25 May 2022, 19:51 | #1 |
Registered User
Join Date: Dec 2016
Location: Finland
Posts: 76
|
IDE-CD automount
I have Amigakit 4xIde and idefix97 installed and the cd drive is working but it won't mount automatically when i insert CD.
Any suggestions? |
25 May 2022, 20:20 | #2 |
Registered User
Join Date: Oct 2009
Location: Germany
Posts: 3,303
|
What about "Devs:DosDrivers/"?
|
25 May 2022, 20:28 | #3 |
Registered User
Join Date: Dec 2016
Location: Finland
Posts: 76
|
|
25 May 2022, 20:30 | #4 |
Registered User
Join Date: Oct 2012
Location: Krypton
Posts: 1,210
|
Just shove it in the WBstartup drawer then it will mount on boot
|
25 May 2022, 20:37 | #5 |
Registered User
Join Date: Dec 2016
Location: Finland
Posts: 76
|
|
25 May 2022, 20:44 | #6 |
Registered User
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 6,334
|
Well, that will work around the problem, but it shouldn't be needed. DOSDrivers located in DEVS/DOSDrivers should be mounted automatically on boot, and if that's not happening it points at something being amiss with your startup-sequence. Are you sure it was in DEVS/DOSDrivers and not Storage/DOSDrivers?
|
25 May 2022, 20:51 | #7 |
Registered User
Join Date: Oct 2012
Location: Krypton
Posts: 1,210
|
Yeah I just gave him a quick and dirty solution but he needs to check that in the Icon info that in the `Default Tool` that the command C:MOUNT is present and that should sort it and he can leave it in Devs:
Last edited by supaduper; 25 May 2022 at 20:58. |
26 May 2022, 18:11 | #8 | |
Registered User
Join Date: Dec 2016
Location: Finland
Posts: 76
|
Quote:
|
|
26 May 2022, 18:20 | #9 | |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
Quote:
In any case you can also add the command in the User-startup, this: Mount CD2: |
|
26 May 2022, 21:51 | #10 |
Registered User
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 6,334
|
The default tool setting isn't needed when it's in DEVS/DOSDrivers because Mount is explicitly called during boot, though the setting *is* needed when it's in WBStartup or for double-clicking it (which appears to work, so the setting is correct anyway). It sounds like the Mount line in the standard Startup-Sequence is missing or somehow otherwise ineffective.
|
28 May 2022, 01:25 | #11 | |
Registered User
Join Date: Dec 2016
Location: Finland
Posts: 76
|
Quote:
Code:
;BEGIN IDEfix If Exists C:IDEfix ; You may want to exchange the following line with LoadIDE reset quiet ; to make IDEfix reset resident, or LoadIDE start quiet ; to start IDEfix immediately and have it reset resident ; from the next reboot. Make sure to put LoadIDE behind any Kickstart mappers! C:IDEfix EndIf ;END IDEfix ; $VER: Startup-Sequence_HardDrive 40.2 (25.2.93) ; Startup-Sequence for hard drive systems C:SetPatch QUIET C:Version >NIL: C:AddBuffers >NIL: DF0: 15 FailAt 21 C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ Resident >NIL: C:Assign PURE Resident >NIL: C:Execute PURE Assign >NIL: ENV: RAM:ENV Assign >NIL: T: RAM:T Assign >NIL: CLIPS: RAM:Clipboards Assign >NIL: REXX: S: Assign >NIL: PRINTERS: DEVS:Printers Assign >NIL: KEYMAPS: DEVS:Keymaps Assign >NIL: LOCALE: SYS:Locale Assign >NIL: LIBS: SYS:Classes ADD Assign >NIL: HELP: LOCALE:Help DEFER ; ## AmigaKit 4xIDE adapter IF EXISTS c:Load4xIDEPrefs c:Load4xIDEPrefs QUIET EndIF BindDrivers C:Mount >NIL: DEVS:DOSDrivers/~(#?.info) IF EXISTS DEVS:Monitors IF EXISTS DEVS:Monitors/VGAOnly DEVS:Monitors/VGAOnly EndIF C:List >NIL: DEVS:Monitors/~(#?.info|VGAOnly) TO T:M LFORMAT "DEVS:Monitors/%s" Execute T:M C:Delete >NIL: T:M EndIF SetEnv Language "english" SetEnv Workbench $Workbench SetEnv Kickstart $Kickstart UnSet Workbench UnSet Kickstart C:AddDataTypes REFRESH QUIET C:IPrefs Work:FullPalette/FPPrefs C:ConClip Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities IF EXISTS S:User-Startup Execute S:User-Startup EndIF Resident Execute REMOVE Resident Assign REMOVE C:LoadWB EndCLI >NIL: CI |
|
28 May 2022, 13:46 | #12 |
Registered User
Join Date: Dec 2016
Location: Finland
Posts: 76
|
|
28 May 2022, 14:48 | #13 |
Registered User
Join Date: Oct 2009
Location: Germany
Posts: 3,303
|
I would check if IDEfix and Load4xIDEPrefs have to work this way or not. Is both needed or do they conflict?
The mound line seems to be ok. However, you can add "set echo on" on top of your S-S to see if something strange happens. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WinUAE: Problem CDFS AutoMount | AMIGASYSTEM | support.WinUAE | 33 | 23 July 2020 11:42 |
Automount SCSI Zip drive | MikeA3000 | support.Hardware | 3 | 15 December 2018 04:24 |
CDFS automount and .backdrop | AMIGASYSTEM | support.WinUAE | 5 | 06 October 2018 20:39 |
Mounting volumes not set to automount on boot. | Amiga1992 | support.Hardware | 32 | 28 September 2017 00:05 |
SCSI-IDE bridge + IDE to CF adapter - How can I make a backup? | Tuffy | New to Emulation or Amiga scene | 2 | 02 April 2008 21:14 |
|
|