SCSI Hard Drive Problems

Smiley · 03 May 2006, 19:01

Ok, so I have a Supra Wordsync 2000 and a 1gb scsi HD. This is the process I went through:

Turn auto-boot jumper off

Boot with supraboot disk.

Load SupraFormat

Set drive parameters as follows: Cylinders 1182
Surfaces 7

Set DH0 boot partion, size 100
Set DH1 boot partion, size 900

Click create partion info

Click quick format partions

Reboot with bootdisk

Install WB 2.0

Install Supratools

Set auto-boot jumper to on

Reboot

Amiga gets to a white screen and hangs

I have tried to set this up 3 times with no luck

Now it wont even boot with bootdisks

The wordsync was working fine with a 75mb, but I didnt set that up

No full manual available on the internet

Any ideas? Has anyone used supra scsi before?

Thanks

EDIT: Now the supraboot disks dont boot and just crash on an amigaDOS screen. I have recopiedf the disk images to new disks and the same thing happens, so now I cant reformat it!

InTheSand · 04 May 2006, 00:05

Hi,

I can't help you directly as I've not used the disk controller you've got - but it does appear that the driver disks are available here, so as long as you've got access to another Amiga, you could recreate the boot and setup disks...

- Ali

03 May 2006, 19:01	#1
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,350	SCSI Hard Drive Problems Ok, so I have a Supra Wordsync 2000 and a 1gb scsi HD. This is the process I went through: Turn auto-boot jumper off Boot with supraboot disk. Load SupraFormat Set drive parameters as follows: Cylinders 1182 Surfaces 7 Set DH0 boot partion, size 100 Set DH1 boot partion, size 900 Click create partion info Click quick format partions Reboot with bootdisk Install WB 2.0 Install Supratools Set auto-boot jumper to on Reboot Amiga gets to a white screen and hangs I have tried to set this up 3 times with no luck Now it wont even boot with bootdisks The wordsync was working fine with a 75mb, but I didnt set that up No full manual available on the internet Any ideas? Has anyone used supra scsi before? Thanks EDIT: Now the supraboot disks dont boot and just crash on an amigaDOS screen. I have recopiedf the disk images to new disks and the same thing happens, so now I cant reformat it! Last edited by Smiley; 03 May 2006 at 20:41.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted: SCSI hard drive (50-pin)	8bitbubsy	MarketPlace	9	18 May 2011 22:01
Need Help: Cant get SCSI Hard Drive recognised	CU_AMiGA	support.Hardware	9	25 January 2011 19:00
Problem with a SCSI Hard Drive...	sebmacfly	support.Hardware	31	30 July 2009 03:58
Problems setting up SCSI Hard Drive	Calgor	support.Hardware	6	20 May 2007 18:22
1gb scsi Hard Drive	Smiley	MarketPlace	2	07 May 2006 15:29

04 May 2006, 00:05	#2
InTheSand Registered User Join Date: Sep 2005 Location: Nelson, New Zealand Posts: 43	Hi, I can't help you directly as I've not used the disk controller you've got - but it does appear that the driver disks are available here, so as long as you've got access to another Amiga, you could recreate the boot and setup disks... - Ali

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)