07 July 2009, 22:30 | #1 |
Registered User
Join Date: Sep 2008
Location: Germany
Posts: 6
|
Schematics for Apollo 1240/1260
Hello, i have two Apollo Boards with the same failure. When i light bend the pcb the card works sometimes fine. Has everyone the schematics for the apollo 1240/1260 card? best regards GT76
|
08 July 2009, 00:10 | #3 |
I hate potatos and shirts
|
Probably just a problem of a bended pin on the accelerator's connector, check it and straight it and the board will work again.
|
08 July 2009, 00:25 | #4 |
PSPUAE DEV
|
|
08 July 2009, 00:48 | #5 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,464
|
JSchoenfeld.
|
08 July 2009, 10:18 | #6 |
Likes to be thought of as
|
I edited that post i dont have them. As for bending the card, i have had that problem, its usually the mach chip sockets and the chips, clean the socket. One time is has been dry a joint on the rom socket. It could be the main pcb connector.
Also, the jumpers for the clock can be a problem, make sure they are also clean and tight. Last edited by Dimlow; 08 July 2009 at 10:27. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Upgrading Apollo 1240 to 1260 a definitive How To Guide | Dimlow | Hardware mods | 397 | 06 August 2016 02:11 |
Apollo 1260 to a 1240 problems | Kitch | support.Hardware | 26 | 15 December 2012 07:17 |
[A1200] Apollo 1240/1260 and WHDLoad | 8bitbubsy | support.Hardware | 13 | 28 January 2010 23:41 |
Apollo 1240 to 1260 ROM file | 8bitbubsy | support.Hardware | 3 | 21 January 2010 04:23 |
FS: ACT Apollo 1240/1260 with 32MB Ram | Ex-Collector | MarketPlace | 14 | 19 October 2009 19:46 |
|
|