![]() |
![]() |
#1 |
FS-UAE Developer
![]() Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
![]()
FS-UAE now runs quite well on Raspberry Pi 4, especially if you overclock it to 2.0 GHz. Of course, how much raw power you need depend on what you emulate. Amiga 500 cycle-exact emulation can be quite demanding.
Download: FS-UAE_4.0.57-master_Linux_ARMv8.tar.xz Please remember that this is an in-development version 4 of FS-UAE, not yet ready with all features (see https://eab.abime.net/showthread.php?t=106562). Also, I haven't done any builds of FS-UAE Launcher yet (it runs fine on the Pi 4 though). Recommended setup
By overclocking your Pi to 2.0 Ghz, you can run most Amiga 500 (and 68000) software in cycle exact mode without slowdown. You can of course use the Pi with a lower clock speed if it runs fast enough for you. Make sure the Raspberry Pi 4 is sufficiently cool If the Raspberry Pi 4 gets too hot, it will automatically throttle down the system and this will kill performance. There are tools you can use to monitor the temperature and see if your RPI4 is being throttled. The Raspberry Pi 400 can in my experience run at 2 Ghz constantly without overheating. And even better; the cooling is passive, so there is no fan noise! Set performance CPU governor If the CPU is allowed to throttle up on demand only, the timing of FS-UAE can be affected (threads not responding quickly enough after going to sleep). So I recommend switching to the `performance` CPU governor while running FS-UAE. Code:
sudo apt install cpufrequtils sudo cpufreq-set -g performance cpufreq-infothat your Raspberry Pi runs at 2 Ghz. This is not a permanent setting, a reboot will clear it. So remember to re-apply the setting before running FS-UAE after a reboot. This is mostly important if you want stable frame rates (and especially for vsync). X11 vs console (KMSDRM) Run FS-UAE from the console for best performance. When running under X11, tearing can be observed even when using v-sync, and there are also stuttering (missed v-blanks) occurring quite often with X11 (about every second?). UPDATE 2021-10.21: The situation seems much better with updated Raspberry Pi OS. Tearing seems to be gone? However, there is still some occasional stuttering compared to running from console. Note about v-sync and smooth scrolling By default, the Raspberry Pi version tries to switch to 1920x1080@50Hz when running from the console (using the KMSDRM SDL2 backend). It will also automatically enable vsync in this case. This will be configurable later, of course. Last edited by FrodeSolheim; 03 November 2021 at 09:23. |
![]() |
![]() |
#2 |
FS-UAE Developer
![]() Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
I've also built plugins for the Raspberry Pi 4:
CAPSImg_5.1.2_Linux_ARMv8.tar.xz QEMU-UAE_3.8.6_Linux_ARMv8.tar.xz (Haven't tested this one - and possibly pointless, performance-wise) |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2021
Location: England
Posts: 1,330
|
compiled fs-uae a while back for my Pi400 (inc launcher), runs pretty good, 1 question about the pi4/pi400 tho, i recall other uae ports as well as winuae ofc, can use programs like winlaunch (native code stuff?) to launch programs on the host system, i never really found much info on this regarding FS-UAE, can it use the likes of WinLaunch?
Only ask as this would be very handy exactly for Pi solutions to create a bootable usb that kicks up straight into FS-UAE, being able to launch chrome/vlc would be a godsend for those systems to make the emulated amiga more able to do normal day to day things. |
![]() |
![]() |
#4 | |
FS-UAE Developer
![]() Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
Quote:
It gets more "difficult" when starting to ask questions like: - Should it do more than just launch programs? - Minimize itself, remove fullscreen status? - Does anyway expect it to be able to access files from within the Amiga - i.e. should you be able to launch vlc from the Amiga with the path to a video file from within the Amiga? This could be somewhat trivial if using a directory hard drive at least. People have been asking about this from time to time, but no-one has come with a detailed proposal on how such integration should work in practice, so I haven't bothered with it. One would need to write a host plugin for this, as well as an m68k program using this plugin. I can help with this if there is a good and though-trough use-case for it. |
|
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2021
Location: England
Posts: 1,330
|
just need simple "launch abc/xyz" basically just WinLaunch (to launch most standalone programs like a browser/whatever the amiga lacks bigtime, and a browser is exactly the main thing, i believe this is what amikit uses for its rabbithole feature), its instructions (for winuae) is...
Code:
Installation ============ - Copy winlaunch to c: on the Amiga side (or somewhere in your path). - Copy winlaunch.alib into a drawer named 'winuae_dll' (create it if it does not exist) in your WinUAE folder on the Windows side (eg, c:\winuae\winuae_dll). Last edited by DisasterIncarna; 03 November 2021 at 12:34. |
![]() |
![]() |
#6 |
FS-UAE Developer
![]() Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
No, the original native interface in WinUAE is very win32/WinUAE-specific. The replacement uaenative interface should work in both FS-UAE and WinUAE, so someone can create a "launch" program which works in both. You'd need to compile the host "dll" separately for all desired architectures (Windows_x86-64, Linux_x86-64, Linux_ARMv8, etc).
|
![]() |
![]() |
#7 |
Registered User
Join Date: Oct 2021
Location: England
Posts: 1,330
|
ah ok, cheers for the info.
|
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2004
Location: Germany
Posts: 106
|
It's so cool to see this great emulator on the Raspi. Hopefully I can test it this evening.
What about the Arcade mode? Would be a pleasure to play my games from the couch and choose it from the cover flow view. |
![]() |
![]() |
#9 |
Registered User
Join Date: Oct 2021
Location: England
Posts: 1,330
|
I tried the Portable Mode option, out of interest, where do saved screenshots now appear? doesnt seem to be in the old position on my desktop.
|
![]() |
![]() |
#10 | |||
Registered User
Join Date: Mar 2013
Location: Leipzig/Germany
Posts: 472
|
Quote:
![]() Edit: to clarify... Running the binary you linked in this thread on rasberrry pi os 32bit. The Manjaro compiled I testet some weeks ago did in fact disable the backgroud/leds as far as I remember. From another Thread: Quote:
Quote:
FPS drop down to 38 in CE mode. Last edited by jbl007; 03 November 2021 at 19:24. |
|||
![]() |
![]() |
#11 | ||||
FS-UAE Developer
![]() Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
Quote:
Quote:
Quote:
![]() Quote:
![]() (P.S: Running with the performance overlay Alt+O is a very nice way to visualize the performance. Much better than the crappy overlay in FS-UAE 3 ![]() Last edited by FrodeSolheim; 03 November 2021 at 19:40. |
||||
![]() |
![]() |
#12 | |
Registered User
Join Date: Mar 2013
Location: Leipzig/Germany
Posts: 472
|
Quote:
![]() Now I got the launcher up and running. It's a bit fiddly to set it up but it works well. If someone is interested I could maybe write a script to to install the launcher+fs-uae |
|
![]() |
![]() |
#13 |
Registered User
Join Date: Nov 2016
Location: Skien / Norway
Posts: 112
|
JIT is not available, right?
|
![]() |
![]() |
#14 |
FS-UAE Developer
![]() Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
|
![]() |
![]() |
#15 |
Registered User
Join Date: Nov 2021
Location: England
Posts: 7
|
Excellent, will have to give this a try later.
|
![]() |
![]() |
#16 |
Registered User
Join Date: Dec 2021
Location: Wisconsin / United States
Posts: 4
|
Works well. I overclocked up to 2.1. Used A500 1.3 and loaded up Lemmings, Wings, EotB, and a few others and all worked fine.
TD Bauer URS Retro |
![]() |
![]() |
#17 |
Registered User
Join Date: Dec 2021
Location: Wisconsin / United States
Posts: 4
|
Still having issues with the CAPSImg file ad running IPF images.
I am showing the CAPSImg and the QEMU-UAE are coming up as detected in settings under the Program tab, but when I try to run IPF images the emulator tells me the needed files are not loaded. I placed both files in the Program folder, should they be in the Sytem folder? |
![]() |
![]() |
#18 | ||
Registered User
Join Date: Oct 2021
Location: England
Posts: 1,330
|
Quote:
part of the release notes for WinUAE 3.5.0 states Quote:
If the winlaunch.lib side of things can be sorted/built in like WinUAE managed then we have an already useful/functioning feature, i dont know what others are expecting, but just being able to launch say Firefox or VLC is more than enough, no deep integration/etc is required, just the simple command launch. tbh a functioning browser is 1 of few things classic systems need a major crutch like winlaunch to just use the host systems browser(s), id be happy with just that 1 plain ability. |
||
![]() |
![]() |
#19 |
Just loving the Amiga
Join Date: Jul 2022
Location: Carmarthen / Wales
Posts: 55
|
Raspberry pi to workbench
Can I start off by saying a big thanks to FrodeSolheim for the work
on FS-UAE. As far as emulators go in the linux world, it is the best. Add the fact that it can be used on arm64 with a raspberry-pi is amazing. And, yes, it works just great. I am using version 3.0.5 and I love it. So, as this is my first post here's a little bit about me. I owned an Amiga a1200 with an 80mb hard drive back in the early 1990's which I sold in about 2001. It was my first foray into computing and I am soooo sorry that I sold it. I had my first Windows PC in the late 1990's and I really wanted to open up the possibilities of what the internet had to offer, so funding towards the PC upgrades came from the sale of the Amiga. In all honesty, I hadn't done anything Amiga based until about two months ago. I had seen a video on Youtube about emulation and decided to make use of a raspberry pi 4b to look into it. Fortunately I have been using linux for the last 12 years so getting my head around the instal and usage was quite easy and the fact that raspbian/raspberryOS is built around the debian/ubuntu kernel was a bonus. I found all the software I needed online and soon discovered a plethora of bonuses including my favourite collection of LSD Docs and a great collection of games. So, to the point of this post. >>>>>> I wanted to see if I could relive the days of my old a1200 with it's 80mb harddrive booting straight into workbench, on my pi. I looked at youtube and many other emulation platforms but could find no info. I could find many that would emulate the Amiga and let you start many games from a simple interface using amiberry or FS-uae but nothing that would let me boot my raspberry pi straight into my good old Amiga workbench 3.1. I was quite disappointed, to say the least. So with my software and pi in hand I set myself the task of making it happen. I bought spare micro-sd cards and grabbed others where I could and got programming. The first problem I could see was that it was pointless to be able to boot into workbench but have no way of getting at the underlying operating system. It had to use emualtion as there is no way of building any Amiga on arm64 architecture without it. I could see the benefit of pimiga (a great piece of work by Chris Edwards) and I wanted to do the same thing but with a more "classic" amiga feel. After playing around with a few emulators I realised that the easiest and best to adopt was FS-uae. To cut a long story short I now have a raspberry pi 4b that will boot straight into my workbench 3.2. It took two weeks of playing about and configuring but it works. My pi boots into a populated debian desktop with controls to set it to boot into either an Amiga or back into raspberry-os. It looks like this: The FS_UAE launcher will open as usual but the START-AMIGA button will reboot the pi into my Amiga workbench using FS-uae as emulation. When I want to revert back to my pi for other work I just hit the RESET-PI button and I am back to my usual desktop on start-up. As FS-uae can have different configurations, I have a button to change between a simple A500 boot all the way up to an a4000 workbench. I just need to build the configurations first. I built the basic operating system on less than 5.6GB which can easily be written to any micro-SD card of at least 8GB. I spent time developing it to work flawlessly with any size card by adding the GParted tool to expand the partition on the card. So now I had built it, what could I do with it. I thought "all the software is free" I should make my version of this free too. So here it is: https://mega.nz/file/tuhRFKZL#r9BR6T...iF1qa03wYy074k It's a 1.58GB download and you can use the raspberry pi imager software to write it to any card of at least 8GB. There are no roms included, no software and no operating systems for the Amiga. But I guess that if you are reading this you have your own. There is a standard FS-UAE folder which you can add all your files to and get the system working in less that twenty minutes. The OS is raspberryOS and the user and password are "pi" and "raspberry". There is a basic set of instructions assuming that you already have some knowledge of using a raspberry pi. I could have written a full set of instructions on how to do this, but it would have taken longer than writing this and uploading the image while I do so. So if you are a pi user and a fan of the Amiga please download the image. There is nothing on there to harm you or your pi as it's all based around simple software with no nasties included. Write it to a minimum 8GB micro-sd and boot up your pi. Follow the instructions to add your roms and build a workbench, copy your FS-UAE config file as per instructions, click the CHANGE-AMIGA button and then the START-AMIGA button to see your workbench come to life when the pi reboots. When you are finished in your workbench just close it as usual using F12 to go back to the raspberry desktop. I suggest using the RESET-PI button before you do anything else as there may be some processes running that need to be stopped before you attempt any usual things on raspbian. I would really appreciate feedback, both good and bad, and any advice on how to make this better. My linux knowledge is pretty basic/fair and it took a while to get the programming right. If you need any help on this just PM me and I'll get back to you. The instructions are quite simple but you should have a good knowledge of using FS-uae and the pi before attempting this. Follow the instructions on setting your audio and resizing your card before you start, and test your configuration before you commit to it. Finally, if you use this, I hope you enjoy it as much as I do. To be able to just switch on a power button and see my old workbench pop up before me, is a joy. I hope to be able to use it for many years to come. Thanks again to FrodeSolheim and to everyone at eab and raspberry. wii Last edited by wiisoldier; 25 July 2022 at 03:16. |
![]() |
![]() |
#20 | |
Registered User
Join Date: Feb 2016
Location: London
Posts: 366
|
Quote:
![]() |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS-UAE 3.X on Raspberry Pi 3/4 | Lord | support.FS-UAE | 37 | 26 January 2022 13:29 |
How to update on raspberry pi | Welshieinnz | support.FS-UAE | 4 | 10 February 2020 18:41 |
Raspberry Pi 3 out | Retroplay | Retrogaming General Discussion | 63 | 11 March 2016 18:05 |
FS-UAE ARCADE with video preview? | paginein | support.FS-UAE | 1 | 22 December 2015 18:19 |
Raspberry Pi 2 | amigafreak68k | support.FS-UAE | 67 | 31 October 2015 22:52 |
|
|