Hologon by The Electronic Knights WHDLoad - Page 2

Torti-the-Smurf · 20 March 2021, 19:27

I just tested the WHDload version and its glitched up on OCS/ECS Amiga´s

but works on AGA

I even tried it on WinUAE with Extreme 060 settings

The WHDLoad version runs flawless with AGA but gets super glitchy only by changing to Full ECS

Yes, i tried every Tooltype in the book nothing could change this.
Please

CFOU

Torti-the-Smurf · 20 March 2021, 19:56

Quote:

Originally Posted by thairacerjp

Thanks Master

, merci beaucoup.
EON could be whdload ?

TBL is working on the Final Version.

It will have BugFixes and runs native from Harddisc.

thairacerjp · 20 March 2021, 19:58

Quote:

Originally Posted by Torti-the-Smurf

TBL is working on the Final Version.

It will have BugFixes and runs native from Harddisc.

S weet

Torti-the-Smurf · 20 March 2021, 20:43

CFOU! will look at the problems with the WHDLoad.slave on OCS/ECS setups

Thank You so much CFOU!

nikosidis · 20 March 2021, 22:07

This install is buggy on Blizzard IV and Furia. Worse on Furia than Blizzard 030.
Running the ADF from Gotek it is no problem.

Superman · 20 March 2021, 22:08

Quote:

Originally Posted by Torti-the-Smurf

I just tested the WHDload version and its glitched up on OCS/ECS Amiga´s

but works on AGA

I even tried it on WinUAE with Extreme 060 settings

The WHDLoad version runs flawless with AGA but gets super glitchy only by changing to Full ECS

Yes, i tried every Tooltype in the book nothing could change this.
Please

CFOU

I noticed those same glitches on my A600 with Furia. Runs perfectly on my A1200 with ACA 1221 though.

CFou! · 21 March 2021, 00:57

Quote:

Originally Posted by Torti-the-Smurf

CFOU! will look at the problems with the WHDLoad.slave on OCS/ECS setups

Thank You so much CFOU!

fixed on 68000 and some another enhancement.

soon released

version 1.1 (21.03.2020) done by CFou!:
- QuitKey support for 68000 added
- crash on 68000 fixed (because by error 68010+ special code was forced)
- Fast memory used instead of absolute adress at $80000
(less chip memory needed)
- Tested with all 680xx CPU types (via WinUAE)

Amiga68k · 21 March 2021, 15:39

Quote:

Originally Posted by CFOU!

fixed on 68000 and some another enhancement.

Hi CFOU,

On 1260 I get an Exception:

Code:

************************* 21-Mar-21 15:30:14 ************************18.6.6128***
Slave='Hologon.slave' (460 bytes)
Resload   7BE81000 - 7BE8926C (  33388) at 7BE81000  GL=$7BE8B000
Slave     7BF7B000 - 7BF7B1A8 (    424) at 7BF7B000  BaseMemSize=$100000
attn=FF(60,82) fc=65535 kn=22519 cs=DC00 rw=0 zpt=-1 ep=0 ei=0
setcpu=33D(DC,IC,SCB,ECB,BNC)

Exception "Access Fault" ($4008) PC = $7A4C8 Long Write to $116FFC

$0007a4ac move.w       d1,d3
$0007a4ae move.l       d3,d0
$0007a4b0 move.l       d3,d1
$0007a4b2 move.l       d3,d4
$0007a4b4 move.l       d3,d5
$0007a4b6 move.l       d3,d6
$0007a4b8 move.l       d3,d7
$0007a4ba move.l       d3,a1
$0007a4bc move.l       d3,a2
$0007a4be move.l       d3,a3
$0007a4c0 move.l       d3,a4
$0007a4c2 move.l       d3,a5
$0007a4c4 move.l       d3,a6
$0007a4c6 subq.w       #1,d2
›1m$0007a4c8 movem.l      d0-d1/d3-d7/a1-a6,-(a0)        ;$00117000
›22m$0007a4cc movem.l      d0-d1/d3-d7/a1-a6,-(a0)        ;$00117000
$0007a4d0 movem.l      d0-d1/d3-d7/a1-a6,-(a0)        ;$00117000
$0007a4d4 movem.l      d0-d1/d3-d7/a1-a6,-(a0)        ;$00117000
$0007a4d8 movem.l      d0-d1/d3-d7/a1-a5,-(a0)        ;$00117000
$0007a4dc dbf          d2,$7a4c8
$0007a4e0 movem.l      (a7)+,d0/d4-d7/a2-a6           ;$0004a6b0
$0007a4e4 tst.w        d0
$0007a4e6 beq.b        $7a4f0
$0007a4e8 subq.w       #1,d0
$0007a4ea move.b       d1,-(a0)                       ;$00117000
$0007a4ec dbf          d0,$7a4ea
$0007a4f0 movem.l      (a7)+,d2-d3                    ;$0004a6b0
$0007a4f4 rts
$0007a4f6 movem.l      d4-d7/a3-a6,-(a7)              ;$0004a6b0

exception stackframe:
$0004A6B0 20000007 A4C84008 00116FFC 00850800
regular stack:
$0004A6C0 00000000 00000000 00001F12 00000000 00000024 00010348 00010358 00BFD100
$0004A6E0 00012CA8 00DFF000 00010000 00000200 00013418 0007AA8E 0007A5E8 00079806
$0004A700 2D963A17 1A080130 00060D95 00170000 24B00036 FFFF196B 01380DA2 0B3E0040
$0004A720 FFFF0EBD 0040FFFF 169E0040 FFFF0BB2 0040FFFF 080E0040 FFFF0282 0040FFFF
$0004A740 02820040 FFFF02A9 0040FFFF 02870040 FFFF152A 00400C4A 147D0040 0FAD1C00

  ----0---- ----1---- ----2---- ----3---- ----4---- ----5---- ----6---- ----7----
Dx 6B6B6B6B  6B6B6B6B        6F  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B
Ax   117000  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B

                 TTSM III   XNZVC
›1mPC=   7A4C8›22m  SR %0010000000000000  USP=FFC00  ›1mSSP=4A6B0›22m
VBR=7BE8C000  SFC=5  DFC=5  CACR=80008000  PCR=4300522  BUSCR=0
TC=8000  URP=7BF79E00  SRP=7BF79E00  DTT0=0  DTT1=0  ITT0=0  ITT1=0

         MEDRAAAABVCPSDT          YZ  PMRCBSDAAAA
intena=%›1m0110000000000100›22m dmacon=%›1m0000001111111111›22m adkcon=$1100
intreq=%›1m0000011111100000›22m
vposr....A300  vhposr...027B  joy0dat..0200  joy1dat..0000  clxdat...A1FF  
pot0dat..7C00  pot1dat..7C7C  potinp...5500  serdatr..3800  dskbytr..8000  
deniseid.00F8  hhposr...FF71  
   ciaa:     PI ROPS		   ciab:     PI ROPS
	cra=›1m00000000›22m  ta=21FF<21FF	   cra=›1m00000001›22m  ta= D41<4024
	    AII ROPS			    AII ROPS
	crb=›1m00000000›22m  tb=21FF<21FF	   crb=›1m00001000›22m  tb= 1F0< 1F0
	    10RTWCLO	  parallel	    DRCCDSOY      M3210HDS
	pra=›1m11111110›22m  prb=›1m11111111›22m      pra=›1m11111111›22m  prb=›1m11111001›22m
       ddra=›1m00000011›22m ddrb=›1m00000000›22m     ddra=›1m11000000›22m ddrb=›1m11111111›22m
       event=00202C  icr=00  sdr=00    event=2755CC  icr=00  sdr=00

Superman · 21 March 2021, 22:55

I just tried version 1.1 on its now perfectly fine on my A600 with furia but glitches on my A1200 now. The first version was fine on A1200 but not A600.

[ Show youtube player ]

CFou! · 22 March 2021, 00:51

Quote:

Originally Posted by Superman

I just tried version 1.1 on its now perfectly fine on my A600 with furia but glitches on my A1200 now. The first version was fine on A1200 but not A600.

[ Show youtube player ]

have you try with ExpCHip tooltype to compare?

I suppose it is caused by fast memory usage.

Can you confirme?

CFou! · 22 March 2021, 00:52

Quote:

Originally Posted by Amiga68k

Hi CFOU,

On 1260 I get an Exception:

Code:

************************* 21-Mar-21 15:30:14 ************************18.6.6128***
Slave='Hologon.slave' (460 bytes)
Resload   7BE81000 - 7BE8926C (  33388) at 7BE81000  GL=$7BE8B000
Slave     7BF7B000 - 7BF7B1A8 (    424) at 7BF7B000  BaseMemSize=$100000
attn=FF(60,82) fc=65535 kn=22519 cs=DC00 rw=0 zpt=-1 ep=0 ei=0
setcpu=33D(DC,IC,SCB,ECB,BNC)

Exception "Access Fault" ($4008) PC = $7A4C8 Long Write to $116FFC

$0007a4ac move.w       d1,d3
$0007a4ae move.l       d3,d0
$0007a4b0 move.l       d3,d1
$0007a4b2 move.l       d3,d4
$0007a4b4 move.l       d3,d5
$0007a4b6 move.l       d3,d6
$0007a4b8 move.l       d3,d7
$0007a4ba move.l       d3,a1
$0007a4bc move.l       d3,a2
$0007a4be move.l       d3,a3
$0007a4c0 move.l       d3,a4
$0007a4c2 move.l       d3,a5
$0007a4c4 move.l       d3,a6
$0007a4c6 subq.w       #1,d2
›1m$0007a4c8 movem.l      d0-d1/d3-d7/a1-a6,-(a0)        ;$00117000
›22m$0007a4cc movem.l      d0-d1/d3-d7/a1-a6,-(a0)        ;$00117000
$0007a4d0 movem.l      d0-d1/d3-d7/a1-a6,-(a0)        ;$00117000
$0007a4d4 movem.l      d0-d1/d3-d7/a1-a6,-(a0)        ;$00117000
$0007a4d8 movem.l      d0-d1/d3-d7/a1-a5,-(a0)        ;$00117000
$0007a4dc dbf          d2,$7a4c8
$0007a4e0 movem.l      (a7)+,d0/d4-d7/a2-a6           ;$0004a6b0
$0007a4e4 tst.w        d0
$0007a4e6 beq.b        $7a4f0
$0007a4e8 subq.w       #1,d0
$0007a4ea move.b       d1,-(a0)                       ;$00117000
$0007a4ec dbf          d0,$7a4ea
$0007a4f0 movem.l      (a7)+,d2-d3                    ;$0004a6b0
$0007a4f4 rts
$0007a4f6 movem.l      d4-d7/a3-a6,-(a7)              ;$0004a6b0

exception stackframe:
$0004A6B0 20000007 A4C84008 00116FFC 00850800
regular stack:
$0004A6C0 00000000 00000000 00001F12 00000000 00000024 00010348 00010358 00BFD100
$0004A6E0 00012CA8 00DFF000 00010000 00000200 00013418 0007AA8E 0007A5E8 00079806
$0004A700 2D963A17 1A080130 00060D95 00170000 24B00036 FFFF196B 01380DA2 0B3E0040
$0004A720 FFFF0EBD 0040FFFF 169E0040 FFFF0BB2 0040FFFF 080E0040 FFFF0282 0040FFFF
$0004A740 02820040 FFFF02A9 0040FFFF 02870040 FFFF152A 00400C4A 147D0040 0FAD1C00

  ----0---- ----1---- ----2---- ----3---- ----4---- ----5---- ----6---- ----7----
Dx 6B6B6B6B  6B6B6B6B        6F  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B
Ax   117000  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B  6B6B6B6B

                 TTSM III   XNZVC
›1mPC=   7A4C8›22m  SR %0010000000000000  USP=FFC00  ›1mSSP=4A6B0›22m
VBR=7BE8C000  SFC=5  DFC=5  CACR=80008000  PCR=4300522  BUSCR=0
TC=8000  URP=7BF79E00  SRP=7BF79E00  DTT0=0  DTT1=0  ITT0=0  ITT1=0

         MEDRAAAABVCPSDT          YZ  PMRCBSDAAAA
intena=%›1m0110000000000100›22m dmacon=%›1m0000001111111111›22m adkcon=$1100
intreq=%›1m0000011111100000›22m
vposr....A300  vhposr...027B  joy0dat..0200  joy1dat..0000  clxdat...A1FF  
pot0dat..7C00  pot1dat..7C7C  potinp...5500  serdatr..3800  dskbytr..8000  
deniseid.00F8  hhposr...FF71  
   ciaa:     PI ROPS		   ciab:     PI ROPS
	cra=›1m00000000›22m  ta=21FF<21FF	   cra=›1m00000001›22m  ta= D41<4024
	    AII ROPS			    AII ROPS
	crb=›1m00000000›22m  tb=21FF<21FF	   crb=›1m00001000›22m  tb= 1F0< 1F0
	    10RTWCLO	  parallel	    DRCCDSOY      M3210HDS
	pra=›1m11111110›22m  prb=›1m11111111›22m      pra=›1m11111111›22m  prb=›1m11111001›22m
       ddra=›1m00000011›22m ddrb=›1m00000000›22m     ddra=›1m11000000›22m ddrb=›1m11111111›22m
       event=00202C  icr=00  sdr=00    event=2755CC  icr=00  sdr=00

Il will test soon on my real blizzard 060
(tested only on winaue)

Have you same problem with v1.0?

nivam · 22 March 2021, 02:12

nvm

Amiga68k · 22 March 2021, 08:00

Quote:

Originally Posted by CFOU!

Have you same problem with v1.0?

My previous post was with 1.0 and 1.0 + ExpChip

- With 1.1, it throws an exception at the very start (details below)
- With 1.1 + ExpChip the screen glitches with red and has a lot of distortion after a while and afterwards turns black (music keeps playing, Quit key stops the music, but screen remains black)

Btw, I know it has been a shitty year, but it's 2021 in the meantime (history mentions 2020)

Code:

************************* 22-Mar-21 07:41:21 ************************18.6.6128***
Slave='Hologon.slave' (772 bytes)
Resload   7BDF0000 - 7BDF826C (  33388) at 7BDF0000  GL=$7BE8B000
Slave     7BF7B000 - 7BF7B2E0 (    736) at 7BF7B000  BaseMemSize=$80000
ExpMem    7BDFA000 - 7BE8A000 ( 589824) at 7BDFA000
attn=FF(60,82) fc=65535 kn=22519 cs=DC00 rw=0 zpt=-1 ep=0 ei=1
setcpu=33D(DC,IC,SCB,ECB,BNC)

Exception "Access Fault" ($4008) PC = $7BE01986 (ExpMem $7986) Byte
Read-Modify-Write on $7BDF0000 (Resload $0)

$7be01958 ori          #$b20,sr
$7be0195c move.b       -(a1),d7                       ;$7bdffffc
$7be0195e dc.w         $4e01
$7be01960 move.l       (a6)+,d0                       ;$00dff000
$7be01962 line-f       $fd00
$7be01964 andi.b       #??$fd,-(a0)                   ;$000051e4
$7be01968 ori.b        #??$1e,d4
$7be0196c line-f       $fd00
$7be0196e btst         #??$ae,-(a0)                   ;$000051e4
$7be01972 addq.b       #1,d3
$7be01974 addq.w       #4,d4
$7be01976 ori.b        #??$28,d0
$7be0197a cmp2.w       ($7be01c24,pc),d0
$7be01980 andi.l       #$25c023a,d0
$7be01986 andi.b       #??$fc,(a2)+                   ;$7bdf0000
$7be0198a bset         d0,-(a0)                       ;$000051e4
$7be0198c bset         d0,d5
$7be0198e bclr         d0,($194,a4)                   ;$00005196
$7be01992 dc.w         $017d
$7be01994 bchg         d0,($153,a0)                   ;$00005337
$7be01998 bchg         d0,d0
$7be0199a btst         d0,($11d,a6)                   ;$00dff11d
$7be0199e movep.w      ($fe,a5),d0                    ;$7be000fe
$7be019a2 movem.l      ($e200d600),d0-d1
$7be019aa and.b        d0,d5
$7be019ac cmp.b        d0,d7
$7be019ae cmp.b        d0,d2
$7be019b0 line-a       $aa00
$7be019b2 line-a       $a000

exception stackframe:
$0007FFF0 20007BE0 19864008 7BDF0000 01A50080

  ----0---- ----1---- ----2---- ----3---- ----4---- ----5---- ----6---- ----7----
Dx  240023A      4000         1  D3D3D300  D4D4D4D4  7BE00000         0  D7D7D7D7
Ax     51E4  7BDFFFFC  7BDF0000  7BE00000      5002  7BE00000    DFF000

                 TTSM III   XNZVC
PC=7BE01986  SR %0010000000000000  USP=7FC00  SSP=7FFF0
VBR=7BE8C000  SFC=5  DFC=5  CACR=80008000  PCR=4300522  BUSCR=0
TC=8000  URP=7BF79E00  SRP=7BF79E00  DTT0=0  DTT1=0  ITT0=0  ITT1=0

         MEDRAAAABVCPSDT          YZ  PMRCBSDAAAA
intena=%0000000000000000 dmacon=%0010000000000000 adkcon=$1100
intreq=%0000000000000000
vposr....A300  vhposr...0277  joy0dat..0002  joy1dat..0000  clxdat...8001  
pot0dat..7C00  pot1dat..7C7C  potinp...5500  serdatr..3800  dskbytr..8000  
deniseid.00F8  hhposr...FF6F  
   ciaa:     PI ROPS	   ciab:     PI ROPS
	cra=00000000  ta=21FF<21FF	   cra=00000000  ta=FFFF<FFFF
	    AII ROPS	    AII ROPS
	crb=00000000  tb=21FF<21FF	   crb=00000000  tb=FFFF<FFFF
	    10RTWCLO	  parallel	    DRCCDSOY      M3210HDS
	pra=11111100  prb=11111111      pra=11111111  prb=11111111
       ddra=00000011 ddrb=00000000     ddra=11000000 ddrb=11111111
       event=000005  icr=00  sdr=00    event=00061D  icr=00  sdr=00

CFou! · 22 March 2021, 13:54

Hi Guys,

Can you test new version please?
here
TEsted on 68000 & 68060 (winUAE=>no GFX seens v1.1a on a1200)

for 68060 NOCACHE tooltype needed (and perhaps NOMMU for some configuration)

There are 2 slave with and without fast memory can you test both to compare please?

CFou! · 22 March 2021, 17:03

Quote:

Originally Posted by thairacerjp

Thanks Master

, merci beaucoup.
EON could be whdload ?

yes when final version released, i will do it with pleasure

Amiga68k · 22 March 2021, 17:20

Bloody 060...

- With and without Startup-Sequence (so no mmu tables being built)
- With and without NoCache
- With and without NoMMU
- With and without Setpatch

There is one setting, the demo played all the way through here:
- No Startup-Sequence (3.1 ROM)
- Setpatch
- Hologon-fast.slave
- NoCache or Cache (doesn't make much difference)
- NoMMU
- PreLoad

Some red screens and glitches still seen and sometimes the music and video slows down in between effects...

CFou! · 22 March 2021, 18:03

Quote:

Originally Posted by Amiga68k

Some red screens and glitches still seen and sometimes the music and video slows down in between effects...

I have perhaps idea for music slow down (had you slow down with first v1.0)?

for the glitches, if I remember correctly in the readme of the authors of the demo, it is indicated that there are some known problems on certain configurations and in particular synchronization problems. I will check the read-me to confirm

Torti-the-Smurf · 22 March 2021, 18:25

Hi there, lovely people

Just tested the 1.1 Version on the Amiga600 Furia Setup.
It ran (almost) perfect. (It needs the CACHE Tooltype)

There was only one slight glitch in the Diamond/Star Sequence.
Two of the pointy Starpeaks do clip/flicker for maybe 1-2 seconds.

Other than that it was perfect. No Advanced or dropped frames.

Good job CFOU !

PS:

ohhh and by the way, do you think the ICON is BIG enough ?
this must be the biggest icon i had seen in my hole life

PPS: A picture of the Memory Speed benchmark from my Furia.
Its INSANE

That little beast, i love her

Torti-the-Smurf · 22 March 2021, 18:31

ohhh shi....... i just found version 1.1a

testing.....

So, my results are in

With the new 1.1a Slave i get this Red Screen permanent in the background (tooltypes wont matter)

With the Slave-"Fast" i get some super small Sound stutter a few times in the demo.

For Furia, 1.1 is still the best

almost perfect

CFou! · 22 March 2021, 18:44

Quote:

Originally Posted by Amiga68k

Bloody 060...

- With and without Startup-Sequence (so no mmu tables being built)
- With and without NoCache
- With and without NoMMU
- With and without Setpatch

There is one setting, the demo played all the way through here:
- No Startup-Sequence (3.1 ROM)
- Setpatch
- Hologon-fast.slave
- NoCache or Cache (doesn't make much difference)
- NoMMU
- PreLoad

Some red screens and glitches still seen and sometimes the music and video slows down in between effects...

for information:

you don't need to start without startup-sequence, with WHDLoad you must use WB (tested opn 3.1 & 3.9 with 060)

here official readme extract:
Frame drops and sync losses:
- A4000 with 68040/25
- A4000 with Warp Engine 68040/40
- A1200 with Blizzard 1260
- A1200 with Apollo 1260
- A2000: Some Zorro-II fastmem extensions claimed to be zero waitstate,
which wasn't always true. In case of problems, disable or remove the Zorro-II
memory expansion.

20 March 2021, 19:27	#21
Torti-the-Smurf Registered User Join Date: Dec 2018 Location: Earth Posts: 1,058	I just tested the WHDload version and its glitched up on OCS/ECS Amiga´s but works on AGA I even tried it on WinUAE with Extreme 060 settings The WHDLoad version runs flawless with AGA but gets super glitchy only by changing to Full ECS Yes, i tried every Tooltype in the book nothing could change this. Please CFOU Attached Thumbnails Last edited by Torti-the-Smurf; 20 March 2021 at 19:28. Reason: those pictures show the "BALL SEQUENCE" on OCS/ECS via the WHDload version, no problems when run from Floppy

20 March 2021, 22:07	#25
nikosidis Registered User Join Date: Jan 2020 Location: oslo/norway Posts: 1,607	This install is buggy on Blizzard IV and Furia. Worse on Furia than Blizzard 030. Running the ADF from Gotek it is no problem. Last edited by nikosidis; 20 March 2021 at 22:25.

22 March 2021, 02:12	#32
nivam Registered User Join Date: Nov 2020 Location: Greece Age: 50 Posts: 101	nvm Last edited by nivam; 22 March 2021 at 07:48.

22 March 2021, 18:25	#38
Torti-the-Smurf Registered User Join Date: Dec 2018 Location: Earth Posts: 1,058	Hi there, lovely people Just tested the 1.1 Version on the Amiga600 Furia Setup. It ran (almost) perfect. (It needs the CACHE Tooltype) There was only one slight glitch in the Diamond/Star Sequence. Two of the pointy Starpeaks do clip/flicker for maybe 1-2 seconds. Other than that it was perfect. No Advanced or dropped frames. Good job CFOU ! PS: ohhh and by the way, do you think the ICON is BIG enough ? this must be the biggest icon i had seen in my hole life PPS: A picture of the Memory Speed benchmark from my Furia. Its INSANE That little beast, i love her Attached Thumbnails

22 March 2021, 18:31	#39
Torti-the-Smurf Registered User Join Date: Dec 2018 Location: Earth Posts: 1,058	ohhh shi....... i just found version 1.1a testing..... So, my results are in With the new 1.1a Slave i get this Red Screen permanent in the background (tooltypes wont matter) With the Slave-"Fast" i get some super small Sound stutter a few times in the demo. For Furia, 1.1 is still the best almost perfect Attached Thumbnails Last edited by Torti-the-Smurf; 22 March 2021 at 18:47. Reason: Test Result

20 March 2021, 20:43	#24
Torti-the-Smurf Registered User Join Date: Dec 2018 Location: Earth Posts: 1,058	CFOU! will look at the problems with the WHDLoad.slave on OCS/ECS setups Thank You so much CFOU!

21 March 2021, 22:55	#29
Superman Super Member Join Date: Sep 2014 Location: Wakefield Age: 48 Posts: 1,334	I just tried version 1.1 on its now perfectly fine on my A600 with furia but glitches on my A1200 now. The first version was fine on A1200 but not A600. [ Show youtube player ]

22 March 2021, 17:20	#36
Amiga68k Registered User Join Date: Oct 2017 Location: Amsterdam Posts: 231	Bloody 060... - With and without Startup-Sequence (so no mmu tables being built) - With and without NoCache - With and without NoMMU - With and without Setpatch There is one setting, the demo played all the way through here: - No Startup-Sequence (3.1 ROM) - Setpatch - Hologon-fast.slave - NoCache or Cache (doesn't make much difference) - NoMMU - PreLoad Some red screens and glitches still seen and sometimes the music and video slows down in between effects...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
One on One from Electronic Arts	yorgos	request.Old Rare Games	15	08 December 2018 07:29
Dandelion by The Electronic Knights > WHDLoad version ?	Nibbler	support.Demos	0	02 September 2018 20:55
Electronic Teacher 5	brolly	request.Old Rare Games	2	26 March 2016 13:08
TEK - The Electronic Knights	Galahad/FLT	request.Demos	11	21 September 2011 20:05
One on One by Electronic Arts	boing_1000	request.Old Rare Games	35	24 August 2008 15:43