18 November 2021, 13:01 | #1 |
It's coming back!
Join Date: Jul 2018
Location: comp.sys.amiga
Posts: 762
|
Does this floppy connector come off?
Don’t want to break it, but it doesn’t seem to want to move.
Last edited by deimos; 21 November 2021 at 12:03. |
18 November 2021, 13:24 | #2 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,861
|
Seems to be a soldered IDC connector judging by the picture, so don't pull it off, it will break.
Edit: looks like an A1000. I've had a few where the flat cable was permanent with a soldered IDC connector on the motherboard end. Seems the owner cut the cable for this photo: http://amiga.resource.cx/photos/phot...res=hi&lang=en |
18 November 2021, 13:25 | #3 |
Registered User
Join Date: Feb 2012
Location: United Kingdom
Posts: 3,173
|
This is a tough one... yes looks soldered.
|
18 November 2021, 13:30 | #4 | |
It's coming back!
Join Date: Jul 2018
Location: comp.sys.amiga
Posts: 762
|
Quote:
|
|
18 November 2021, 13:31 | #5 |
It's coming back!
Join Date: Jul 2018
Location: comp.sys.amiga
Posts: 762
|
So, where does that leave me when it comes to adding a Gotek?
|
18 November 2021, 13:36 | #6 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,861
|
I would use the existing cable to plug it in.
Were you looking to connect both the gotek and the internal drive at the same time? In that case you can extend the floppy cable with a 34 pin IDC cable that has a male connector crimped to one end and two females to the other end. |
18 November 2021, 13:46 | #7 | |
It's coming back!
Join Date: Jul 2018
Location: comp.sys.amiga
Posts: 762
|
Quote:
|
|
18 November 2021, 15:34 | #8 |
Registered User
Join Date: May 2018
Location: Germany, Baden-Wuerttemberg
Posts: 387
|
Be aware that you have to put the male IDC connector on the 'backside' of the cable. I.e. if you lay the cable flat on the table and the two female connectors that attach to the Gotek and Floppy are facing down, the male connector has to be facing up...
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Floppy drive power connector (on Amigastore's External Floppy Disk Drive Adapter) | arkpandora | support.Hardware | 4 | 18 September 2017 23:41 |
CDTV Internal floppy connector. | Arnie | Hardware mods | 0 | 21 January 2016 22:07 |
short internal floppy connector Q | dirkies | support.Hardware | 4 | 28 January 2015 15:56 |
How much power can be drawn from the floppy connector? | Snowwie | support.Hardware | 13 | 14 March 2014 11:30 |
Toshiba external floppy connector | rkauer | Hardware mods | 0 | 22 September 2008 23:45 |
|
|