PAL HiRes Wrong Aspect Ratio

Leandro Jardim · 17 March 2019, 21:09

I have another type of problem, this is with the screen's aspect ratio. I configured the WinUAE filter like in the first screenshot, but when I enable Resolution autoswitch what I get is a non-square screen in the second screenshot.

I attached the config too, in case you want to have a look on it.

Toni Wilen · 25 March 2019, 18:30

None of the "not full" scaling options handle different aspect ratios due to doubling changes. This needs to be fixed someday, not yet sure how without side-effects..

21stcentury · 26 March 2019, 16:52

Choose "Overscan blanking" instead of "Integer Scaling". If your display is in Fullscreen, put 1.90 in horizontal and vertical size.

Leandro Jardim · 28 March 2019, 01:27

Quote:

Originally Posted by 21stcentury

Choose "Overscan blanking" instead of "Integer Scaling". If your display is in Fullscreen, put 1.90 in horizontal and vertical size.

Thanks, but here it does not work right when I choose this along with "autoswitch resolution". Or is there something I did not realize?

Anyway, sorry if it was my mistake, if I didn't explain it right.

I hope you guys don't stop talking to me because of my problems with the English language.

Mclane · 28 March 2019, 11:06

Your English is almost certainly better than our command of your usual language, so don't worry about that. You are perfectly understandable and probably speak it better than some people who post here whose language is normally English

Leandro Jardim · 30 March 2019, 00:19

Wow, nice words Mclane! Thank you!

21stcentury · 31 March 2019, 10:21

Don't worry, I'm French and my english is not very good as well. Disable "Autoswitch", you don't need it.

Can you post a picture of your display menu ?

Leandro Jardim · 04 April 2019, 20:54

Quote:

Originally Posted by 21stcentury

Don't worry, I'm French and my english is not very good as well. Disable "Autoswitch", you don't need it.

Thank you too.

Quote:

Originally Posted by 21stcentury

Can you post a picture of your display menu ?

Yes, I will post a screenshot of a recreated config specially for you.

PS. Sorry for the late reply.

21stcentury · 06 April 2019, 23:20

OK :

- Change Fullscreen to Native instead of 1920x1080
- Tick "VGA mode resolution autoswitch"
- Choose disabled on "Resolution autoswitch"
- Tick "Vertical" in "Centering"

and don't forget what I said in the previous post for the Filter menu

- Overscan blanking instead of Integer scaling
- 1.90 in horizontal and vertical size

With these values, I think it will give you a good result.

Leandro Jardim · 07 April 2019, 13:12

Thank you 21stcentury, now it's working very well.

17 March 2019, 21:09	#1
Leandro Jardim Registered User Join Date: Nov 2009 Location: Legoland Age: 45 Posts: 1,461	PAL HiRes Wrong Aspect Ratio I have another type of problem, this is with the screen's aspect ratio. I configured the WinUAE filter like in the first screenshot, but when I enable Resolution autoswitch what I get is a non-square screen in the second screenshot. I attached the config too, in case you want to have a look on it. Attached Thumbnails Last edited by Leandro Jardim; 27 March 2019 at 13:38.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aspect ratio wrong?	Leandro Jardim	support.WinUAE	2	24 September 2013 10:13
Wrong aspect ratio	Leandro Jardim	support.WinUAE	5	24 September 2013 04:41
Custom ratio for aspect ratio correction?	rsn8887	request.UAE Wishlist	4	16 April 2013 17:49
Always blurry chars - wrong aspect ratio?	1988	support.WinUAE	26	07 July 2011 16:36
iGame screenshot aspect ratio wrong?	emuola	support.Apps	3	16 September 2010 05:53

25 March 2019, 18:30	#2
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,517	None of the "not full" scaling options handle different aspect ratios due to doubling changes. This needs to be fixed someday, not yet sure how without side-effects..

26 March 2019, 16:52	#3
21stcentury Registered User Join Date: Jul 2014 Location: Paris Posts: 73	Choose "Overscan blanking" instead of "Integer Scaling". If your display is in Fullscreen, put 1.90 in horizontal and vertical size.

28 March 2019, 11:06	#5
Mclane Old retro god. Join Date: Apr 2002 Location: Northolt, West London Age: 62 Posts: 857	Your English is almost certainly better than our command of your usual language, so don't worry about that. You are perfectly understandable and probably speak it better than some people who post here whose language is normally English

30 March 2019, 00:19	#6
Leandro Jardim Registered User Join Date: Nov 2009 Location: Legoland Age: 45 Posts: 1,461	Wow, nice words Mclane! Thank you!

31 March 2019, 10:21	#7
21stcentury Registered User Join Date: Jul 2014 Location: Paris Posts: 73	Don't worry, I'm French and my english is not very good as well. Disable "Autoswitch", you don't need it. Can you post a picture of your display menu ?

06 April 2019, 23:20	#9
21stcentury Registered User Join Date: Jul 2014 Location: Paris Posts: 73	OK : - Change Fullscreen to Native instead of 1920x1080 - Tick "VGA mode resolution autoswitch" - Choose disabled on "Resolution autoswitch" - Tick "Vertical" in "Centering" and don't forget what I said in the previous post for the Filter menu - Overscan blanking instead of Integer scaling - 1.90 in horizontal and vertical size With these values, I think it will give you a good result.

07 April 2019, 13:12	#10
Leandro Jardim Registered User Join Date: Nov 2009 Location: Legoland Age: 45 Posts: 1,461	Thank you 21stcentury, now it's working very well.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)