OxyPatcher in WBStartup crashes every boot

[Photon]

I have a WB3.1 with ClassicWB on a CF card that I use in 3 Amigas.

I've made conditional commands to initialize accelerators properly.

On 68000 though, the second part of OxyPatcher crashes when WB appears, likely from 68020 instructions checking if you have an FPU...

The first part of OxyPatcher in s-s is not run because I check if I have an FPU and skip it if not.

For now I've moved it out of WBStartup folder to another place and start it manually, but can I make programs in WBStartup conditionally executed?

(And what is WBStartupM? Empty folder in SYS: )

Edit: Maybe this should be in Support.AmigaOS or Support.Apps - fee free to move.

[Seiya]

oxypatch working only on 68040/060 processors
The better config is:

startup-sequence, the first line:
C:OpenOxyPPort

in wbstartup only:
oxypatcher.pref

[zipper]

The latest version of Oxypatcher didn't need OpenOxyPPort.

[Photon]

Originally Posted by Seiya

oxypatch working only on 68040/060 processors
The better config is:

startup-sequence, the first line:
C:OpenOxyPPort

in wbstartup only:
oxypatcher.pref

Oh. So the problem is only that both OxyPatcher and OxyPatcher.pref was put in WBStartup?

Just tested (on non-68040+ Amiga). Putting only the .pref in WBStartup doesn't cause the crash, but also not starting OxyPatcher, I think.

Also tested on A1260, putting only the .pref in there will not start OxyPatcher. (Benchmark from cold start.)

Originally Posted by zipper

The latest version of Oxypatcher didn't need OpenOxyPPort.

I have 3.12.

But OpenOxyPPort is not the problem.

The solution currently (as I see it) is to copy Oxypatcher#? to WBStartup if 040+ else delete it (in s-s).

But thx for input, appreciate it