![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2016
Location: Stoke-On-Trent, England
Posts: 450
|
Kipper2k CD32 Riser - RGB (DB23) and PC Keyboard (PS/2) Ideal for TF328
I have built a number of the Kipper V6.0 Riser boards ideal for use with you TF328!
They come fully populated with a PIC chip for the Keyboard interface and brand new DB23 connectors. The edge connectors and MiniDIN are TE Connectivity AMP brand. At the moment I have enough to build 8 with RGB (DB23) Prices for one including delivery and insured are as follows: UK £30 (Was £32) Europe £36 (Was £37) Canada / USA £37 (Was £38 ) Non tracked, sent at your risk! Europe £32 USA £33 For other locations and for example if you you to buy 3 or 5 etc I will calculate a cost. I will only except Paypal Gift as this is not a commercial product. Also it's your responsibility to ensure your TF328 or another product is insulted from the shielding inside your CD32! There may be a delay in you getting these boards if demand is faster than I can produce them. Last edited by kgc210; 13 January 2018 at 01:50. Reason: Price Reduction, Quantity update. |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2005
Location: Umeå
Age: 43
Posts: 934
|
Is it possible to order them with options, say like green pcb color to match the CD32 pcb and without PS/2-interface?
|
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2016
Location: Stoke-On-Trent, England
Posts: 450
|
Not at the moment sorry.
I ordered red PCB's to match the TF328. If I sell out I will consider preordering without components, but as it stands I have bought all of the components for this batch. |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2005
Location: Umeå
Age: 43
Posts: 934
|
Thanks for the info!
|
![]() |
![]() |
#5 |
Bit Copying Bard
![]() Join Date: Jan 2017
Location: Kelty, Fife, Scotland
Age: 41
Posts: 1,293
|
Arrived and looks grand - will be giving it a proper test tonight
![]() |
![]() |
![]() |
#6 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,466
|
Are these 100% compatible with TF328 when the PIC is programmed and fitted? I did read somewhere that there was some issues with the PIC firmware preventing boot on some risers?
It has the CF cut-out any photos of it all fitting together with the CF card mounted? |
![]() |
![]() |
#7 |
Bit Copying Bard
![]() Join Date: Jan 2017
Location: Kelty, Fife, Scotland
Age: 41
Posts: 1,293
|
As far as I know the 18 pin PIC on the Kipper2k design works great, it's the smaller pic used on some risers that cause the issue. I'll try and get some pics when I put it all together this weekend
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2016
Location: Stoke-On-Trent, England
Posts: 450
|
Thanks indigolemon.
This is how it sits with my TF328 ignore the tape on the TF328. I am selling the v6 board, like indigolemon mentions it uses the 18pin PIC which works as should be. It was the pre v6 ones that didn't work. |
![]() |
![]() |
#9 |
Registered User
Join Date: Jun 2016
Location: Stoke-On-Trent, England
Posts: 450
|
Just so you all know I have 12 riser boards left at the moment.
|
![]() |
![]() |
#10 |
Registered User
Join Date: Oct 2017
Location: Naestved
Posts: 48
|
I'll take one of those, can you PM me the payment link (incl. p&p to denmark) ?
PS: Are you selling complete TF328's too ? |
![]() |
![]() |
#11 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,408
|
Is that lower part top left wide enough to easily route a IDE cable out of the CD32?
|
![]() |
![]() |
#12 |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
|
![]() |
![]() |
#13 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,654
|
Yeah but will it work? The IDE is not buffered.
|
![]() |
![]() |
#14 |
Registered User
Join Date: Jun 2016
Location: Stoke-On-Trent, England
Posts: 450
|
You could also use an IDE - SD adaptor and one of them flexible extensions, then you wouldn't need to bring power out of the CD32.
|
![]() |
![]() |
#15 |
Registered User
Join Date: Sep 2017
Location: birmingham, uk
Posts: 548
|
@akira ive had success with a long ide cable .
|
![]() |
![]() |
#16 |
Registered User
Join Date: Jun 2016
Location: Stoke-On-Trent, England
Posts: 450
|
I am down to my last 6 riser boards now.
Although I do have another batch on their way. |
![]() |
![]() |
#17 |
Registered User
Join Date: Oct 2017
Location: Naestved
Posts: 48
|
I just received mine today, and very pleased with it
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Oct 2017
Location: Naestved
Posts: 48
|
Btw, could you direct me to a good RGB->HDMI combo of cable and upscaler box ?
|
![]() |
![]() |
#19 |
Registered User
Join Date: Jun 2016
Location: Stoke-On-Trent, England
Posts: 450
|
Updated first post with reduced pricing and untracked option with Euro / USA.
|
![]() |
![]() |
#20 |
Registered User
Join Date: Oct 2008
Location: Finland
Posts: 643
|
Interested in 2, do they come with the DB23 connectors?
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
and another CD32 Riser! | Bprepared | Hardware mods | 88 | 19 May 2021 17:04 |
CD32 Expansion Riser | solidcore | Hardware mods | 84 | 05 October 2017 15:33 |
Amiga 4000D boot Light Gray Stopped Display in DB23 RGB help ! | nandogames | support.Hardware | 1 | 03 February 2016 16:57 |
Is there anyone who mods CD32's for RGB? | missyrelm | support.Hardware | 14 | 23 September 2014 14:46 |
CD32 connection to RGB monitor | c0dehunter | support.Hardware | 4 | 22 June 2013 13:06 |
|
|