03 May 2021, 10:21 | #1 |
Registered User
Join Date: Jan 2017
Location: France
Posts: 102
|
FB 357A slow read with DD floppies
Hi,
is the FB 357A slow too when working with DD floppies ? i mean, the motor speed is good, you can see the difference between DD and HD, but despite the fact the motor run at 300 rpm, when scanning content of floppy... it's slow as with HD floppy. is that normal for this particular model, or is it an issue ? i noticied that, because i get a "joblot" of floppy drives recently, and they're all near twice as fast when scanning content. and they're all DD only. this 357A is the original drive of my 3000. thanks. |
03 May 2021, 10:23 | #2 |
ex. demoscener "Bigmama"
Join Date: Jun 2012
Location: Fyn / Denmark
Posts: 1,624
|
You mean head stepping? There's no feedback on that, so as long as it works, it is fast enough, and making it faster doesn't make any difference as the OS uses a fixed delay between steps.
If it "scans" across the disk more than other drives (using the same disk), there may be an issue causing read errors so it has to retry - that will of course make it slower. |
03 May 2021, 10:47 | #3 |
Registered User
Join Date: Jan 2017
Location: France
Posts: 102
|
yes, i mean head stepping. really far slower than others drives i have.
i'm also sure of his head alignement. but he seems to act like if it work with HD floppy. |
03 May 2021, 22:26 | #4 |
Registered User
Join Date: Apr 2010
Location: Italy
Posts: 1,136
|
verify the sensor of hd
|
03 May 2021, 23:02 | #5 |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,715
|
Use Amiga Test Kit to check the disk signals and to perform read and alignment tests on it.
|
04 May 2021, 09:27 | #6 |
Registered User
Join Date: Jan 2017
Location: France
Posts: 102
|
i forgot to mention, it was with fat formatted floppies. i redo testing with ffs/ofs formatted floppies, and it work normally.
that's a bit weird, as others are faster with fat. the HD switch work as expected, and i'm sure of head alignement. but i'll try with amiga test kit, i didn't know it... let's see |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chinon FZ-357A 150rpm slow down mechanism? | pipper | support.Hardware | 15 | 04 March 2020 11:51 |
I can only read floppies formatted by the machine | StarQuake | support.Hardware | 2 | 29 July 2016 23:20 |
im having problems getting workbench to read 1.44 formatted floppies | ed777 | support.WinUAE | 13 | 02 July 2016 15:36 |
Easiest way to read HD floppies on A500? | Starglider 2 | support.Hardware | 45 | 22 July 2015 16:15 |
Wanted: Chinon FB-357A or FZ-357A HD Floppy Disk Drive (high-density) | Starglider 2 | request.Other | 2 | 25 May 2015 21:18 |
|
|