Toshiba 1.4GB MK1403MAV Hard Disk Controller

ScottC2010 · 27 November 2022, 17:52

Hi,
Does anyone have one of these spare as my pins have broken (Already tried to fix but not worked)
Drive spins up nicely so should work fine with new board

Exodous · 28 November 2022, 10:22

Even if you can find a board of exactly the same revision, the flash on the board usually has configuration tuning parameters specific to your drive, so swapping the board is highliy unlikely to work and may actually corrupt what is there.

You may be better off trying to solder the wires on a spare IDE cable directly onto the PCB in order to dump the contents of the disk?

ScottC2010 · 28 November 2022, 13:40

Quote:

Originally Posted by Exodous

Even if you can find a board of exactly the same revision, the flash on the board usually has configuration tuning parameters specific to your drive, so swapping the board is highliy unlikely to work and may actually corrupt what is there.

You may be better off trying to solder the wires on a spare IDE cable directly onto the PCB in order to dump the contents of the disk?

Thanks - i'll take a look into that

27 November 2022, 17:52	#1
ScottC2010 Registered User Join Date: Apr 2017 Location: Leamington Spa / Warwickshire Posts: 375	WANTED - Toshiba 1.4GB MK1403MAV Hard Disk Controller Hi, Does anyone have one of these spare as my pins have broken (Already tried to fix but not worked) Drive spins up nicely so should work fine with new board Attached Thumbnails Last edited by ScottC2010; 27 November 2022 at 18:02. Reason: Add WANTED

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PDF user manual for A2090 hard disk controller	mark_k	request.Other	9	11 April 2020 02:29
A590 and 4gb hard drive	2E0TMF	support.Hardware	41	04 January 2011 07:01
4GB CF IDE HARD DISK www.amigakit.com	amigakit.com	MarketPlace	0	22 September 2010 15:24
after a 4gb 2.5" hard drive	CU_AMiGA	MarketPlace	9	02 March 2008 20:17
6.4Gb Hard Drive in winuae	pvt_beano	support.WinUAE	2	19 January 2006 11:05

28 November 2022, 10:22	#2
Exodous Registered User Join Date: Sep 2019 Location: Leicester / England Posts: 185	Even if you can find a board of exactly the same revision, the flash on the board usually has configuration tuning parameters specific to your drive, so swapping the board is highliy unlikely to work and may actually corrupt what is there. You may be better off trying to solder the wires on a spare IDE cable directly onto the PCB in order to dump the contents of the disk?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)