For Sale: Amiga parts & pieces

Pheonix · 09 February 2017, 03:56

Sorry. All gone

Pheonix · 09 February 2017, 03:58

The remaining Pics.

EugeneNine · 09 February 2017, 13:09

Define 'Should be working'. I need an A2000 board but 'should' sounds like kind of a gamble to me.

Pheonix · 09 February 2017, 13:22

It was working about a year ago when I was troubleshooting a problem which turned out to be the PSU. I'll pull my current board out of my machine and test it though if you want. I'll start on that right now, actually.

Any of the parts that say "should" be working, were actually working when I used them last, and they should be working now. I just haven't taken them out and gone through the process of installing them to make sure. The items that say "unknown" are those that I haven't tested at all. Either because I don't have what I need to test them, or I never tried them out in the first place. They just came with a batch of other stuff.

Pheonix · 09 February 2017, 14:44

OK, price and condition updated. Made a startling discovery. When I first turned it on, got a red screen (kickstart failure.) Discovered that the 2.04 chip I had put in it when I packed it away was actually a 2.05. Reading the kickstart versions, 2.05 was only made for the 600 to support specialized HW. Don't know if that had anything to do with it, but I pulled it and moved my 2.04 chip from my A2000 over and now I get a green screen (Chip RAM failure.) Played with the jumpers a bit (every last one was open for some reason. After about an hour decided to just sell it as non-functional. So, good call on that. It "was" working, though I was wrong, it was closer to 2 years ago. I remember putting my extra "2.04" chip in in and packing it away as a backup/parts piece.

KronusOfChaos · 09 February 2017, 16:20

If EugeneNine does want the a2000 mb. I'll take it.

EugeneNine · 09 February 2017, 16:51

Thanks. I'll pass then. Mine does the same green screen

dalek · 10 February 2017, 01:11

For the A2000 - try reseating the Agnus chip. Common problem for boards that have been stored for a long time that green screen.

Pheonix · 10 February 2017, 01:53

That's the third thing I did. First I swapped the 2.05 kickstart out for the 2.04 (known to work fine in a 2000, because it was in my other board.) Then I migrated all my jumpers. Then I reseated the Agnus. Reseated the Denise. I went back over the jumpers again. I gave it up as a lost cause.

EugeneNine · 10 February 2017, 03:49

I reseated everything on mine. Mine had a leaked battery and some of the pins of the cpu socket were pretty bad so I ordered and replaced it but still no go. I need to start tracing signals.

JimDrew · 26 February 2017, 18:01

That EMPLANT board is the Deluxe model, and based on the red labeled PEEL chip, it also has the e586DX upgrade. It's worth more than $50 if it works.

amigoun · 26 February 2017, 19:31

Quote:

Originally Posted by JimDrew

That EMPLANT board is the Deluxe model, and based on the red labeled PEEL chip, it also has the e586DX upgrade. It's worth more than $50 if it works.

Is there any benefit of Emplant including e586dx compared to software only PCx?

CoCan · 26 February 2017, 20:17

A refreshing change from "comes from a smoke-free, pet free home"

Pheonix · 26 February 2017, 20:18

Quote:

Originally Posted by JimDrew

That EMPLANT board is the Deluxe model, and based on the red labeled PEEL chip, it also has the e586DX upgrade. It's worth more than $50 if it works.

Maybe, but I have no idea if it works or not, and absolutely no current way to test it

Decided to play it safe.

JimDrew · 11 April 2017, 00:49

Quote:

Originally Posted by amigoun

Is there any benefit of Emplant including e586dx compared to software only PCx?

PCx can use the EMPLANT (as can FUSION) for better compatibility. The red PEEL unlocks one of the VIAs on the EMPLANT so it can function as the system timer for the PC. It can generate interrupts and such more accurately than the Amiga's multitasked interrupt system can.

Pyromania · 06 February 2021, 17:33

Do you still have the Beetle mouse for sale?

Pheonix · 06 February 2021, 23:56

I'm afraid not

forgot about this thread, need to close it down. May have a few bits of if left, but most of it's gone.

Rod_cl · 28 February 2021, 20:13

Hi,
could you post any still to sell items?
Best

Pheonix · 28 February 2021, 20:40

Don't currently have any Amiga HW available. Have some IDE hard drives & PC hardware sitting in a box. Have some software & manuals I haven't organized in ages. That's about it, right now

09 February 2017, 03:56	#1
Pheonix Registered User Join Date: Aug 2009 Location: Waco USA Posts: 253	For Sale: Amiga parts & pieces Sorry. All gone Attached Thumbnails Last edited by Pheonix; 06 February 2021 at 23:57. Reason: Tested A2000 MB, updated condition & pricing

09 February 2017, 03:58	#2
Pheonix Registered User Join Date: Aug 2009 Location: Waco USA Posts: 253	Rest of the pics... The remaining Pics. Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga spare parts For sale	J4kBurn	MarketPlace	17	22 December 2010 00:45
Wanted : Amiga 3000T disk drives & parts	THX1138	MarketPlace	1	04 June 2010 21:56
Amiga 1200 parts for sale	Vars191	MarketPlace	18	06 January 2009 13:42
Selling some Amiga bits & pieces	AMIGAZ	MarketPlace	0	10 February 2008 10:12
For Sale parts for a Amiga A2500 A2000	Stormrider	MarketPlace	7	13 February 2006 01:32

09 February 2017, 13:09	#3
EugeneNine Registered User Join Date: Aug 2016 Location: Ohio Posts: 185	Define 'Should be working'. I need an A2000 board but 'should' sounds like kind of a gamble to me.

09 February 2017, 13:22	#4
Pheonix Registered User Join Date: Aug 2009 Location: Waco USA Posts: 253	It was working about a year ago when I was troubleshooting a problem which turned out to be the PSU. I'll pull my current board out of my machine and test it though if you want. I'll start on that right now, actually. Any of the parts that say "should" be working, were actually working when I used them last, and they should be working now. I just haven't taken them out and gone through the process of installing them to make sure. The items that say "unknown" are those that I haven't tested at all. Either because I don't have what I need to test them, or I never tried them out in the first place. They just came with a batch of other stuff.

09 February 2017, 14:44	#5
Pheonix Registered User Join Date: Aug 2009 Location: Waco USA Posts: 253	OK, price and condition updated. Made a startling discovery. When I first turned it on, got a red screen (kickstart failure.) Discovered that the 2.04 chip I had put in it when I packed it away was actually a 2.05. Reading the kickstart versions, 2.05 was only made for the 600 to support specialized HW. Don't know if that had anything to do with it, but I pulled it and moved my 2.04 chip from my A2000 over and now I get a green screen (Chip RAM failure.) Played with the jumpers a bit (every last one was open for some reason. After about an hour decided to just sell it as non-functional. So, good call on that. It "was" working, though I was wrong, it was closer to 2 years ago. I remember putting my extra "2.04" chip in in and packing it away as a backup/parts piece.

09 February 2017, 16:20	#6
KronusOfChaos Registered User Join Date: Mar 2016 Location: Montgomery, USA Posts: 27	If EugeneNine does want the a2000 mb. I'll take it.

09 February 2017, 16:51	#7
EugeneNine Registered User Join Date: Aug 2016 Location: Ohio Posts: 185	Thanks. I'll pass then. Mine does the same green screen

10 February 2017, 01:11	#8
dalek Registered User Join Date: Nov 2014 Location: NSW/Australia Posts: 462	For the A2000 - try reseating the Agnus chip. Common problem for boards that have been stored for a long time that green screen.

10 February 2017, 01:53	#9
Pheonix Registered User Join Date: Aug 2009 Location: Waco USA Posts: 253	That's the third thing I did. First I swapped the 2.05 kickstart out for the 2.04 (known to work fine in a 2000, because it was in my other board.) Then I migrated all my jumpers. Then I reseated the Agnus. Reseated the Denise. I went back over the jumpers again. I gave it up as a lost cause.

10 February 2017, 03:49	#10
EugeneNine Registered User Join Date: Aug 2016 Location: Ohio Posts: 185	I reseated everything on mine. Mine had a leaked battery and some of the pins of the cpu socket were pretty bad so I ordered and replaced it but still no go. I need to start tracing signals.

26 February 2017, 18:01	#11
JimDrew Registered User Join Date: Dec 2013 Location: Lake Havasu City, AZ Posts: 741	That EMPLANT board is the Deluxe model, and based on the red labeled PEEL chip, it also has the e586DX upgrade. It's worth more than $50 if it works.

26 February 2017, 20:17	#13
CoCan Registered User Join Date: May 2006 Location: UK Posts: 42	A refreshing change from "comes from a smoke-free, pet free home"

06 February 2021, 17:33	#16
Pyromania Moderator Join Date: Jan 2002 Location: Chicago, IL Posts: 3,375	Do you still have the Beetle mouse for sale?

06 February 2021, 23:56	#17
Pheonix Registered User Join Date: Aug 2009 Location: Waco USA Posts: 253	I'm afraid not forgot about this thread, need to close it down. May have a few bits of if left, but most of it's gone.

28 February 2021, 20:13	#18
Rod_cl Zone Friend Join Date: Jul 2006 Location: Santiago/Chile Age: 49 Posts: 123	Hi, could you post any still to sell items? Best

28 February 2021, 20:40	#19
Pheonix Registered User Join Date: Aug 2009 Location: Waco USA Posts: 253	Don't currently have any Amiga HW available. Have some IDE hard drives & PC hardware sitting in a box. Have some software & manuals I haven't organized in ages. That's about it, right now

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)