![]() |
![]() |
#1 |
Posts: n/a
|
![]()
Hi
I have an A1200 with internal HDD and have noticed recently that the Floppy Drive DF0 makes a few clunking sounds when there is no disk in it and the DF0??? appears on the workbench screen. I loaded up a few games from floppy and they all booted 100% with no problems. The drive clunks also when i have booted workbench from Floppy and the drive is empty. This behaviour is erratic and sometimes disappears after several boots.I often leave the Amiga off for months at a time so could it be the drive behaving like this because it hasn't been used for a while or is it signs of a worn out/failing drive? any help would be greatly appreciated thanks |
![]() |
#2 |
Posts: n/a
|
Are you sure it's not the normal disk checking *click* sound? Amigas do that when there are no disks in the drive and is normal. Even if it is not a normal click, don't open your drive unless it's not working, you can misalign or completely kill it.
From http://de.aminet.net you can search for utilities that disable that normal disk checking sound, but only under workbench. |
![]() |
#3 |
Posts: n/a
|
I have had the machine for nearly 9 yrs and have always used a noclick command in the startup sequence script.Besides that i get the same probs when i boot workbench from floppy disc ie the df0??? icon appearing when i remove the floppy disk from the drive.
At least the drive still loads all disks when i boot from them (up till now so far) Just wondered if the drive was on its way out - they are damn expensive to purchase now,buying a second hand amiga from ebay is often cheaper ![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2001
Location: Germany
Age: 51
Posts: 3,704
|
Check the little pins in front of the drive, maybe the disk recognition pin is stuck, so it allways thinks a disk is inserted, even if you get it out of the drive
![]() |
![]() |
![]() |
#5 |
Posts: n/a
|
Thanks - i'll give that a try
|
![]() |
#6 |
Posts: n/a
|
Retroman -
Would those pins be the two black plastic ones on the left hand side of the front of the drive? thanks |
![]() |
#7 |
Posts: n/a
|
Thanks - You were 100% correct,the little plastic sensor pin was a little sticky,everything is now working properly again.
Thanks for your great help ![]() ![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2001
Location: Germany
Age: 51
Posts: 3,704
|
No Problem
![]() ![]() |
![]() |
![]() |
#9 | |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,916
|
Quote:
|
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Floppy drive timings and NTSC floppy unreliability | mark_k | support.WinUAE | 6 | 02 February 2013 22:03 |
Can I use external floppy drive as internal drive? | Mrs Beanbag | support.Hardware | 6 | 12 December 2012 19:15 |
Noisy floppy drive or drive not reading properly HD disks? | Old Fool | support.Hardware | 4 | 07 June 2010 15:09 |
Strange Amiga 1200 floppy drive... PC drive converted to amiga? | jbenam | support.Hardware | 8 | 30 March 2009 19:24 |
A600 internal floppy drive, says all my disks have bad sectors on 891 | Smiley | support.Hardware | 4 | 01 May 2005 19:26 |
|
|