![]() |
![]() |
#1 |
Registered User
Join Date: Aug 2018
Location: Leeds
Posts: 6
|
2 little projects for Indivision AGA and Micro gotek
I've been working on a couple of small projects for a while now (for too long! due to severely limited time) and I thought I would share what I have done
![]() I use my A1200 exclusively with a HDMI monitor so i have an indivision AGA Mk2cr and disliked that I had a DVI cable hanging out of the back with a chunky DVI to HDMI adapter, followed by the HDMI cable. So I decided to make a little PCB that could be mounted where the RF modulator used to live with a cable to plug straight into the indivision and give me a HDMI connector at the back: As for my second little project, I have a micro gotek and was wondering about the best way to mount the encoder, screen etc and decided to make a PCB to stick out the side where a floppy disk would be inserted. I realised at this point I could imitate the look of a floppy (which i took a little too far since I imitated the size, shape and even the metal cover which won't be visible once mounted) I also use a microsd as my hard drive so I decided to incorporate an extender into the adapter. Finally, as my Amiga has a picoPSU inside and i've been hanging the power cable out the back of the case, I added a power switch and barrel jack to the design that would plug into the power adapter inside the Amiga (I probably over engineered the whole thing but, meh) Apologies for the dust on the PCB, i've been sitting on this for a while The board can also take the thinner style of led screen as seen below (still covered in flux and with a really badly cut label stuck on hah) All thats left is to improve the floppy label sticking on the back and mount it half inside my A1200 somehow. I was thinking something 3D printed that would clip/screw onto the PCB and then could screw from the bottom of the case through the original floppy mounting holes? I'm not sure, I have zero 3d printing experience. |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2012
Location: United Kingdom
Posts: 3,225
|
This is pretty awesome! Where did you get PCB made on a single scale?
|
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2018
Location: Leeds
Posts: 6
|
|
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2017
Location: Ireland
Posts: 777
|
Do you any plans to sell these extra PCBs?
|
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2018
Location: Leeds
Posts: 6
|
I'm more than happy to sell the little HDMI PCBs. I have some spare cables, hdmi connectors etc so i could sell a few of them complete too if anyone wanted one.
As for the floppy PCB, I'm doing some sketchy things with it for the label to sit flat. I used through hole parts as they were easier/cheaper to source (finding surface mount switches and rotary encoders proved difficult and a little pricey) so I had to file down some parts for the label to fit right. I made that decision as I didn't mind for my own use, but not so sure for other people? But i could easily redesign it to use surface mount parts instead if i can find a good supply and people wanted them. |
![]() |
![]() |
#6 | |
Registered User
Join Date: Feb 2017
Location: Ireland
Posts: 777
|
Quote:
Nice, I'd be interested in buying one if you have the time to make another. How much would it cost roughly? |
|
![]() |
![]() |
#7 | |
Registered User
Join Date: Aug 2018
Location: Leeds
Posts: 6
|
Quote:
for the floppy PCB, if you're comfortable with it as is I have plenty of time to make some up, I'd need to check costs of the parts list but i'd guess around £20 + something for postage (probably cheaper, i'd need to check the costs of all the parts tonight, i'm not interested in making money from this, it would be more about covering costs) If you would prefer i redesign the floppy PCB, probably be a couple of weeks since I have some deadlines coming up soon that I need to focus on first. No idea on pricing on that one but it would be more than the current one, I could get a better idea on cost tonight when I get home. |
|
![]() |
![]() |
#8 | |
Registered User
Join Date: Feb 2017
Location: Ireland
Posts: 777
|
Quote:
Will send you a pm and sort something out. |
|
![]() |
![]() |
#9 |
Registered User
Join Date: May 2020
Location: Surrey / UK
Posts: 111
|
Hello.
I just received my Indivision MK3 and I'd LOVE one of those little PCBs to use my vacant RF Modulator slot for the HDMI port. Can I purchase one of these? It's EXACTLY what I've been looking for! (Love the Floppy PCB by the way, excellent job) |
![]() |
![]() |
#10 |
Blitter
Join Date: Aug 2017
Location: England
Posts: 50
|
|
![]() |
![]() |
#11 |
Registered User
Join Date: May 2020
Location: Surrey / UK
Posts: 111
|
I've sent a DM, so fingers crossed. @demon-knight - that looks great - nice and tidy.
Did it screw into existing holes on the board? |
![]() |
![]() |
#12 |
Registered User
Join Date: Jun 2014
Location: Uckfield, UK
Age: 53
Posts: 195
|
I would be interested in one of the HDMI pcb's
|
![]() |
![]() |
#13 |
Blitter
Join Date: Aug 2017
Location: England
Posts: 50
|
|
![]() |
![]() |
#14 |
Junior Member
|
I would like some of those of HDMI ports aswell!
Exactly what I need for some A1200 restos I am doing. |
![]() |
![]() |
#15 |
Registered User
Join Date: Nov 2022
Location: PERTH, AUSTRALIA
Posts: 2
|
Any chance anybody knows of these still available anywhere?
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Micro Gotek | demon-knight | Hardware pics | 7 | 01 January 2019 14:07 |
SCSI to Micro SD Interface Adapter with more than one Micro SD Card? | Toki | support.Hardware | 10 | 18 February 2018 10:10 |
[WTB] Indivision AGA (for CD32/4000) + Indivision ECS | Seaside | MarketPlace | 3 | 15 March 2012 22:03 |
Trading my Indivision AGA for an Indivision ECS | 8bitbubsy | Swapshop | 3 | 11 May 2011 23:02 |
Proposal: Split Amiga projects and PC projects? | andreas | project.Amiga Game Factory | 4 | 12 February 2008 12:00 |
|
|