soccer install

MethodGit · 28 February 2006, 20:51

Okay, I'll try to explain this as well as possible. First my setup:

WinUAE 1.1.1
ClassicWB P96 version
CPU: 68020 + FPU
CPU Chipset speed: Fastest possible
4Mb JIT
2Mb Chip
32Mb Z3-Fast
4Mb RTG
Kickstart v3.1 (A4000) rev 40.70
AGA chipset

As it's ClassicWB, WHDLoad is already pre-installed (v16.4). I chose to replace the old RawDIC with v4.2 (but kept the old one on the side just in case), and additionally installed the SPS device and TrackWarp library. I have all the Sensible Soccer SPS images.

Now my main problem is: despite creating the data files okay, upon starting WHDLoad complains that they're broken or are of an unsupported version, even though I used a) originals, and b) versions it supported (original, European, International).

It started with me inserting the original Sensi Soccer disks through WinUAE and having RawDIC 4.2 read them from the "floppy drive". They read okay, but the game wouldn't work afterwards anyway. I'm not sure whether this has anything to do with the fact I set the floppy speed to 800% at the time.

Then I tried to install again, but this time used the "Select File" option and loaded the IPFs through that. Extracts the data ok (a lot quicker of course), but again WHDLoad complains about the files not being 'exactly' right. This happened with all versions of Sensi Soccer in existence.

I'm not sure if it's some kind of incompatibility problem somewhere, wherever it's a problem with RawDIC, or whether the slave requires a WHDLoad newer than 16.4. The readme just says "WHDLoad 14+ and RawDIC".

Do any of you know where I'm going wrong here? Thank you, and I look forward to the impending replies.

BippyM · 28 February 2006, 21:20

makesure you set drive speed to 100% and try again

Psygore · 01 March 2006, 11:47

There is a bug in RawDIC 4.x, versions 3.x are ok.
Use the lastest RawDIC 4.3

MethodGit · 01 March 2006, 18:50

Changing the drive speed didn't work, but updating RawDIC certainly did! Cheers Psygore!

And I'm loving the previously-undiscovered SplashDelay tooltype already!

Npl · 02 March 2006, 18:39

Quote:

Originally Posted by Psygore

There is a bug in RawDIC 4.x, versions 3.x are ok.
Use the lastest RawDIC 4.3

Damn, I installed a few Games with 4.x Versions... when does it cause problems exactly? I dont want to keep damaged files, no matter if they cause trouble or not.

Psygore · 02 March 2006, 21:04

The bug occurs when RawDIC creates real files from disk image ie. Cavitas, Shufflepuck Cafe, ...

28 February 2006, 20:51	#1
MethodGit Junior Member Join Date: Dec 2002 Location: The Streets Age: 39 Posts: 2,731	Problems with Sensible Soccer install Okay, I'll try to explain this as well as possible. First my setup: WinUAE 1.1.1 ClassicWB P96 version CPU: 68020 + FPU CPU Chipset speed: Fastest possible 4Mb JIT 2Mb Chip 32Mb Z3-Fast 4Mb RTG Kickstart v3.1 (A4000) rev 40.70 AGA chipset As it's ClassicWB, WHDLoad is already pre-installed (v16.4). I chose to replace the old RawDIC with v4.2 (but kept the old one on the side just in case), and additionally installed the SPS device and TrackWarp library. I have all the Sensible Soccer SPS images. Now my main problem is: despite creating the data files okay, upon starting WHDLoad complains that they're broken or are of an unsupported version, even though I used a) originals, and b) versions it supported (original, European, International). It started with me inserting the original Sensi Soccer disks through WinUAE and having RawDIC 4.2 read them from the "floppy drive". They read okay, but the game wouldn't work afterwards anyway. I'm not sure whether this has anything to do with the fact I set the floppy speed to 800% at the time. Then I tried to install again, but this time used the "Select File" option and loaded the IPFs through that. Extracts the data ok (a lot quicker of course), but again WHDLoad complains about the files not being 'exactly' right. This happened with all versions of Sensi Soccer in existence. I'm not sure if it's some kind of incompatibility problem somewhere, wherever it's a problem with RawDIC, or whether the slave requires a WHDLoad newer than 16.4. The readme just says "WHDLoad 14+ and RawDIC". Do any of you know where I'm going wrong here? Thank you, and I look forward to the impending replies.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
winuae install problems	flipper	support.WinUAE	5	13 December 2007 13:26
Install Problems, I Had A Few	douglasamcintos	project.ClassicWB	9	19 September 2007 00:14
Key problems with Sensible Soccer	Ludgi	support.WinUAE	0	09 February 2006 21:52
Problems with AmigaOnline Sensible Soccer (Kaillera)	nameless91	support.WinUAE	6	07 August 2005 23:44
Install problems	BA	support.WinUAE	3	03 June 2002 02:14

28 February 2006, 21:20	#2
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	makesure you set drive speed to 100% and try again

01 March 2006, 11:47	#3
Psygore Moderator Join Date: Jan 2002 Location: France Posts: 491	There is a bug in RawDIC 4.x, versions 3.x are ok. Use the lastest RawDIC 4.3

01 March 2006, 18:50	#4
MethodGit Junior Member Join Date: Dec 2002 Location: The Streets Age: 39 Posts: 2,731	Changing the drive speed didn't work, but updating RawDIC certainly did! Cheers Psygore! And I'm loving the previously-undiscovered SplashDelay tooltype already!

02 March 2006, 21:04	#6
Psygore Moderator Join Date: Jan 2002 Location: France Posts: 491	The bug occurs when RawDIC creates real files from disk image ie. Cavitas, Shufflepuck Cafe, ...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)