Problematic Demos. - Page 4

amilo3438 · 17 September 2013, 01:57

Subtle shades by Nuance -> http://www.pouet.net/prod.php?which=7671

This one seems to work correct only with KS 3.1 ... similar to Aluminium demo. Otherwise glitches badly (see attachment).

Toni Wilen · 17 September 2013, 07:03

Quote:

Originally Posted by amilo3438

Just for info... subtle shades by Nuance -> http://www.pouet.net/prod.php?which=7671

It is ECS only, OCS Agnus = corruption. (Use search)

EDIT: Logo corruption is due to old memory contents or something.

amilo3438 · 17 September 2013, 10:29

Quote:

Originally Posted by Toni Wilen

It is ECS only, OCS Agnus = corruption.

Well, not quite...subtle shades by Nuance in WinUAEb7 works also on OCS 0.5mb+0.5mb with KS3.1 too.

On KS1.3 works with Full ECS & 1mb chip ram only.

StingRay · 17 September 2013, 10:42

See Toni's post about Subtle Shades.

amilo3438 · 17 September 2013, 11:18

Quote:

Originally Posted by StingRay

See Toni's post about Subtle Shades.

Thanks for the link.
Its wired as have just tested it again to work fine on OCS too but with KS3.1?!

EDIT: But the "Face " part will be corrupted. So it is ECS only.

Toni Wilen · 17 September 2013, 11:26

Quote:

Originally Posted by amilo3438

Thanks for the link.
Its wired as have just tested it again to work fine on OCS too but with KS3.1?!

"Face" part? Are you really sure you have OCS (perhaps you set 1M chip + OCS which automatically becomes ECS because you can't have OCS with 1M chip)

amilo3438 · 17 September 2013, 11:35

Quote:

Originally Posted by Toni Wilen

"Face" part? Are you really sure you have OCS (perhaps you set 1M chip + OCS which automatically becomes ECS because you can't have OCS with 1M chip)

Well, youre probably right ... testing it again now twice got the "Face" part corrupted with KS3.1 ... so it is then ECS only. Sorry, my mistake.

EDIT: Dont know what happen, cant repeat it again ... but it seems it doesnt work also if OCS+1mb chip is set.

Toni Wilen · 17 September 2013, 17:31

Quote:

Originally Posted by amilo3438

Made In Croatia by Binary -> http://janeway.exotica.org.uk/release.php?id=9158

This one looks very similar to Prurient (off-by-one bug) problem, thus might happen that is already fixed?!
But anyway, that will need to be checked to be 100% sure.

Yes, same thing, already fixed.

amilo3438 · 17 September 2013, 22:13

5o2 by Fairlight -> http://www.pouet.net/prod.php?which=59460

Problem with scrolling text (see pic.1) (already discussed on pouet ... see above link).
Tested on WinUAE b7, QS A500 (most common).

Does it works on a real A500 ?!

p.s. I have got a little wired situation here ...
F12 and changing to KS3.1, Reset button and it worked fine (see pic.2)...
F12 returning back to KS1.3, Reset button and it runs also fine too now?!

I am totally confused as it runs now fine with KS1.3 all time and cant get it back to run with a text problem as is shown on attached pic.1 ?!

EDIT: I have even restarted Laptop to see if that might change something and this did nothing as still got demo running fine.
Now the question is only what is happening on a real A500?!

EDIT2: Have just recalled one text about ST machines link ... Does the Wake-up-state maybe also exist on an Amiga?

mc6809e · 18 September 2013, 01:27

Quote:

Originally Posted by amilo3438

EDIT2: Have just recalled one text about ST machines link ... Does the Wake-up-state maybe also exist on an Amiga?

Nothing like that happens on the Amiga. The Amiga was designed to be very predictable.

Toni Wilen · 18 September 2013, 08:00

Quote:

Originally Posted by amilo3438

For info ... 5o2 by Fairlight -> http://www.pouet.net/prod.php?which=59460

Problem with scrolling text (see pic.1) (already discussed on pouet ... see above link).

Not interested, it is already confirmed broken in above link

There are few options that can cause pseudo-random behavior:

- ram config
- ks version
- number of floppy drives
- any expansions
- disk inserted when powering on vs inserting after insert disk hand is shown

Real random behavior on real hardware:

- rotation rate of floppy drive used to write the disk
- rotation rate of floppy drive used to read the disk
- motor rotation position when booting the Amiga

Normally it makes no difference but it is possible if some timing is very critical.

btw, do not change config on the fly, it is not always same as quitting and starting again. Especially if you do something that can't be done on real hardware.

amilo3438 · 18 September 2013, 12:27

Trashcan by Wizzcat -> http://janeway.exotica.org.uk/release.php?id=5750

DMS file (see pic.1) -> http://ftp.amigascne.org/pub/amiga/G...-Trashcan1.DMS

ADF file (see pic.2) -> http://cyberpingui.free.fr/dl.php?id=201

How should look according to 1st link above (see pic.3).

EDIT: Have even checked a file from -> http://www.arabuusimiehet.com/break/...ls.php?id=8477
that suppose should be an correct (tested to working) version, but unfortunately got same result as shown on pic.1 !?

Well, for sure this will require on real Amiga testing to be sure what is going on here.

EDIT2: Have just found an working version on Planet Emu -> link (see pic.4).

amilo3438 · 18 September 2013, 13:07

Tales Of A Dream by Dreamdealers -> http://janeway.exotica.org.uk/release.php?id=67

heavy · 18 September 2013, 13:36

for Trashcan/Wizzcat, if I remember well, I always saw the pic.2 with my version on real A500. due to a bad copy.
6 adf versions exists. the [a4] version works. see in the zone

same thing with Project Megaran/Reality : second pic is corrupted, but if you rip it with AR, you can realign bitplan correctly (but the bottom of the pic is corrupted)
and also Deform/Deformations : the end part sample is corrupted. I think it's due to the use of the track 81, not copied most of the time

amilo3438 · 18 September 2013, 14:09

Shave Off Your Moustache by The os -> http://www.pouet.net/prod.php?which=14119

A500 OCS/ECS 0.5+0.5 ... cant get last scrolling text to run at all!

p.s. Could be a bad disk maybe! This will need a real A500 testing.

EDIT: Found an working ADF version on Planet Emu -> link (see on attached pic.)

Quote:

Originally Posted by heavy

for Trashcan/Wizzcat, if I remember well, I always saw the pic.2 with my version on real A500. due to a bad copy.
6 adf versions exists. the first version I found works. see in the zone

Well, does that "working version" should be then same as pic.2 or pic.3 ?

heavy · 18 September 2013, 14:25

Quote:

Originally Posted by amilo3438

Well, does that "working version" should be then same as pic.2 or pic.3 ?

pic.3
and the end part, after vertical scrolltext, works (no guru)

use version [a4]

amilo3438 · 18 September 2013, 14:42

Quote:

Originally Posted by heavy

for Trashcan/Wizzcat,
6 adf versions exists. the [a4] version works. see in the zone

Sorry, never used it before ... is this correct link to "TheZone" -> <snip - prowler>

What is the working file full name?!

heavy · 18 September 2013, 14:49

can you use this link ? <snip - prowler>

amilo3438 · 18 September 2013, 15:09

Quote:

Originally Posted by heavy

can you use this link ? <snip - prowler>

Thanks for your help ... after some google-ing I have also found an working version -> see EDIT2 on http://eab.abime.net/911671-post70.html

Toni Wilen · 18 September 2013, 15:48

Quote:

Originally Posted by amilo3438

Tales Of A Dream by Dreamdealers -> http://janeway.exotica.org.uk/release.php?id=67

Usual bad copper wait. There are hundreds of those.

17 September 2013, 01:57	#61
amilo3438 Amiga 500 User Join Date: Jun 2013 Location: EU Posts: 1,501	Subtle shades by Nuance -> http://www.pouet.net/prod.php?which=7671 This one seems to work correct only with KS 3.1 ... similar to Aluminium demo. Otherwise glitches badly (see attachment). Attached Thumbnails Last edited by amilo3438; 17 September 2013 at 10:45. Reason: Removed "Just for info..."

17 September 2013, 22:13	#69
amilo3438 Amiga 500 User Join Date: Jun 2013 Location: EU Posts: 1,501	5o2 by Fairlight -> http://www.pouet.net/prod.php?which=59460 Problem with scrolling text (see pic.1) (already discussed on pouet ... see above link). Tested on WinUAE b7, QS A500 (most common). Does it works on a real A500 ?! p.s. I have got a little wired situation here ... F12 and changing to KS3.1, Reset button and it worked fine (see pic.2)... F12 returning back to KS1.3, Reset button and it runs also fine too now?! I am totally confused as it runs now fine with KS1.3 all time and cant get it back to run with a text problem as is shown on attached pic.1 ?! EDIT: I have even restarted Laptop to see if that might change something and this did nothing as still got demo running fine. Now the question is only what is happening on a real A500?! EDIT2: Have just recalled one text about ST machines link ... Does the Wake-up-state maybe also exist on an Amiga? Attached Thumbnails Last edited by amilo3438; 18 September 2013 at 13:20. Reason: Removed "For info ..."

18 September 2013, 12:27	#72
amilo3438 Amiga 500 User Join Date: Jun 2013 Location: EU Posts: 1,501	Trashcan by Wizzcat -> http://janeway.exotica.org.uk/release.php?id=5750 DMS file (see pic.1) -> http://ftp.amigascne.org/pub/amiga/G...-Trashcan1.DMS ADF file (see pic.2) -> http://cyberpingui.free.fr/dl.php?id=201 How should look according to 1st link above (see pic.3). EDIT: Have even checked a file from -> http://www.arabuusimiehet.com/break/...ls.php?id=8477 that suppose should be an correct (tested to working) version, but unfortunately got same result as shown on pic.1 !? Well, for sure this will require on real Amiga testing to be sure what is going on here. EDIT2: Have just found an working version on Planet Emu -> link (see pic.4). Attached Thumbnails Last edited by amilo3438; 18 September 2013 at 15:34. Reason: Removed "For info..."

18 September 2013, 13:07	#73
amilo3438 Amiga 500 User Join Date: Jun 2013 Location: EU Posts: 1,501	Tales Of A Dream by Dreamdealers -> http://janeway.exotica.org.uk/release.php?id=67 Attached Thumbnails Last edited by amilo3438; 18 September 2013 at 13:21. Reason: Removed "For info..."

18 September 2013, 13:36	#74
heavy noodle Join Date: Jun 2007 Location: europe Posts: 247	for Trashcan/Wizzcat, if I remember well, I always saw the pic.2 with my version on real A500. due to a bad copy. 6 adf versions exists. the [a4] version works. see in the zone same thing with Project Megaran/Reality : second pic is corrupted, but if you rip it with AR, you can realign bitplan correctly (but the bottom of the pic is corrupted) and also Deform/Deformations : the end part sample is corrupted. I think it's due to the use of the track 81, not copied most of the time Last edited by heavy; 18 September 2013 at 14:17.

17 September 2013, 10:42	#64
StingRay move.l #$c0ff33,throat Join Date: Dec 2005 Location: Berlin/Joymoney Posts: 6,863	See Toni's post about Subtle Shades.

18 September 2013, 14:49	#78
heavy noodle Join Date: Jun 2007 Location: europe Posts: 247	can you use this link ? <snip - prowler> Last edited by prowler; 18 September 2013 at 22:41. Reason: No direct links to The Zone, please.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problematic GVP A530 Turbo	Mogsy	support.Hardware	22	13 November 2012 19:12
Problematic thread?	prowler	project.EAB	5	28 October 2011 00:06
Problematic Holiday Lemmings 94 demo disk	MethodGit	support.Games	19	08 November 2010 03:56
Problematic slaves list	keropi	project.Killergorilla's WHD packs	44	28 November 2008 12:46
Looking for two demos...	eternalcrusader	request.Demos	3	01 August 2006 08:57