Installing AmigaOS4.1 on Winuae

methodman · 11 May 2017, 01:35

I I am trying to install Amigados4.1 and I am using Kyzysztof Radzikowski'sbook and everything is going fine until p.80 where I am not getting t a cannot create accelerator card for the CyberPPc so I set it to scsi which changes the RDB mode to Scsi 2 but after I add in the floppy boot and the CD rom drive it tells me it can't find the ppc accelerator card. What am I missing. Did I have to install QEmu as a separate download? Any help would be appreciated Thanks

methodman · 11 May 2017, 02:17

I went through and made several conditions but I am still getting a division by zero error The only thing I am unable to spot is where are the network checks and I hope the CD drive is working properly other than that the configuration seems to match.

Saghalie · 11 May 2017, 03:12

Can you post your UAE config?

methodman · 11 May 2017, 03:16

Thanks, OK I checked the rom and it was on the diagnostic so I changed it back to the 4000 Now I am getting an error loading Qemu plugin. How do I send you my config?

methodman · 11 May 2017, 03:18

Error continues PPC CPU was started but CPU emulation core plugin not found.

Saghalie · 11 May 2017, 04:28

Quote:

Originally Posted by methodman

How do I send you my config?

In the message box click on advanced. A window will open and if you scroll down you will see where to add an attachment.

methodman · 11 May 2017, 07:37

Here it is

Toni Wilen · 11 May 2017, 18:31

Config looks ok. ROM panel UAE ROM should be "indirect".

PPC plugin is separate download.

methodman · 11 May 2017, 20:08

Hi Toni thanks for a great job with this emulator. How is the Ralph-Schmidt PPC different from the QEMU? Do I need both of them for Winuae to work. I got the error after I changed the board to indirect.

methodman · 11 May 2017, 20:49

OK I got QEMU and installed it into Winuae/plugins and I am still getting an error that winuae can't find the QEMU

Snake79 · 11 May 2017, 21:22

Hi there. I have downloaded and tested config of yours and successfully booted my OS41FE U1 hdf/vhd (tested on WinUAE 3.4.0 and 3.4.1b8). I had to change Settings/ROM/Board type: to New UAE (128k, ROM, INDIRECT as Toni said) and add hard disk image of mine. I have qemu-uae.dll and qemu-uae_x64.dll in plugins dir. Everything is working fine.

methodman · 12 May 2017, 01:32

I will try again tomorrow. I couldn't get it to run without an error. I'll rebuild the config I am using Windows 10 on an AMD machine That wouldn't matter would it?

Snake79 · 12 May 2017, 23:31

Quote:

Originally Posted by methodman

I will try again tomorrow. I couldn't get it to run without an error. I'll rebuild the config I am using Windows 10 on an AMD machine That wouldn't matter would it?

I'm using Windows 10 too (creators update), on Intel I5, but i think the cpu doesn't matter in problem of yours... Keep trying

11 May 2017, 01:35	#1
methodman Registered User Join Date: May 2010 Location: Redding USA Posts: 135	Installing AmigaOS4.1 on Winuae I I am trying to install Amigados4.1 and I am using Kyzysztof Radzikowski'sbook and everything is going fine until p.80 where I am not getting t a cannot create accelerator card for the CyberPPc so I set it to scsi which changes the RDB mode to Scsi 2 but after I add in the floppy boot and the CD rom drive it tells me it can't find the ppc accelerator card. What am I missing. Did I have to install QEmu as a separate download? Any help would be appreciated Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wifi on winuae and Amigaos4.1	aszu	support.FS-UAE	1	04 December 2015 15:38
Installing 3.9 under WinUAE issues	britain4	support.WinUAE	0	16 August 2014 17:34
Help installing WB 1.3 on HD! (WinUAE)	W4r3DeV1L	support.WinUAE	6	12 June 2008 20:59
Installing HD in WinUAE along with other programs...	Kodoichi	support.Apps	6	16 February 2002 17:15
Which WinUAE version for installing a HD?	Kodoichi	support.WinUAE	6	11 February 2002 11:48

11 May 2017, 02:17	#2
methodman Registered User Join Date: May 2010 Location: Redding USA Posts: 135	I went through and made several conditions but I am still getting a division by zero error The only thing I am unable to spot is where are the network checks and I hope the CD drive is working properly other than that the configuration seems to match.

11 May 2017, 03:12	#3
Saghalie Registered User Join Date: Nov 2014 Location: FT Lewis, WA Posts: 374	Can you post your UAE config?

11 May 2017, 03:16	#4
methodman Registered User Join Date: May 2010 Location: Redding USA Posts: 135	Thanks, OK I checked the rom and it was on the diagnostic so I changed it back to the 4000 Now I am getting an error loading Qemu plugin. How do I send you my config?

11 May 2017, 03:18	#5
methodman Registered User Join Date: May 2010 Location: Redding USA Posts: 135	Error continues PPC CPU was started but CPU emulation core plugin not found.

11 May 2017, 18:31	#8
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,505	Config looks ok. ROM panel UAE ROM should be "indirect". PPC plugin is separate download.

11 May 2017, 20:08	#9
methodman Registered User Join Date: May 2010 Location: Redding USA Posts: 135	Hi Toni thanks for a great job with this emulator. How is the Ralph-Schmidt PPC different from the QEMU? Do I need both of them for Winuae to work. I got the error after I changed the board to indirect.

11 May 2017, 20:49	#10
methodman Registered User Join Date: May 2010 Location: Redding USA Posts: 135	OK I got QEMU and installed it into Winuae/plugins and I am still getting an error that winuae can't find the QEMU

11 May 2017, 21:22	#11
Snake79 Registered User Join Date: Feb 2014 Location: Poland Posts: 190	Hi there. I have downloaded and tested config of yours and successfully booted my OS41FE U1 hdf/vhd (tested on WinUAE 3.4.0 and 3.4.1b8). I had to change Settings/ROM/Board type: to New UAE (128k, ROM, INDIRECT as Toni said) and add hard disk image of mine. I have qemu-uae.dll and qemu-uae_x64.dll in plugins dir. Everything is working fine.

12 May 2017, 01:32	#12
methodman Registered User Join Date: May 2010 Location: Redding USA Posts: 135	I will try again tomorrow. I couldn't get it to run without an error. I'll rebuild the config I am using Windows 10 on an AMD machine That wouldn't matter would it?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)