English Amiga Board


Go Back   English Amiga Board > Main > Amiga scene

 
 
Thread Tools
Old 15 September 2021, 17:19   #1
tekopaa
Registered User
tekopaa's Avatar
 
Join Date: Feb 2008
Location: Finland
Posts: 123
Amiga 500 metalic monitor stand

Hi

If someone is happy owner of

this A500 /A500+ monitor stand measurements of this or plans would be amazing.
I have friend working in company which makes cooler/ac unit cases from metalic so it would be easy to copy Amiga case too

So requesting measurements of this case
tekopaa is offline  
Old 15 September 2021, 18:11   #2
Samurai_Crow
Total Chaos forever!

Samurai_Crow's Avatar
 
Join Date: Aug 2007
Location: Waterville, MN, USA
Age: 47
Posts: 1,816
Is that a monitor stand or a Bodega Bay Zorro2 expansion?
Samurai_Crow is offline  
Old 15 September 2021, 19:33   #3
Photon
Moderator

Photon's Avatar
 
Join Date: Nov 2004
Location: Eksjö / Sweden
Posts: 5,156
With original feet, an A500 is 51mm tall and 366mm wide. The depth from the back to the "ridge" is 150mm. (See "overhang" in the photo).

Monitor width (and depth) varies. For the depth, you might want the spacing of the feet rather than the full depth, since the tube can protrude at the back without support from the surface the monitor stands on.

With these measurements, you can make an upside-down "U" in any material, from which a 150x51 (plus 2mm margin) is cut out on the floppy side.

This photo looks like an expansion, where part of the plastic case of the A500 must be cut off to fit it.
Photon is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted amiga a500 & a1200 monitor stand AmigaCD32CD MarketPlace 0 26 February 2020 21:10
1702 monitor, Amiga 500. MrSiggler support.Hardware 15 29 August 2015 10:04
Amiga 500's & Monitor Monkeyz MarketPlace 0 02 August 2013 00:07
Amiga 500+ to VGA monitor JonB support.Hardware 13 03 April 2013 18:21
Amiga 500 - can I use an Acorn monitor? porty support.Hardware 19 15 May 2010 19:02

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 10:20.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Page generated in 0.07366 seconds with 13 queries