English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 17 April 2019, 19:51   #1
MyChickenNotRaw
 
Posts: n/a
New ACA500+ user - Having issues installing Workbench

Hi all,

I have tried to use the ACA500plus automatic installer menu to install workbench onto a freshly formatted FAT32 card.

It goes through process of mounting the 7 virtual disk images and then loads into Workbench but I get the following message:
"Not a DOS disk in device ACAVD6"


If I try and use the F7 non auto method I see the following disks on the workbench screen.

Ram Disk
Install 3.1
ACAVD1:NDOS
ACAVD2:NDOS
ACAVD3:NDOS
ACAVD4:NDOS
ACAVD5:????

I have tried flashing all the firmware's on the ACA support page and this doesn't seem to change anything.

My a500+ has a gotek which allows me to mount the workbench ADFs and install successfully but I would rather use the ACA autoinstall to get everything fully supported. Also I'm worried a might have faulty card.

Thanks in advance!
Mark
 
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Amiga ACA500+ addition and Workbench install jcrubin support.Hardware 1 09 April 2018 18:04
Workbench 3.1 User Startup Mister-Kyle support.Apps 6 17 April 2017 19:05
Easynet issues after re-installing on new cf-hd Riempie support.Apps 12 01 January 2017 02:03
A500+ACA500+ACA1220 ClassicWB_OS39_v28 issues and observations rfancella support.Hardware 0 18 March 2016 18:48
Can the ACA500 boot Workbench 1.3 from CF gurth support.Hardware 2 02 March 2014 21:09

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 15:27.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Page generated in 0.06606 seconds with 13 queries