19 July 2021, 13:44 | #1 |
With MMU and FPU!
Join Date: Mar 2015
Location: On your mainboard
Posts: 270
|
What does HALT2 mean?
I've ripped a game using my Kryoflux. All tracks were green but when I boot it using WinUAE I get a HALT2 message. Is that a WinUAE issue or could it also be some sort of copy protection kicking in?
|
19 July 2021, 13:47 | #2 |
Registered User
Join Date: Nov 2014
Location: Italy
Posts: 2,342
|
is an issue with some config that run the game not like original computer. Exaclty i don't know what options cause that error.
|
19 July 2021, 14:10 | #3 |
With MMU and FPU!
Join Date: Mar 2015
Location: On your mainboard
Posts: 270
|
I've already tried to play with some options like cycle exact, wait for blitter, etc. but can't make it go away. It always comes up :/
|
19 July 2021, 14:37 | #4 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,502
|
HALT2 = double fault. Exception during exception processing. In case of A500 emulation (68000), most likely reason is odd supervisor stack pointer. EDIT: probably copy protection check failing and hanging the system.
Check the log for more details (address of fault) Last edited by Toni Wilen; 19 July 2021 at 14:42. |
19 July 2021, 14:43 | #5 |
With MMU and FPU!
Join Date: Mar 2015
Location: On your mainboard
Posts: 270
|
Log shows this:
Code:
15-068 [57 061=148]: Illegal instruction: 4e7b at 00FC0564 -> 00FC0582 15-074 [57 010=207]: SERIAL: period=372, baud=9600, hsyncs=14, bits=8, PC=fc2234 16-042 [106 000-000]: SNDRATE 313.0*227.0*49.920410=3546895.062012 16-042 [106 000-000]: PAL mode V=49.9204Hz H=15625.0879Hz (227x312+1) IDX=10 (PAL) D=0 RTG=0/0 56-425 [2125 147-004]: Exception 3 (1f14e573) at fc0d52 -> fff6c0d1! 56-425 [2125 147-004]: CPU halted: reason = 2 PC=00fc0d52 |
19 July 2021, 15:04 | #6 |
With MMU and FPU!
Join Date: Mar 2015
Location: On your mainboard
Posts: 270
|
|
19 July 2021, 22:04 | #7 |
Going nowhere
Join Date: Oct 2001
Location: United Kingdom
Age: 50
Posts: 8,986
|
Whats the game?
|
20 July 2021, 12:41 | #8 |
With MMU and FPU!
Join Date: Mar 2015
Location: On your mainboard
Posts: 270
|
Crystals of Arborea, German version
|
20 July 2021, 13:37 | #9 |
Registered User
Join Date: Aug 2014
Location: Zagreb / Croatia
Posts: 302
|
|
20 July 2021, 14:16 | #10 |
With MMU and FPU!
Join Date: Mar 2015
Location: On your mainboard
Posts: 270
|
Yes, of course I use CT raw. But since the protection kicks in I assume some track hasn't been ripped correctly.
|
21 July 2021, 12:01 | #11 |
Registered User
Join Date: Aug 2014
Location: Zagreb / Croatia
Posts: 302
|
I suppose that you tried up to 81 track. Maybe to try up to 83 track, but less likely, because not all drives support more than 81 track.
|
19 July 2022, 13:19 | #12 |
With MMU and FPU!
Join Date: Mar 2015
Location: On your mainboard
Posts: 270
|
So how can I properly rip the game with my Kryoflux? The copy protection track seems to be good because the game works on my A500. But when I rip the game as a CT raw file WinUAE fails with HALT2, presumably because the copy protection kicks in.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Moonstone Load State failed (HALT2) | Sent | support.WinUAE | 20 | 24 September 2017 17:03 |
|
|