Need some help with Classic WB and GVP TRex II

slk486 · 22 May 2010, 22:10

I'm having some trouble getting OS 3.9 to work with my GVP TRex II, as it crashes and reboots on bootup. Probably SetPatch, since I can get to CLI without Startup-Sequence. The install worked fine with the old A3640.

I've tried an upgraded Picasso96 version with BB3 and the OS39 version as well. The drivers on the disk are for WB3.1, so installing them breaks WB (can't load workbench.library).

Anyone have experience in this or a similar card (Cyberstorm 060 perhaps?).

Edit: Maybe the above is a bit too specific, so are there any special files, that need to be replaced or inserted in SS for a 060 card? Perhaps I should do a "clean" install of wb 3.9?

slk486 · 25 May 2010, 20:32

Ok, I got the TRex working, but the SCSI controller is working overtime to annoy...

I've put a 120GB ATA HD onto a SCSI-IDE adapter, and plugged into the SCSI 2 controller on the TRex.

Created 2 partitions - one for system (1.5gig) and another (7.9gig), but the large partition simply won't show up in WB - even if I use the Mounter tool (it shows it there, as well as in bootmenu). I'm thinking it could be the gvpscsi2.device, which is version 1.1, but I haven't been able to find any newer versions.

I've installed WB3.9 on the system partition just fine.

Any ideas?

22 May 2010, 22:10	#1
slk486 Registered Looser Join Date: Apr 2010 Location: Denmark Posts: 336	Need some help with Classic WB and GVP TRex II I'm having some trouble getting OS 3.9 to work with my GVP TRex II, as it crashes and reboots on bootup. Probably SetPatch, since I can get to CLI without Startup-Sequence. The install worked fine with the old A3640. I've tried an upgraded Picasso96 version with BB3 and the OS39 version as well. The drivers on the disk are for WB3.1, so installing them breaks WB (can't load workbench.library). Anyone have experience in this or a similar card (Cyberstorm 060 perhaps?). Edit: Maybe the above is a bit too specific, so are there any special files, that need to be replaced or inserted in SS for a 060 card? Perhaps I should do a "clean" install of wb 3.9? Last edited by slk486; 23 May 2010 at 08:52. Reason: Add more general question

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trex Warrior	mai	request.Old Rare Games	8	01 April 2012 00:06
Classic WB OS3.9 VS Classic WB ADV SP	fitzsteve	project.ClassicWB	6	28 December 2009 21:27
Problem with a good Game named Trex Warrior :(	Benhadad	support.WinUAE	11	28 November 2009 15:53
Is a GVP 52 MB HD useful?	ATWindsor	support.Hardware	10	17 April 2006 23:28
trex warrior & megaball 4	XoreX	support.Games	6	08 October 2001 23:09

25 May 2010, 20:32	#2
slk486 Registered Looser Join Date: Apr 2010 Location: Denmark Posts: 336	Ok, I got the TRex working, but the SCSI controller is working overtime to annoy... I've put a 120GB ATA HD onto a SCSI-IDE adapter, and plugged into the SCSI 2 controller on the TRex. Created 2 partitions - one for system (1.5gig) and another (7.9gig), but the large partition simply won't show up in WB - even if I use the Mounter tool (it shows it there, as well as in bootmenu). I'm thinking it could be the gvpscsi2.device, which is version 1.1, but I haven't been able to find any newer versions. I've installed WB3.9 on the system partition just fine. Any ideas?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)