For Sale - A1200 & A600 Buffered IDE Interfaces

[Kin Hell]

This sale is prompted from being involved on this thread RE ehide.device for the TF1230/60 cards

These buffered interfaces will allow you to run longer cables & Master/Slave combos.

Both have had very little use & are immaculate in every manner.

https://amigastore.eu/en/882-25-buff...nterface-.html <---- Type A £15.00 + P&P

https://amigastore.eu/en/891-a120060...-buffered.html <---- £23.00 + P&P

Both are suitable for the A1200 & A600 & the one with built in CF Adapter (£23.00) fits on the TF1230/60. This is Mk2 of the card with the Master/Slave jumper flat to the card to clear the keyboard. The earlier model fouled.
Put the Master inside on the integrated CF slot & run a cable to the rear Expansion port or side of your case. - I can't offer any cable & rear port for this buffered interface.
It also is modded to stop half glow LED's which plague so many different brands of media.

The cheaper one (£15.00) functions perfectly when sat on top of the A1200/600 44pin IDC Header & again will run Master/Slave combos.

To compliment the cheaper version:

https://amigakit.amiga.store/a1200-c...er-p-1216.html <---- Gloss Black back plate & cable to get from std A1200/600 IDC Header to expansion Port. This is not a cheap 3D Printed affair & it's a really snug fit when pressed home. It still has the adhesive pad on the bottom side. - Comes with an extra internal IDC header near to the motherboards 44 pin header so you can run Master/Slave combo's if required.

£12.00 + P&P or just £12.00 if bought with the £15.00 interface & then add P&P.

P&P will depend exactly where you are in the world.

Both were bought in March 2023 & still have two years warranty on them.

Thanks for looking.

[Kin Hell]

I have interest in the £23.00 adapter already....

....Sold to Supaduper pending payment....

....Thank you. - In the Post.