23 December 2003, 03:48 | #1 |
Posts: n/a
|
Problem installing Bloodwych's Copper Workbench
I follow the directions for the WinUAE install but after it installs, the amiga will not boot from the HD. It sits at the CLI prompt.
It's been almost 10 years since I messed with anything remotly amiga. .... i know im missing somthing. Can someone help? Keith |
23 December 2003, 12:43 | #2 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
When you inserted the Workbench 3 adf after the onscreen request, did you leave it in the drive? It sounds like the copyright files from workbench 3 have not been copied onto the hdf.
|
25 December 2003, 02:14 | #3 |
Posts: n/a
|
Oh does it have to be 3.0 Cause I'm using the 3.1 disks....
|
25 December 2003, 02:21 | #4 |
Posts: n/a
|
I just attempted a re-install.. The installer never asks for the disks. I had workbench31 in DF1 the whole time.
|
25 December 2003, 02:47 | #5 |
Registered User
Join Date: Feb 2003
Location: Manchester, UK
Posts: 97
|
Use a copy of the workbench 3.1 disk and rename it 3.0. Works a treat!
|
25 December 2003, 07:48 | #6 |
Posts: n/a
|
Ok no luck still..
Here is what happens 1. I create the HDF 2. I boot using WB3.1 disk 3. I format the HDF 4. Reboot 5. Add PC drive to Hardfiles 6. Copy Copper.zip to HDF (the only Harddrive) 7. REboot with copper_install.adf 8. It inflates a lot of files 9. It says thanks for installing....please remove disk and reboot 10 I do so.. 11 Now it doesnt boot...it just sits there at the CLI.... Any ideas? What am I doing wrong? |
25 December 2003, 15:49 | #7 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
Strange. What version is it? Is it one of the latest from this page
I don't think anyone else has had this problem, it should ask for the WB 3 disk before unzipping the files. EDIT: I've just re-read your post and you're using the "Copper_install.adf" instead of the "ClassicWB_Install.adf". The former is for installing the copper addon pack AFTER you've installed the ClassicWB. The latter is the actual classicwb installation disk. It sounds like you've only downloaded the copper addon pack. You need to download the classicwb first!!!!! Go back to the download page, grab either the FULL, ADV or ADV SP (need only 1) then download the corresponding copper addon pack. Install the classicwb, then the addon pack. Use the correct pack first and everything should work fine. Last edited by Bloodwych; 25 December 2003 at 16:27. |
25 December 2003, 21:52 | #8 |
Posts: n/a
|
Using min specs as in the txt file.
Only diff is 3.1 ROMS Everything checks out until the install starts... I get a unable to use TZ somethng... then some text flys by real fast...about 4 lines of it and about 10 seconds after I begin it tells me its done...that cant be right. Im going to try another pack to see if it will install. |
25 December 2003, 23:50 | #9 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
Thalor, I'm sure all the packs work fine.
I'm not sure you've read my post above however - you need to install the ClassicWB before the copper addon pack. The TZ comment is normal - ignore, just means a timestamp wasn't added to the archive. |
26 December 2003, 00:40 | #10 | |
Zone Friend
Join Date: Jun 2003
Location: Sweden
Age: 44
Posts: 716
|
Quote:
|
|
26 December 2003, 01:37 | #11 |
Posts: n/a
|
I did download the correct installer...(approx 18 meg)
I was using the copper addon at first but then tried the correct one. Just Dled ClassicWB_ADV_V6.... (18,149KB) Gonna try this one. |
26 December 2003, 01:57 | #12 |
Posts: n/a
|
Ok attempted with the different pack..I dont know what Im doing wrong. I got the ClassicWB. It finds my 3.0 Workbench disk no problems at all...goes to install...only puts the files C and S on my AmigaHD HD0: and tells me its done.
these are my exact steps. Load WinUAE Set config to match or better min specs Add Hard Drive called AmigaHD.hdf Add PC drive where system.zip is Load with Workbench 3.0 Format Hard Drive Copy system.zip to AmigaHD Reboot with ClassicWB_Install.adf in DF0: Welcome screen comes up --> Hit Return Warning about HD0: --> Hit return Insert 3.0 disk screen -->Put in Workbench30.adf in DF0: Hit ok Hit return It checks the version and says Valid Version Found. I hit Return It takes maybe 5 seconds and says its done. I reboot with no floppies. It comes to CLI screen and sits If I boot with workbench disk and look at my Amiga HD it only has C and S files. Im at a loss. --Update-- I managed to see the error on the screen while installing... It says Cannot find DH0:System.zip.zip period. I've tried renaming system.zip to just system....no luck that way either. T Last edited by Thalor; 26 December 2003 at 02:04. |
26 December 2003, 14:16 | #13 |
Registered User
Join Date: Apr 2002
Location: Germany
Age: 43
Posts: 745
|
As a quick workaround an test you can try to rename the file to "system.zip.zip" as it is requested.
|
27 December 2003, 13:19 | #14 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
Make sure the hdf file is called dh0: under device. WinUAE normally does this automatically when you add a hdf file.
For whatever reason, it's failing to find "System.zip" on DH0: The path it looks for is "DH0:System.zip". If the file is there, it should work. I've just checked the install disk and no typo is there. Plus I'm positive others have had this working fine. |
27 December 2003, 13:37 | #15 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
Some pics
Make sure your "AmigaHD.HDF" file is device DH0: |
27 December 2003, 13:39 | #16 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
Boot from the workbench 3 disk, format the HDF and copy "system.zip" over.
|
27 December 2003, 13:41 | #17 |
Moderator
Join Date: Jun 2001
Location: I'm behind you!
Posts: 3,763
|
Use the ClassicWB install disk, and off you go!
I've just tested the package I have on my hard drive and it works fine. You should see the files inflating like shown below. |
27 December 2003, 18:43 | #18 |
Posts: n/a
|
Ok I manually unzipped the file on the amiga and this is the error I get.
This is what I get...as you can see DH0: takes me to the correct drive. It is the only HD on the system, and it has the file. |
27 December 2003, 18:50 | #19 |
Registered User
Join Date: Apr 2002
Location: Germany
Age: 43
Posts: 745
|
He doesn't recognise it as a zip archive. Perhaps the file is corrupted. Did you already try downloading it again ?
|
27 December 2003, 19:06 | #20 |
Posts: n/a
|
Yes ive tried it 3 times....twice with different archives.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Combining copper scrolling with copper background | phx | Coders. Asm / Hardware | 16 | 13 February 2021 12:41 |
Copper effect problem | Steve | support.WinUAE | 3 | 25 June 2011 14:05 |
Classic Workbench 1.3 :( (aimed at Bloodwych) | Kitty | project.ClassicWB | 1 | 04 October 2010 16:17 |
Bloodwych workbench on winuae | synchro | project.ClassicWB | 14 | 15 June 2009 20:29 |
Installing Workbench 3.1 | Hicks | New to Emulation or Amiga scene | 1 | 05 January 2003 19:45 |
|
|