![]() |
![]() |
#1 |
Moderator
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,656
|
uae-configuration warpmode settings don't invoke warp mode.
What the title says.
I'm also curious as to if there are more settings to warpmode than gfx_framerate=10, and if there are settings for cpu, cycle exact cpu/chipset, cpu freq, immediate blits etc that it is incompatible with. |
![]() |
![]() |
#2 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,570
|
Yes, it is broken. Fixed later in 2.0.2 betas (I am going to do one not so small configuration handling change)
Quote:
![]() |
|
![]() |
![]() |
#3 |
Moderator
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,656
|
Hehe, nothing special. I just want to make sure that if I go warp mode I don't leave some other setting related to speed in some value which could cause problems in warp mode.
What I would like to do is to set an A500 cycle exact emulation which is default, and at the start of s-sequence go non-cycle exact, fastest possible, and immediate blitter + warpmode, and at the end of s-seq go back to perfect cycle exact emulation. |
![]() |
![]() |
#4 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,570
|
Warp + non-cycle exact should be fast enough. Fastest possible should be about same as non-fastest + warp anyway and immediate blitter really won't have any effect at all. (at least during normal OS boot)
|
![]() |
![]() |
#5 |
Moderator
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,656
|
Yes, it is indeed fast.
Boot times for ClassicWB: (approx) Warp - CPU-timing - Chipset - Blitter = Boot time (s) Off - Exact - nonexact - immediate = 11 Off - Fastest - nonexact - immediate = 4 On - Fastest - nonexact - immediate = 1 |
![]() |
![]() |
#6 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,570
|
"uae-configuration warp true" works in latest beta. (or warp=true in config file)
|
![]() |
![]() |
#7 |
Moderator
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,656
|
Hey, great news! Will try immediately...
|
![]() |
![]() |
#8 |
Moderator
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,656
|
At first I got the usual 'uae-configuration failed returncode 20' when executed from the s-seq, and the usual 'no effect' when typed manually from CLI.
So I turned on logging and saved the config and Quit. (To start it again and give you a bootlog.) And lo and behold, it worked ![]() The only thing I did first time was to replace winuae.exe (and .fx files, just because they were in the archive) and double-click winuae.exe+Start in Quickstart panel. Then I manually added harddrive directory and changed to kick 3.1, and Reset, and got the error. Enabled logging, saved config, Quit. Second time I just double-clicked winuae.exe, double-clicked the config, and it worked. I'm very happy since it is fixed, if you feel interested in finding out what the difference between the two startups is I attached some files. Grrrreat Toni ![]() ps. Maybe it fails when there is no warp entry in the 'config file memory structure' (or if you use a temporary file for it), so it can't change the value? But when a config is saved with the fixed beta, an entry is there. Maybe this is the same for other new entries, f.ex. changes you made lately in Display/Filter settings? If you can confirm this, it could be a good tip to always delete all previously created configs as soon as you upgrade? Or if you could confirm that a re-save of a '1 day old' config with the new version will make the proper changes? Only theory of course. I will now set warp=true in the config file and see if it speeds up the reset/boot cycle... I'm on pins and needles here ![]() |
![]() |
![]() |
#9 |
Moderator
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,656
|
Indeed it does
![]() Edit: On next reboot it's gone until s-seq executes of course. But ClassicWB loading in 1.3 seconds from 'Winuae Shortcut pressed' is more than ample compensation for this gargantuan letdown... höhö... Bonus happy elefant image ![]() Last edited by Photon; 28 February 2010 at 18:38. |
![]() |
![]() |
#10 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,570
|
I think keyboard "reset warning" feature can be used to run uae-configuration before system is reset. ExecuteOnReset (aminet) seems to do that. (make sure KB reset warning is ticked in adv. chipset panel)
|
![]() |
![]() |
#11 |
Moderator
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,656
|
Ah. Seems nice a very handy app - will it work the same on real Amigas?
If so, I might keep it as a problem-solver for some future expansion-thingy maybe. But I had a think about it, and I think warp=true in the config and a warpmode toggle bound to a key is easy and okay. |
![]() |
![]() |
#12 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,570
|
|
![]() |
![]() |
#13 |
Moderator
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,656
|
You mean: "It's made in 2000, so ofc no backwards compatibility"? Or what do you mean
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS-UAE: Configuration | gilgamesh | support.FS-UAE | 6 | 24 April 2012 11:31 |
Low display update rate in 'Warp Mode' on D3D/fullscreen | NoX1911 | support.WinUAE | 2 | 06 February 2011 16:17 |
workbench 2.05 is forgetting my screen mode settings | lost_lemming | support.Apps | 5 | 23 February 2010 18:33 |
warp mode and clock | Marcuz | support.WinUAE | 8 | 06 August 2007 21:07 |
'Warp Mode' broken in 'windowed mode' | NoX1911 | support.WinUAE | 3 | 26 May 2007 01:05 |
|
|