ClassicWB GAAE

sjakie43 · 12 December 2009, 15:36

Hi again,

I want to install this Classicwb on my amiga 500.

I have my DH0 and i have the content of the HDF.
I have copied the contents of the hdf to DH0.

Boots up and....Couldnt load L:tooldaemon-handler?

It also cannot open whdload tool?

I did it exact the same way as my Amiga 1200(classicWBlite)
and that one is bootingand has NO probs?

What have i done wrong?

Sjakie43

sjakie43 · 12 December 2009, 15:43

I also noticed that on my DH0 i have 25mb in use,
but the hdf has 28mb in use,i copied everything so what is wrong?

I must have forgotten something....

Sjakie43

Bloodwych · 12 December 2009, 15:46

Not sure. If it's working from the HDF in WinUAE, it should be working on DH0: from the real Amiga.

Did you use Dopus to copy everything over from with WinUAE?

How did you copy the files over?

sjakie43 · 12 December 2009, 15:48

The same way as with my amiga 1200(classicwbLite).

Just drag and drop

sjakie43 · 12 December 2009, 15:50

I have double checked the contents of the Hdf and the DH0 folder.

Its strange that theres a 3mb difference in use though...

sjakie43 · 12 December 2009, 15:52

Its strange cause when i did the Amiga 1200 there was no difference
in Hd space use.

Boggling.....

Bloodwych · 12 December 2009, 15:53

I would try opening Dopus, select all the HDF ClassicWB files in one window and copy them to the root of your real Amiga hard drive in the other.

The difference may be down to you not selecting hidden files and folders.

sjakie43 · 12 December 2009, 15:55

I have to take a shower,,,,,

I will try it in an hour or so....

Thanx for the advice, i will try Dopus.

Sjakie43

Bloodwych · 12 December 2009, 15:57

Ok, no problem.

To see what I mean, run the ClassicWB GAAE HDF, open the main System drawer and go to the menu "window->show->all files".

It looks like you failed to drag those drawers over. In the GAAE, some drawers are hidden compared to the LITE.

sjakie43 · 12 December 2009, 17:22

YES, it works now!

So i dont have to re check the ClassicWBLite for hidden files?

Thanx Bloodwych,much appreciated

Sjakie43

Bloodwych · 12 December 2009, 18:29

There are some hidden files in the LITE too, like the .backdrop file. Also the drawers left out on the bottom of the Workbench are actually in the root System drawer as you can see in Dopus. They have been "left out" on the Workbench for easy access by having an entry placed in the .backdrop file.

Generally, any file without a .info icon file won't show unless the drawer has been set and snapshot to "Show->All Files".

It's best to use Dopus to copy over everything as it always lists all files. Or use the shell copy ALL command.

sjakie43 · 12 December 2009, 21:57

I will check it out ,Thanx !

Muzer · 16 December 2009, 20:01

Quote:

like the .backdrop file

I got really confused by that when using Linux, as by default it hides all files beginning with ".", and what's more, using an * in the terminal also ignores them (you must do .[^.]* as well to get all files starting with dot that aren't the parent directory (..) or current directory (.) links).

Bloodwych · 16 December 2009, 20:12

It's one of the reasons I use HDF Muzer, as the Amiga has files that other systems don't like - but if that causes problems in E-UAE as you pointed out, then a workaround would be needed.

Muzer · 16 December 2009, 20:21

Quote:

Originally Posted by Bloodwych

It's one of the reasons I use HDF Muzer, as the Amiga has files that other systems don't like - but if that causes problems in E-UAE as you pointed out, then a workaround would be needed.

Well, Linux does very well at preserving the permission bits as I said in the other thread. I just wish the hardfile function worked in E-UAE - in the original UAE it seems to be broken (it probably worked once upon at time, but you get severe corruption now), and in E-UAE it is absent.

sjakie43 · 16 December 2009, 21:12

Hi All,

Classicwb GAAE works but....

When i copy some Whd Demos i cant quit the demos...

F10 doesnt work,can i look at the settings somewhere?
Sometimes the opening screen says Prtscr instead of F10,
Both are NOT working.

How come?>

Sjakie43

sjakie43 · 16 December 2009, 21:16

And Sometimes a key works but then i get some gfx garble.

Sjakie43

Bloodwych · 16 December 2009, 22:05

Strange. Are you using an official WHDLoad key file? Or is it unregistered?

The settings for the quit key are in the S/whdload.prefs file. You can also access it via Settings->Startup menu.

sjakie43 · 16 December 2009, 22:27

I have the unregistered whdload

I will check the quit key settings ,thanx!

Sjakie43

sjakie43 · 16 December 2009, 23:59

It says > Quitkey-$5a ,thats a diff key than the F10 .

I have edited it into $59, that should be F10.

I have tried it out,still no quit key here...

Sjakie43

12 December 2009, 15:36	#1
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	ClassicWB GAAE Hi again, I want to install this Classicwb on my amiga 500. I have my DH0 and i have the content of the HDF. I have copied the contents of the hdf to DH0. Boots up and....Couldnt load L:tooldaemon-handler? It also cannot open whdload tool? I did it exact the same way as my Amiga 1200(classicWBlite) and that one is bootingand has NO probs? What have i done wrong? Sjakie43

16 December 2009, 21:12	#16
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	Demos Hi All, Classicwb GAAE works but.... When i copy some Whd Demos i cant quit the demos... F10 doesnt work,can i look at the settings somewhere? Sometimes the opening screen says Prtscr instead of F10, Both are NOT working. How come?> Sjakie43

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GAAE and 3.1 ROM colours messed up	Arnie	project.ClassicWB	7	30 January 2012 10:37
CW-GAAE 4GB microdrive boot time - stock 1MB A600 w/ 37.300	mancalledSun	support.Hardware	31	28 March 2010 06:33
A600 IDE CF GAAE Edition	BrooksterMax	project.ClassicWB	7	09 October 2009 09:52
ClassicWB GAAE	Vikingex	project.ClassicWB	12	25 January 2008 20:34
ClassicWB GAAE (Green Amiga Alien Edition - Workbench 2.1)	Bloodwych	project.ClassicWB	0	14 April 2004 11:59

12 December 2009, 15:43	#2
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	I also noticed that on my DH0 i have 25mb in use, but the hdf has 28mb in use,i copied everything so what is wrong? I must have forgotten something.... Sjakie43

12 December 2009, 15:46	#3
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	Not sure. If it's working from the HDF in WinUAE, it should be working on DH0: from the real Amiga. Did you use Dopus to copy everything over from with WinUAE? How did you copy the files over?

12 December 2009, 15:48	#4
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	The same way as with my amiga 1200(classicwbLite). Just drag and drop

12 December 2009, 15:50	#5
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	I have double checked the contents of the Hdf and the DH0 folder. Its strange that theres a 3mb difference in use though...

12 December 2009, 15:52	#6
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	Its strange cause when i did the Amiga 1200 there was no difference in Hd space use. Boggling.....

12 December 2009, 15:53	#7
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	I would try opening Dopus, select all the HDF ClassicWB files in one window and copy them to the root of your real Amiga hard drive in the other. The difference may be down to you not selecting hidden files and folders.

12 December 2009, 15:55	#8
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	I have to take a shower,,,,, I will try it in an hour or so.... Thanx for the advice, i will try Dopus. Sjakie43

12 December 2009, 15:57	#9
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	Ok, no problem. To see what I mean, run the ClassicWB GAAE HDF, open the main System drawer and go to the menu "window->show->all files". It looks like you failed to drag those drawers over. In the GAAE, some drawers are hidden compared to the LITE.

12 December 2009, 17:22	#10
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	YES, it works now! So i dont have to re check the ClassicWBLite for hidden files? Thanx Bloodwych,much appreciated Sjakie43

12 December 2009, 18:29	#11
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	There are some hidden files in the LITE too, like the .backdrop file. Also the drawers left out on the bottom of the Workbench are actually in the root System drawer as you can see in Dopus. They have been "left out" on the Workbench for easy access by having an entry placed in the .backdrop file. Generally, any file without a .info icon file won't show unless the drawer has been set and snapshot to "Show->All Files". It's best to use Dopus to copy over everything as it always lists all files. Or use the shell copy ALL command.

12 December 2009, 21:57	#12
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	I will check it out ,Thanx !

16 December 2009, 20:12	#14
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	It's one of the reasons I use HDF Muzer, as the Amiga has files that other systems don't like - but if that causes problems in E-UAE as you pointed out, then a workaround would be needed.

16 December 2009, 21:16	#17
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	And Sometimes a key works but then i get some gfx garble. Sjakie43

16 December 2009, 22:05	#18
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	Strange. Are you using an official WHDLoad key file? Or is it unregistered? The settings for the quit key are in the S/whdload.prefs file. You can also access it via Settings->Startup menu.

16 December 2009, 22:27	#19
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	I have the unregistered whdload I will check the quit key settings ,thanx! Sjakie43

16 December 2009, 23:59	#20
sjakie43 DJ Join Date: Dec 2006 Location: Holland Age: 53 Posts: 445	It says > Quitkey-$5a ,thats a diff key than the F10 . I have edited it into $59, that should be F10. I have tried it out,still no quit key here... Sjakie43

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)