3D Demo by Anarchy issue?

Radertified · 14 February 2022, 22:19

I'm not sure if this is a slave issue or a WinUAE config issue but I've tried many configs (cycle exact, JIT, 020/030/040, etc.) and nothing seems to help so I'm leaning towards slave.

Early in the demo (first couple of minutes) I found the red part of the cube does not show:

Immediately after, the glenz vectors are not transparent:

Booting from a normal A500 config with the disks works fine for both sequences.

Any chance someone can test the slave on a real Amiga to see if it's a slave issue or WinUAE/config issue?

Thanks!

Superman · 15 February 2022, 11:22

I had a quick test on my A1200 with TF1230 and the red part was certainly present. The purple shape in the next part looked identical to your picture though (as in not transparent) although the colours look slightly different.

Seiya · 15 February 2022, 12:03

from Demobase V3 (Gamebase) the demo working perfect:

maybe could be depend from some WinUAE version. In Demobase V3 it is 3.6.1 version.

Radertified · 15 February 2022, 15:14

Thanks guys! Seems like it's a config issue then, so I'll be looking into my settings

Radertified · 16 February 2022, 02:17

Turns out the issue was the "More Compatible" option in WinUAE's CPU tab. Switching it OFF fixed everything, which seems strange to me. This is on any 68020+ CPU.

14 February 2022, 22:19	#1
Radertified Registered User Join Date: Jan 2011 Location: - Posts: 728	3D Demo by Anarchy issue? I'm not sure if this is a slave issue or a WinUAE config issue but I've tried many configs (cycle exact, JIT, 020/030/040, etc.) and nothing seems to help so I'm leaning towards slave. Early in the demo (first couple of minutes) I found the red part of the cube does not show: Immediately after, the glenz vectors are not transparent: Booting from a normal A500 config with the disks works fine for both sequences. Any chance someone can test the slave on a real Amiga to see if it's a slave issue or WinUAE/config issue? Thanks!

15 February 2022, 11:22	#2
Superman Super Member Join Date: Sep 2014 Location: Wakefield Age: 48 Posts: 1,334	I had a quick test on my A1200 with TF1230 and the red part was certainly present. The purple shape in the next part looked identical to your picture though (as in not transparent) although the colours look slightly different. Attached Thumbnails Last edited by Superman; 15 February 2022 at 11:39.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anarchy's Hardcore Demo - How the hell are you meant to use this LHA?	Foebane	Retrogaming General Discussion	6	11 June 2021 03:56
Copper Demo Issue	DaveInFL	Coders. Asm / Hardware	8	24 May 2021 22:37
Anarchy Demo Group / Judge Drokk \| Retro Island Diskettes EP 6	SuperPlay	News	2	05 July 2018 21:37
Demo packs from the 1991 Anarchy Easter Conference	Ziaxx	request.Demos	3	08 February 2010 17:09
3D Demo 2 (Anarchy) scrolling problems	andreas	support.Demos	3	29 September 2002 16:43

15 February 2022, 12:03	#3
Seiya Registered User Join Date: Nov 2014 Location: Italy Posts: 2,373	from Demobase V3 (Gamebase) the demo working perfect: maybe could be depend from some WinUAE version. In Demobase V3 it is 3.6.1 version.

15 February 2022, 15:14	#4
Radertified Registered User Join Date: Jan 2011 Location: - Posts: 728	Thanks guys! Seems like it's a config issue then, so I'll be looking into my settings

16 February 2022, 02:17	#5
Radertified Registered User Join Date: Jan 2011 Location: - Posts: 728	Turns out the issue was the "More Compatible" option in WinUAE's CPU tab. Switching it OFF fixed everything, which seems strange to me. This is on any 68020+ CPU.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)