CD mount under workbench A500 mini Amiberry 3.3

[Octopus66]

According to the Amiberry Github version 3.3 should be able to mount CD-ROM via workbench. (Fix #37)

https://github.com/BlitterStudio/ami...44fcb80b61bd3d

Version history shows v3.2
https://github.com/BlitterStudio/ami...ersion-history

Has anyone managed to get this to work? I have tried .ISO and .CUE files but AmigaDOS does not see them. I have tried mounting CD0: without success.

[Nor Bert]

Show mountlist cd0:

[Nor Bert]

Another method of handling the ISO image is to insert the ISO file in place of the HDF. On the Amiga side, install the cdfilesystem and select uaehf.device and the appropriate UNIT in the CD0 mountlist.
One drawback. The "CD/iso media" cannot be replaced

[Octopus66]

Originally Posted by Nor Bert

Show mountlist cd0:

How do I do this? The icon tooltype for CD0: shows

ACTIVATE=1
DEVICE=scsi.device
UNIT=2

I have tried a few different units without success.

[Octopus66]

Originally Posted by Nor Bert

Another method of handling the ISO image is to insert the ISO file in place of the HDF. On the Amiga side, install the cdfilesystem and select uaehf.device and the appropriate UNIT in the CD0 mountlist.
One drawback. The "CD/iso media" cannot be replaced

Cannot get this to work. I am using Amiga OS 3.2

[Seiya]

Originally Posted by Octopus66

ACTIVATE=1
DEVICE=scsi.device
UNIT=2

scsi.device is for real amiga.
In emulation with WinUAE is: uaescsi.device, unit=0
in FSUAE i think something similar.

[Octopus66]

Originally Posted by Seiya

scsi.device is for real amiga.
In emulation with WinUAE is: uaescsi.device, unit=0
in FSUAE i think something similar.

When I look at devices using Scout in Amiberry I only see scsi.device.
This is different to WinUAE which shows uaescsi.device as you say.

There is menu option in Amiberry a check box "scsi.device emulation" which I have toggled to checked, but not sure what to do next....

[Seiya]

i check better and scsi.device also in WinUAE is for Hardfile and in general harddisk settings. CD-rom filesystem should be different otherwise your cd-rom would be mounted as hardfile.

or:

maybe fs-uae working if you use cd-rom as an hardrive.

[config]
amiga_model = A4000/040
chip_memory = 2048
zorro_iii_memory = 32768
kickstart_file = amiga-os-310.rom
uaegfx.card = 1
cdrom_drive_count = 1
cdrom_image_0 = /Volumes/Amiga=S 3.9
hard_drive_0 = /dev/disk1
hard_drive_1 = WB39
hard_drive_2 = AmigaOS39
#hard_drive_0 = Hardfiles/OS39.hdf
#hard_drive_0_type = rdb
floppy_drive_volume = 0
floppy_image_0 = Floppy/Notfall Disk.adf
floppy_image_1 = Floppy/WB31_install.adf
floppy_image_1 = Floppy/WB31.adf
accuracy = 0
video_sync = off

this is a config for FS-UAE for OSX. now you have to edit cd-rom path